Body-Solid GPR400 Owner's manual

Brand
Body-Solid
Model
GPR400
Category
Fitness, gymnastics & weight training
Type
Owner's manual

This manual is also suitable for

&
Assembly Instructions
OWNER’S MANUAL
V. GLA400-20190816
GLA400
Warning, Safety & Maintenance
2
Be sure that all users carefully read and understand all
warning, safety and maintenance labels on the machine
before each use. Failure to do so may result in death or
serious injury.
It is imperative that you retain this Owner’s Manual and be
sure all warning labels are legible and intact. Replacement
Owner’s Manuals and warning labels are available from your
local Body-Solid dealer.
If you have any questions about the operation, set up or
maintenance of this machine please call our customer service
department at 1 (800) 556-3113.

#DWRULE-4

#DWRULE-4
Table of Contents
3
• SAFETY INSTRUCTIONS.............................. PAGE 4
• PREPARATION............................................... PAGE 5
• HARDWARE ILLUSTRATION......................... PAGE 6
• PART / HARDWARE LIST............................... PAGE 10
• ASSEMBLY INSTRUCTIONS......................... PAGE 12
• EXPLODED VIEW.......................................... PAGE 23
• CONTACT PAGE............................................ PAGE 24
Important Safety Instructions
4
Beforebeginninganytnessprogram,youshouldobtainacompletephysicalexaminationfromyourphysician.
Il est conseille de subir un examen medical complet avant d’entreprendre tout programme d’exercise.
Si vous avez des etourdissements ou des faiblesses, arretez les exercices immediatement.
Antes de comenzar cualquier programma de ejercicios, deberias tener un examen sico con su doctor.
When using exercise equipment, you
should always take basic precautions,
including the following:
m ReadallinstructionsbeforeusingtheGLA400.
Theseinstructionsarewrittentoensureyoursafety
andtoprotecttheunit.
m Do not remove any safety labels from the
machine.
m Donotallowchildrenonorneartheequipment.
m Usetheequipmentonlyforitsintendedpurpose
asdescribedinthisguide.Donotuseaccessory
attachmentsthatarenotrecommendedbythe
manufacturer.Suchattachmentsmightcause
injuries.
m Wearproperexerciseclothingandshoesforyour
workout,nolooseclothing.
m Keephands,limbs,looseclothing,andlonghairwell
outofthewayofallmovingparts.
m Usecarewhengettingonorotheunit.
m Donotoverexertyourselforworktoexhaustion.
m Ifyoufeelanypainorabnormalsymptoms,stop
yourworkoutimmediatelyandconsultyour
physician.
m Neveroperateunitwhenithasbeendroppedor
damaged.Returntheequipmenttoaservice
centerforexaminationandrepair.
m Neverdroporinsertobjectsintoanyopeningin
theequipment.
m Alwayschecktheunitanditscablesbeforeeach
use.Makesurethatallfastenersandcablesare
secureandingoodworkingcondition.
m Donotusetheequipmentoutdoorsornearwater.
Personal Safety During Assembly
m Beforebeginningassembly,pleasetakethetime
toreadtheinstructionsthoroughly.
m Readeachstepintheassemblyinstructionsand
followthestepsinsequence.Donotskipahead.
Ifyouskipahead,youmaylearnlaterthatyou
havetodisassemblecomponentsandthatyou
mayhavedamagedtheequipment.
m Assembleandoperatethe GLA400onasolid,
levelsurface.Locatetheunitafewfeetfromthe
wallsorfurnituretoprovideeasyaccess.
TheGLA400 isdesignedforyourenjoyment.By
followingtheseprecautionsandusingcommonsense,
youwillhavemanysafeandpleasurablehoursof
healthfulexercisewithyourBody-SolidLat Attachment.
Afterassembly,youshouldcheckallfunctionsto
ensurecorrectoperation.Ifyouexperienceproblems,
rstrechecktheassemblyinstructionstolocateany
possibleerrorsmadeduringassembly.Ifyouareunable
tocorrecttheproblem,callthedealerfromwhomyou
purchasedthemachineorcall1-800-556-3113forthe
dealernearestyou.
Obtaining Service
PleaseusethisOwner’sManualtomakesurethatall
partshavebeenincludedinyourshipment.When
orderingparts,youmustusethepartnumberand
descriptionfromthisOwner’sManual.Useonly
Body-Solidreplacementpartswhenservicingthis
machine.Failuretodosowillvoidyourwarrantyand
couldresultinpersonalinjury.
Forinformationaboutproductoperationorservice,
checkouttheocialBody-Solidwebsiteat
www.bodysolid.comorcontactanauthorized
Body-SoliddealeroraBody-Solidfactory-authorized
servicecompanyorcontactBody-Solidcustomer
serviceatoneofthefollowing:
Toll Free: 1-800-556-3113
Phone: 1-708-427-3555
Fax: 1-708-427-3556
Hours: M-F 8:30-5:00 CST
E-Mail: [email protected]
Or write to: Body-Solid, Inc.
Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Retain this Owner’s Manual for future
reference. If you need to order replacement
parts please be prepared to provide the
following information when contacting us so
that we can assist you better.
1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Description
Preparation
5
ThankyouforpurchasingtheGLA400.ThisProductispartoftheBody-Solidlineofqualitystrengthtraining
machines,whichletsyoutargetspecicmusclegroupstoachievebettermuscletoneandoverallbody
conditioning. To maximize your use of the equipment please study this Owner’sManual thoroughly.
Body-Solidcontinuallyseekswaystoimprovetheperformance,specicationsandproductmanualsinordertoensurethatonly
superiorproductsarereleasedfromourfactories.Pleasetakethetimetocarefullyreadthroughthismanualthoroughly.Instructions
containedinthisdocumentarenotintendedtocoveralldetailsorvariationspossiblewithBody-Solidequipment,ortocoverevery
contingencythatmaybemetinconjunctionwithinstallation,operation,maintenanceortroubleshootingoftheequipment.Even
thoughwehavepreparedthismanualwithextremecare,neitherthepublishernortheauthorcanacceptresponsibilityforanyerrors
in,oromissionfrom,theinformationgiven.Shouldadditionalinformationberequired,orshouldsituationsarisethatarenotcovered
bythismanual,themattershouldbedirectedtoyourlocalBody-Solidrepresentative,ortheServiceDepartmentatBody-SolidInc.
inForestPark,Illinois.
Required Tools
Thebasictoolsthatyoumustobtainbeforeassembling
theGLA400includebutarenotlimitedto:
m StandardWrenchSet
m MetricWrenchSet
m AdjustableWrench
Installation Requirements
Followtheseinstallationrequirementswhenassembling
theGLA400:
SetuptheGLA400onasolid,atsurface.Asmooth,
atsurfaceunderthemachinehelpskeepitlevel.A
levelmachinehasfewermalfunctions.
Provideamplespacearoundthemachine.Open
spacearoundthemachineallowsforeasieraccess.
Insertallboltsinthesamedirection.Foraesthetic
purposes,insertallboltsinthesamedirectionunless
specied(intextorillustrations)todootherwise.
Leaveroomforadjustments.Tightenfastenerssuchas
bolts,nuts,andscrewssotheunitisstable,butleave
roomforadjustments.Donotfullytightenfasteners
untilinstructedintheassemblystepstodoso.
Fill out and mail the warranty card.
Assembly Tips
Readall“Notes”oneachpagebeforebeginningeach
step.
WhileyoumaybeabletoassembletheGLA400using
theillustrationsonly,importantsafetynotesandother
tipsareincludedinthetext.
Somepiecesmayhaveextraholesthatyouwillnotuse.
Useonlythoseholesindicatedintheinstructionsand
illustrations.
NOTE: Withsomanyassembledparts,proper
alignmentandadjustmentiscritical.While
tighteningthenutsandbolts,besuretoleave
roomforadjustments.
CAUTION: Obtainassistance!Ifyoufeellikeyoucan’t
assembletheGLA400byyourselfthendo
notattempttodosoasthiscouldresultin
injury.Reviewtheinstallationrequirements
beforeproceedingwiththefollowingsteps.
YourS/N#can
befoundhere
↑
45
6
GLA400 Hardware Illustration
Part#2 M12x105mmHEXHEADBOLT QTY. 2
Part#1 M16x185mmHEXHEADBOLT QTY. 4
Part#3 M12x75mmHEXHEADBOLT QTY. 2
Part#4 M10x90mmHEXHEADBOLT QTY. 2
Part#5 M10x65mmHEXHEADBOLT QTY. 2










45
7
GLA400 Hardware Illustration
Part#7 M10x40mmHEXHEADBOLT QTY. 1
Part#6 M10x45mmHEXHEADBOLT QTY. 4
Part#8 M10x20mmHEXHEADBOLT QTY. 2
Part#9 M10x45mmSOCKETHEADCAPSCREW QTY. 1
Part#10 M4x8mmSETSCREW QTY. 1










UNLESS OTHERWISE SPECIFIED:
CHECKED
SIZE
APPLICATION
TITLE:
PROPRIETARY AND CONFIDENTIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
Q.A.
FINISH
DWG. NO.
DATE
USED ON
A
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
MATERIAL
NAME
REV
DO NOT SCALE DRAWING
SCALE: 1:1
SOCKET HEAD CAP SCREW_AM
ENG APPR.
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
COMMENTS:
DRAWN
MFG APPR.
SHEET 1 OF 1
2 1
A
B
A
B
12
<COMPANY NAME>
UNLESS OTHERWISE SPECIFIED:
CHECKED
SIZE
APPLICATION
TITLE:
PROPRIETARY AND CONFIDENTIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
Q.A.
FINISH
DWG. NO.
DATE
USED ON
A
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
MATERIAL
NAME
REV
DO NOT SCALE DRAWING
SCALE: 1:1
SOCKET HEAD CAP SCREW_AM
ENG APPR.
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
COMMENTS:
DRAWN
MFG APPR.
SHEET 1 OF 1
2 1
A
B
A
B
12
<COMPANY NAME>
45
8
GLA400 Hardware Illustration
Part#12 M12 FLAT WASHER QTY. 8
Part#11 M16 FLAT WASHER QTY. 8
Part#13 M10 FLAT WASHER QTY. 12
Part#14 M10 LOCK WASHER QTY. 3
























































































45
9
GLA400 Hardware Illustration
Part#17 M10 NYLON LOCK NUT QTY. 9
Part#16 M12 NYLON LOCK NUT QTY. 4
Part#27 M12 HEX NUT
QTY. 2










Part#15 M16 NYLON LOCK NUT QTY. 4




























































































































































UNLESS OTHERWISE SPECIFIED:
CHECKED
SIZE
APPLICATION
TITLE:
PROPRIETARY AND CONFIDENTIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
Q.A.
FINISH
DWG. NO.
DATE
USED ON
A
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
MATERIAL
NAME
REV
DO NOT SCALE DRAWING
SCALE: 2:1
HEX NUT M12
ENG APPR.
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
COMMENTS:
DRAWN
MFG APPR.
SHEET 1 OF 1
2 1
A
B
A
B
12
<COMPANY NAME>
UNLESS OTHERWISE SPECIFIED:
CHECKED
SIZE
APPLICATION
TITLE:
PROPRIETARY AND CONFIDENTIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
Q.A.
FINISH
DWG. NO.
DATE
USED ON
A
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
MATERIAL
NAME
REV
DO NOT SCALE DRAWING
SCALE: 2:1
HEX NUT M12
ENG APPR.
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
COMMENTS:
DRAWN
MFG APPR.
SHEET 1 OF 1
2 1
A
B
A
B
12
<COMPANY NAME>
10
GLA400 Parts &Hardware List
Part# Qty Description
A
B
C
D
E
F
G
H
J
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
1
1
1
2
1
1
2
2
4
2
2
2
2
4
1
2
1
1
8
8
12
3
4
4
9
2
4
2
5
1
1
1
4
CENTER BASE FRAME
LEFT BASE FRAME
RIGHT BASE FRAME
TOP FRAME
RISER
LAT BAR
LOW ROW BAR
GUIDE ROD
PULLEY BRACKET
M16x185mmHEXHEADBOLT
M12x105mmHEXHEADBOLT
M12x75mmHEXHEADBOLT
M10x90mmHEXHEADBOLT
M10x65mmHEXHEADBOLT
M10x45mmHEXHEADBOLT
M10x40mmHEXHEADBOLT
M10x20mmHEXHEADBOLT
M10x45mmSOCKETHEADCAPSCREW
M4x8mmSETSCREW
M16 FLAT WASHER
M12 FLAT WASHER
M10 FLAT WASHER
M10 LOCK WASHER
M16 NYLON LOCK NUT
M12 NYLON LOCK NUT
M10 NYLON LOCK NUT
FOAM GRIP
PLUG
FOAM SLEEVE
SNAP LINK
STEELCHAIN(10PCS)
STEELCHAIN(4PCS)
LOW CABLE
SPACER
11
GLA400 Parts &Hardware List
Part# Qty Description
26
27
28
29
30
31
32
33
34
35
36
37
38
39
8
2
1
1
1
2
1
1
1
2
2
1
1
4
PULLEY
M12 HEX NUT
CABLE CYLINDER LOCK
SELECTOR ROD TOP BOLT
SELECTOR ROD
RUBBER DONUT
LANYARD
WEIGHT STACK PIN
TOP PLATE WEIGHT
FOAM SLEEVE
FOAM GRIP
FOAM ROLLER
TOP CABLE
SPACER
Part# Qty Description
12
STEP
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until instructed.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tightened to fully go on.
1A. AttachLeftBaseFrame(B)toPowerRack(K)using:
2 - (#1) M16x185mm Hex Head Bolt
4 - (#11) M16 Flat Washer
2 - (#15) M16 Nylon Lock Nut
1B. AttachRightBaseFrame(C)toPowerRack(K)using:
2 - (#1) M16x185mm Hex Head Bolt
4 - (#11) M16 Flat Washer
2 - (#15) M16 Nylon Lock Nut
1C. AttachCenter,Left&RightBaseFrames(A, B, C) togetherusing:
2 - (#2) M12x105mm Hex Head Bolt
4 - (#12) M12 Flat Washer
2 - (#16) M12 Nylon Lock Nut
STEP
1
AboveshowsStep1assembledandcompleted.
13
14
STEP
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until instructed.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tightened to fully go on.
NOTE: There are two options for weight installation.
2A. AttachTopPlate(#34)toSelectorRod(#30)using:
1 - (#9) M10x45mm Socket Head Cap Screw
1 - (#14) M10 Lock Washer
2B. InstallGuideRods(H) ontotheholesofCenterBaseFrame(A).
Option #1:
2C. InstallRubberDonuts(#31) andslidetothebottomoftheGuide
Rods(D).
2D. Slide15pcsofweightplates(#39) ontoGuideRods(H).Becareful
toholdguiderodssteadilywheninstallingweightplates.
2F. InstallTopPlate(#34)ontotheGuideRods.
Note: Please make sure the grooves of the weight plates are faced
down during installation.
Option #2:
2C. InstallRisers(E) andslidetothebottomoftheGuideRods(D).
2D. InstallRubberDonuts(#31) andslidetothetopoftheRisers(E).
2F. InstallTopPlate(#34)ontotheGuideRods.
STEP
2
AboveshowsStep2(Option#1)assembledand
completed.
15
AboveshowsStep2(Option#2)assembledand
completed.
16
STEP
3
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten ALL hardware at the end of STEP 3B. Some components may be
pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench
tighten to fully go on.
3A. AttachTopFrame(D)toPowerRack(L)using:
2 - (#3) M12x75mm Hex Head Bolt
4 - (#12) M12 Flat Washer
2 - (#16) M12 Nylon Lock Nut
3B. AttachTopFrame(D)toGuideRods(H)using:
2 - (#3) M10x20mm Hex Head Bolt
2 - (#13) M10 Flat Washer
2 - (#14) M10 Lock Washer
STEP
3
AboveshowsStep3assembledandcompleted.
17
18
STEP
4
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten ALL hardware at the end of STEP 4G. Some components may be
pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench
tighten to fully go on.
4A. PuttheKeyRingoftheLanyard(#32)ontothethreadedendofthe
SelectorRodTopBolt(#29).
4B. InstalltheSelectorRodTopBolt(#29),TwoM12HexNuts(#27)
ontotheTopPlate(#61).
4C. RouteTopCable(#38) andInstallfourPulleys(#38) asshownin
Step4Drawing.
2 - (#4) M10x90mm Hex Head Bolt
2 - (#6) M10x45mm Hex Head Bolt
4 - (#13) M10 Flat Washer
4 - (#17) M10 Nylon Lock Nut
4 - (#39) Spacer
2 - (J) Pulley Bracket
NOTE: Cable (#38) must go over Top Frame (D). Do not put Cable (#38)
through Top Frame (D).
4D. InstallTopCable(#38)byrstassemblingthesmallballendintotheSelector
RodTopBolt(#29)andattachingtheCableCylinderLock(#28)over
theballendofthecable.SecureitbytightenintheSetScrew(#10)
4E. InstalltheM10X40mmHexHeadBolt(#7)withtwoM10Flat
Washer(#13) throughtheslotholeoftheSelectorRodTopBolt(#29)
byfasteningtheM10NylonLockNut(#17).
4F. RouteLowCable(#24) andInstallthreePulleys(#26) asshownin
Step4Drawing.
2 - (#5) M10x65mm Hex Head Bolt
1 - (#6) M10x45mm Hex Head Bolt
2 - (#13) M10 Flat Washer
3 - (#17) M10 Nylon Lock Nut
4 - (#25) Spacer
2 - (J) Pulley Bracket
4G. AttachLowCable(#24) toCenterBaseFrame(A).
STEP
4
AboveshowsStep4assembledandcompleted.
19
Note: Some components are
pre-assembled.
20
STEP
5
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts,
they must be wrench tightened to fully go on.
5A. AttachLatBar(F)totheSnapLinkofTopCable(#38).
5B. AttachLowRowBar(G)totheSnapLinkofLowCable(#24).
NOTE:
Cable Tension can be adjusted at several locations by adjusting:
1. holes of Pulley Brackets (J)
2. Chain Steel (#23)
3. Selector Rod Top Bolt (#29)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Body-Solid GPR400 Owner's manual

Brand
Body-Solid
Model
GPR400
Category
Fitness, gymnastics & weight training
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents