Advent ADE-13MP+ User manual

Category
Webcams
Type
User manual
Contents
Introduction………………………………………..2
System Requirements……………………………2
Package Contents………………………………..3
PC Camera Introduction…………………………3
Set up PC Camera……………………………….4
How to attach headset…..………………………5
Driver Installation………………………………6-8
Software Installation
Arcsoft VideoImpression 2.0……………….9-10
Live Video Playing…………………………….11
Auto Face Tracking………………………………12
Camera Specifications…………………………..13
1
Introduction
Welcome to the world of digital imaging. The following
information will help you to use your camera to its full
capabilities.
For viewing pictures or video, camera must be connected
to your personal computer.
System Requirements
z Pentium PIII 700 MHz CPU
z Free USB port
z 128MB RAM internal memory minimum
z 500MB free hard disk space
z Internet connection
z CD-ROM drive
z Windows compatible sound card and speakers
z Windows 2000/ XP
2
Package Contents
PC camera CD-disc Headset QSG
PC Camera Introduction
3
Set up PC Camera
Please manually adjust the focus to view the best image
quality.
Provide the option of PC camera at your desktop or
notebook by adjustable stand.
4
How to attach headset
Plug the provided headset into the port of your desktop or
notebook, to match the earphone symbol (green jack) and
microphone (pink jack) to the female ports of desktop or
notebook.
Note: Listening to loud sounds for prolonged periods may
permanently damage your hearing.
Before putting on the headset, turn the volume
down, then put the headset on and slowly increase
the volume until you find a comfortable listening
level.
5
Driver Installation
1. Turn on the computer and
insert CD installation disc
into your CD-ROM drive.
Select and click Driver “.
2. Click “Install” to begin the
installation.
3. Click “Finish” to exit the
wizard.
6
The next continue installation is for USB 2.0 system
4. Click “Next”
5. Click “Next”
6. Click “Finish”
7
When your webcam is connecting with PC at first time
1. Click “Next”
2. Click “Finish”
8
Software Installation
AcrSoft VideoImpression 2.0
1. Turn on the computer and
insert CD installation Disc into
your CD-ROM drive.
Select and click
“ArcSoft VideoImpression2.0”
2. Choose Setup Language
3. Click “Next”
4. Click “Yes”
9
5. Click “Next”
10
6. Click “Next”
7. Click “Finish”
Live Video Playing
AcrSoft VideoImpression 2.0
1. Click on the “VideoImpression
2.0” icon on the desktop.
2. Click “Create a New Video”
3. Click “Capture From Device”
4. Click “Record” and click “Stop” to
finish.
5. Now you are playing the video.
11
Auto Face Tracking
1. Active AMCAP, click
“Options”
2. Click “Video Capture
Filter…”
3. In “Zoom”, enable the
“Enable Face Tracking”
function.
12
Camera Specification
Image Sensor 1280 x 1024 pixels, CMOS
Lens Specification
White Balance
Exposure
Frame Rate
Focus Range
Depth of Field
PC Interface
Video Format
Audio
Video Capture Res.
Snapshot
Still Capture Res.
Flicker Control
Power
Bundled Software
F3.0, f=6.3mm, plastic lens
Auto
Auto
USB 2.0: 1280x1024 pixels @ 15fps
640x480 pixels @ 30fps
USB 1.1: 800x600 pixels @ 15fps
640x480 pixels @ 30fps
Manual focus, 1cm to infinity
50cm to infinity
USB2.0/ USB1.1
AVI
Built-in microphone
USB2.0: 1.3mega/ 640x480/ 320x240
USB1.1: 800x600/ 640x480/ 320x240
Hardware
Up to 1.3M pixels
50Hz, 60Hz
from USB port
ArcSoftware VideoImpression 2.0
Specifications are subject to change without prior notice.
13
This symbol on the product or in the instructions
means that your electrical and electronic equipment
should be disposed at the end of its life separately
from your household waste. There are separate
collection systems for recycling in the EU.
For more information, please contact the local authority
or your retailer where you purchased the product.
14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Advent ADE-13MP+ User manual

Category
Webcams
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI