Sharp LC19DV200E Operating instructions

Sharp
Brand
Sharp
Model
LC19DV200E
Category
Blu-Ray players
Type
Operating instructions

This manual is also suitable for

OPERATION MANUAL
Contents
The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from •
the actual operations.
ENGLISH
Contents ................................................................ 1
Introduction ........................................................... 2
Dear SHARP customer ................................... 2
Important Safety Precautions .......................... 2
Important Warning .......................................... 3
Trademarks ..................................................... 3
Remote control unit ........................................ 4
TV (Front view) ................................................ 5
TV (Rear view) ................................................. 5
Preparation............................................................ 7
Supplied accessories ...................................... 7
Mount the TV stand ........................................ 7
Wall mounting ................................................. 8
Installation of batteries .................................... 8
Using the remote control ................................ 8
Display the Menu Screen .......................... 8
Select an item by the remote control ......... 8
Exit the Menu Screen ................................ 8
Quick guide ........................................................... 9
Initial installation overview................................ 9
Watching TV ........................................................ 10
Daily operation .............................................. 10
Turning on/off the power ......................... 10
Changing channels ................................. 10
Selecting external video source ............... 10
Operation without a remote control ......... 10
EPG (Electronic Programme Guide) .............. 11
Teletext ......................................................... 12
Select a Teletext language ....................... 12
Using the MHEG5 application (UK only) .. 12
TV menu .............................................................. 13
Picture .......................................................... 13
Adjust picture settings ............................. 13
Use smart picture .................................... 13
HDMI overscan ....................................... 13
Audio ............................................................ 14
Adjust Audio settings .............................. 14
TV ................................................................. 14
Select a digital audio language ................ 14
Automatically install channels .................. 14
Update Scan ........................................... 15
Single RF Scan ....................................... 15
Channel Skip .......................................... 15
Channel Sort ........................................... 16
Channel Edit ........................................... 16
Analogue Ch Fine Tune ........................... 17
Features ....................................................... 17
Change picture format ............................ 17
Power Management ................................ 18
Change the time zone ............................. 18
Set the clock .......................................... 18
Automatically switch the TV on or off (On /
Off time) ............................................... 18
Automatically switch the TV to standby
(Sleep timer) ......................................... 18
No Operation Power Off ......................... 18
AV Input (Only shown in AV mode) ......... 19
Use subtitles ............................................. 19
Auto 4 : 3 Mode ........................................ 19
Reset Default ............................................ 19
Parental .......................................................... 20
Access Parental menu .............................. 20
Lock one or more channels ....................... 20
To set parental ratings ............................... 20
Set / Change password ............................ 20
DVD Operation ...................................................... 21
Disc ................................................................ 21
Playing Audio files ..................................... 22
Playing a disc .................................................. 23
Zooming (DVD/VCD) ....................................... 24
Locating desired scene (DVD/VCD/Audio CD) . 24
Changing Soundtrack Language (DVD/VCD)... 24
Subtitles (DVD) ................................................ 24
Changing angles (DVD) ................................... 25
Title selection (DVD) ........................................ 25
DVD menu (DVD) ............................................ 25
Disc status ...................................................... 25
Using HOME MENU ........................................ 25
Play mode ...................................................... 26
A-B repeat playback ................................. 26
Repeat playback ....................................... 26
Random playback ..................................... 26
Program playback ..................................... 26
Locating desired scene ............................. 27
Audio Settings menu ....................................... 27
Video Adjust menu .......................................... 28
Customizing The Function Settings ................. 28
Parental Control .............................................. 30
Language Code List ........................................ 31
Country/Area Code List .................................. 31
Connecting external devices ............................... 32
HDMI connection ............................................ 32
YPbPr (Component connection) ...................... 32
SCART connection ......................................... 33
S-Video connection ........................................ 33
Speaker / Amplifier connection ....................... 34
Inserting a CA Card ........................................ 34
Access CI Module service ......................... 34
Connecting a PC ............................................ 35
Digital connection ..................................... 35
Analogue connection ................................ 35
Supported display resolutions ................... 35
Appendix ............................................................... 36
Troubleshooting .............................................. 36
Troubleshooting-PC mode .............................. 36
Troubleshooting-DVD ...................................... 37
Specification ................................................... 38
ENGLISH
1
54B0101A_English.indd 154B0101A_English.indd 1 2/27/2010 17:23:062/27/2010 17:23:06
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the •
product. Do not use liquid cleaners or aerosol cleaners.
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to •
clean it. Chemicals may cause damage or cracks in the cabinet of the TV.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, •
swimming pool and in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing •
fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause •
the product to fall, resulting in serious personal injuries as well as damage to the product. Use only
a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product.
When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the
mounting hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, •
excessive force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover •
or block these vents and openings since insufficient ventilation can cause overheating and/or
shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface,
since they can block ventilation openings. This product is not designed for built-in installation; do
not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is
provided or the manufacturer’s instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is •
dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and •
other heatgenerating products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.•
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.•
Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high •
volume levels.
Do not display a still picture for a long time, as this could cause an afterimage to remain.•
There is power consumption always if main plug is connected.•
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and •
other dangerous conditions. Request a qualified person to perform servicing.
Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fire or •
electric shock. Exercise special caution when using the product around children.
Condensation — Moisture will form in the operating section of the player if the product is brought from cool •
surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player’s
performance will be impaired. To prevent this, let the product stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the
summer if the product is exposed to the breeze from an air conditioner. In such cases, change the location of the
product.
Disc slot — Keep your fingers well clear of the disc slot as it is closing. Failure to do so may cause serious personal •
injury.
Laser beam — Do not look into the opening of the disc slot or ventilation opening of the product to see the source of •
the laser beam. Doing so may cause sight damage.
Disc — Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious •
personal injury and product malfunction.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point
of blue, green or red. This is within product specifications and does not constitute a fault.
Introduction
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free
operation of your product, please read the Important Safety Precautions carefully before using this product.
Dear SHARP customer
Important safety precautions
WARNING
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
2
54B0101A_English.indd 254B0101A_English.indd 2 3/2/2010 11:01:113/2/2010 11:01:11
Introduction
Important Warning
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER
CORRECTLY AS INSTRUCTED.
THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE UNIT.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE
OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding
it with two hands—one hand on each side of the TV.
Wall mounting
Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
Trademarks
“HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of •
HDMI Licensing LLC.”
The “HD TV” Logo is a trademark of DIGITALEUROPE. •
DVB is a registered trademark of the DVB Project. •
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby •
Laboratories.
Manufactured under license under U.S.Patent#: 5,451,942 & other U.S. and worldwide patents issued & •
pending. DTS and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
DivX•
®
is a registered trademark of DivX, Inc., and is used under license.
This product incorporates copy protection technology that is protected by U.S. and other intellectual property •
rights. The use of Rovi Corporation’s copy protection technology in the product must be authorized by Rovi
Corporation. Reverse engineering or disassembly is prohibited.
• is a trademark of DVD Format/Logo Licensing Corporation.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such •
technology outside of this product is prohibited without a license from Microsoft.
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL •
AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.
MPEGLA.COM
3
54B0101A_English.indd 354B0101A_English.indd 3 3/2/2010 11:01:113/2/2010 11:01:11
Introduction
B (POWER)
Press to turn the LCD TV on or
enter standby mode.
Ø (INPUT SOURCE)
Select an input source.
TV/DVD
Select to operate TV/DVD.
DTV/ATV
Switches between the analogue TV
and the digital TV.
EPG
Press this button to display
electronic programme guide when
watching digital channels.
∏ (Picture format)
Select picture format to Auto / 4:3 /
16:9/ 14:9 / Cinema / Real
¬ (MUTE)
Press to toggle audio on and off.
0-9 DIGIT BUTTONS
To select a TV channel directly.
” (+/-)
Press to adjust the volume.
P (</>)
Press to select the channel.
Ë
Display programme information, if
available.
(PRE PR)
To display the previous selected TV
channel.
SKIP
/
Skip chapter/track to forward or
reverse direction.
REV/FWD /
Fast Forward/Review playback.
PAUSE
Pause picture of DVD.
PLAY
Playback.
STOP
Stop.
Remote control unit
SETUP/TV MENU
TV MENU : for TV operation - Display
menu of TV
SETUP : for DVD operation - Call up
initial setup mode.
Press to navigate and
confirm your selection.
SLOW
/
Forward/Reverse- slow motion.
OK
Memorize.
Display channel list.
DVD MENU
Display DVD menu.
RETURN
Remove setup menu.
TOP MENU
Select title.
CANCEL
Reset information in the menu.
(SUBTITLE)
Press this button to toggle off /
between available subtitle languages.
AUDIO / (SIZE)
Change sound track language.
Teletext enlargement.
PLAY MODE
Select playback mode.
(TELETEXT)
Press this button to activate Teletext.
(See page 12.)
ANGLE / (REVEAL)
Change playback angle/Reveal
hidden information such as answers
to a quiz.
ZOOM /
(SUBPAGE)
Zoom/To select the subpage when
the current page contains subpage(s).
(HOLD) / FREEZE
Press this button to stop the
scrolling of pages.
The text decoder stops receiving
data. / Press to freeze a moving
image on the screen. (Only available
when your input source is TV).
4
54B0101A_English.indd 454B0101A_English.indd 4 2/27/2010 17:23:062/27/2010 17:23:06
Introduction
TV (Front view)
B
(Standby/On) indicator
Remote control sensor
TV (Rear view)
19” 22”
AC INPUT
EJECT button
Volume +/Menu button
Volume –/Menu
button
Channel
/Menu /PLAY button
Channel
/Menu /STOP button
MENU button
INPUT SOURCE / OK button
POWER button
HEADPHONE
AV1 (SCART) INPUT
ANT. INPUT
SERVICE socket
PC/DVI AUDIO INPUT
HDMI / DVI INPUT
PC - INPUT
AV2
VIDEO and
AUDIO L/R INPUT
AV2
S-VIDEO INPUT
DIGITAL AUDIO
COAXIAL OUTPUT
COMPONENT
VIDEO and AUDIO
L/R INPUT
COMMON INTERFACE slot
5
54B0101A_English.indd 554B0101A_English.indd 5 2/27/2010 17:23:072/27/2010 17:23:07
TV (Rear view)
HEADPHONE INPUT
COMMON INTERFACE
PC/DVI AUDIO INPUT
HDMI 1 (HDMI/DVI)
HDMI 2 (HDMI)
PC-INPUT
AV 1 (SCART) INPUT
AV 2 (SCART) INPUT
COMPONENT VIDEO and
L/R AUDIO INPUT
DIGITAL AUDIO COAXIAL OUTPUT
AV 3 (VIDEO and L/R AUDIO INPUT)
ANT. INPUT
AC INPUT
AC INPUT
HEADPHONE INPUT
COMMON INTERFACE
SERVICE socket
PC/DVI AUDIO INPUT
HDMI 2 (HDMI)
HDMI 1 (HDMI/DVI)
PC-INPUT
AV 1 (SCART) INPUT
AV 2 (SCART) INPUT
COMPONENT (VIDEO and
L/R AUDIO INPUT)
DIGITAL AUDIO COAXIAL OUTPUT
AV 3 (VIDEO and L/R AUDIO INPUT)
ANT. INPUT
Introduction
26”
32”
EJECT button
Volume +/Menu
button
Volume –/Menu
button
Channel
/Menu /PLAY button
Channel
/Menu /STOP button
MENU button
INPUT SOURCE / OK button
POWER button
EJECT button
Volume +/Menu
button
Volume –/Menu
button
Channel
/Menu /PLAY button
Channel
/Menu /STOP button
MENU button
INPUT SOURCE / OK button
POWER button
SERVICE socket
6
54B0101A_English.indd 654B0101A_English.indd 6 2/27/2010 17:23:082/27/2010 17:23:08
Preparation
Supplied accessories
Operation Manual
Quick Setup Guide
Operation Manual Quick Setup Guide
AC cord (x1)
Product shape varies
in some countries
Remote control (×1)
AA battery (×2)
Stand unit and screws
26”
32”
19”
22”
Mount the TV stand
Before performing work spread cushioning over
the base area to lay the TV on, making sure the
area is completely flat.
This will prevent it from being damaged.
Before attaching (or detaching) stand, unplug the AC
cord from the AC INPUT terminal.
Confirm the 3 screws supplied with the TV.
1.
Screws (X3)
Remove the covering sheet before use.2.
1
Insert the stand into the openings on the
bottom of the TV.
2
Insert and tighten the 3 screws into the 3
holes on the bottom of the stand.
Soft cushion
Screw
19”
22”
Confirm the 8 screws supplied with the TV.1.
Short screws (X4)
(used in step 2)
Long screws (X4)
(used in step 3)
Remove the covering sheet before use.2.
Attach the base to the post.
2
Attach the base to the 4 screws into the 4
holes on the bottom of the base.
Hex key
Screw
3. Insert the stand into the openings on the
bottom of the TV.
2
Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
Hex key
Screw
Soft cushion
NOTE
For protection, sheets are covering the product. Please •
remove these sheets before use.
To detach the TV stand, perform the steps in reverse •
order.
19” 22”
26” 32”
7
54B0101A_English.indd 754B0101A_English.indd 7 2/27/2010 17:23:152/27/2010 17:23:15
Preparation
Wall mounting
W
H
TV
screen
size
( Inches)
VESA-
compatible
wall bracket
(millimeters)
(W x H)
Screw type
19”, 22” 100 x 100 mm Metric 4 x 10 mm
26” 200 x 100 mm Metric 4 x 10 mm
32” 200 x 200 mm Metric 6 x 10 mm
NOTE
At the time of purchasing wall bracket, please check if •
there is enough space between the wall bracket and TV
terminals for the terminal connection.
Installation of batteries
Insert two AA batteries into Remote control. 1.
Make sure (k) and (l) are facing the proper
direction.
Replace the cover.2.
NOTE
If the remote control will not to be used for a long •
time, remove the batteries to avoid remote control
damage.
CAUTION
Improper use of batteries can result in chemical
leakage or explosion. Be sure to follow the instructions
below.
Do not mix batteries of different types. Different •
types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and •
new batteries can shorten the life of new batteries or
cause chemical leakage in old batteries.
Remove batteries as soon as they have worn out. •
Chemicals that leak from batteries can cause a rash.
If you find any chemical leakage, wipe thoroughly
with a cloth.
The batteries supplied with this product may have a •
shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for •
an extended period of time, remove the batteries
from it.
Note on disposing batteries:
The batteries provided contain no harmful materials
such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate
that batteries may no longer be thrown out with the
household rubbish. Deposit any used batteries free of
charge into the designated collection containers set up
at commercial businesses.
Using the remote control
Use the remote control unit by pointing it towards the
remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
30° 30°
Remote control sensor
5m
Display the Menu Screen
Press TV MENU and the menu screen displays.
Select an item by the remote control
Press 1. / / to select the desired menu.
Press
2. / to select / adjust the item to the
desired level. The setting on screen is applied
immediately.
Press
3. RETURN to return to the previous layer.
Picture
Option
Lock
3
Picture Preference
Brightness
Contrast
Colour
Tint
Sharpness
Colour Temperature
Advanced Settings
DBC
Reset
Standard
On
50
85
50
0
0
Exit the Menu Screen
The operation will exit the menu screen if you press TV
MENU before it is complete.
8
54B0101A_English.indd 854B0101A_English.indd 8 2/27/2010 17:23:212/27/2010 17:23:21
Quick guide
Initial installation overview
Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
Preparation
Connect antenna cable to
the antenna terminal.
75Ω
If necessary, insert CA card
into the CI slot to watch
scrambled broadcasts.
Connect the AC cord to the
TV.
1
Power on and run the
auto installation
Turn on the TV power with
a.
Run the initial auto
installation.
✔ Language setting
Auto Installation
Language
English
Deutsch
Français
Italiano
Nederlands
Español
Ελληνιкά
Please select your language
then press “OK”
on your remote control:
✔ Country setting
Country
UK
Germany
France
Spain
Italy
Poland
Belgium
Auto Installation
Please select your country
then press “OK”
on your remote control:
✔ TV Location setting
TV Location
Home
Store
Auto Installation
Please select where the TV will be
placed.
The picture will be optimized for
that location.
2
✔ Start searching channels
Channel Scan
Scan
Auto Installation
TV will search for Digital CH,
please connect aerial(RF) lead.
Then press "OK".
If you skip this step,
it can be performed via MENU.
0%
Channel Scan
Scan
Auto Installation
TV will search for Analogue CH,
please connect aerial(RF) lead.
Then press "OK".
If you skip this step,
it can be performed via MENU.
100%
Channel Scan
Auto Installation
Please wait, channel search in
progress
Status : Scanning...
Analog Channels Found : 9
10%
Watch TV
Congratulations! Now you
can watch TV.
Complete
Auto Installation
Congratulations !!
Completed Initial Setup.
Please press [OK] to exit.
If necessary, adjust the
antenna to attain maximum
signal reception.
3
AC cord (x1)
Product shape
varies in some
countries.
9
54B0101A_English.indd 954B0101A_English.indd 9 2/27/2010 17:23:222/27/2010 17:23:22
Watching TV
Daily operation
Turning on/off the power
Press B on the TV.
Switch it off by pressing B on the TV.
Changing channels
With P<>:
Standby mode
E
To standby mode
If the TV set is switched on, you can switch it to
standby by pressing B on the remote control.
E
Switching on from standby
From standby, press B on the remote control.
TV indicator status
B indicator
Status
Off Power off
Green Power on
Red Standby
NOTE
If you are not going to use this TV for a long period of •
time, be sure to remove the AC cord from the power
outlet.
A small amount of electric power is still consumed even •
when B is turned off.
Selecting external video source
Once the connection is made, press b to display the
Input Select screen, and then press
/ to switch over
to the appropriate external source with OK.
Input Select
TV
AV1
AV2 (CVBS)
AV2 (S-Video)
Component
HDMI
DVD
PC
19” / 22”
Input Select
TV
AV1
AV2
AV3
Component
HDMI1
HDMI2
DVD
PC
26” / 32”
Operation without a remote control
This function is useful when there is no remote control
within your reach.
Press
1. MENU briefly to display the direct control
screen.
Press
2. P <> instead of / or i k/l
instead of
/ to select the item.
Press
3. b to confirm the selection.
NOTE
The direct control menu screen will disappear if left •
unattended for several seconds.
10
54B0101A_English.indd 1054B0101A_English.indd 10 2/27/2010 17:23:222/27/2010 17:23:22
Watching TV
EPG (Electronic Programme Guide)
EPG is an on-screen guide that displays scheduled
digital TV programmes. This guide is not available with
analogue channels. You can navigate, select and view
programmes.
There are two types of EPG, “Now and Next” and “7
or 8 day” EPG. “Now and Next” is always available
but the “7 or 8 day” EPG is only available in certain
countries.
With the EPG menu you can:
View a list of currently broadcast digital programmes.•
View upcoming programmes.•
Switch on EPG
NOTE
The first time you use EPG, you may be prompted •
to perform an update. If so, follow the on-screen
instructions.
Press 1. EPG on the remote control, the “Now
and Next” EPG will appear and the detailed
information about the current programme is
displayed.
Use the 2. colour buttons on the remote control
to activate available actions.
Date: Sun, 20 Aug
Television l TV guide
Prev page
1:00 ~ 1:01 No category
1:00
1:01
1:02
1:03
1:04
1:05
2:10
3:00
670
671
672
674
679
800
801
802
STU
MNO
VWXYZ
TCM
PQR
ARTE
DEF
SAT.1
Next page
Time: Sun, 20 Aug 01:00:52
679_VWXYZ_Monosco_0820_...
679_VWXYZ_Monosco_0820_...
679_VWXYZ_Monosco_0820_...
679_VWXYZ_Monosco_0820_...
679_VWXYZ_Monosco_0820_...
679_VWXYZ_Monosco_0820_...
679_VWXYZ_Monosco_0820_...
679_VWXYZ_Monosco_0820_...
Service
list
Events
list
Service list•
Prev page (Red):* List the previous service
list.
Next page (Green):* List the next service list.
Events list•
Prev day (Red):* List the previous day’s EPG.
Next day (Green):* List the next day’s EPG.
Info (Yellow):* Displays the information of
your highlighted programme.
Press 3. EPG or RETURN to exit .
11
54B0101A_English.indd 1154B0101A_English.indd 11 2/27/2010 17:23:232/27/2010 17:23:23
Watching TV
Teletext
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV
network, and decodes them into graphical format for
viewing. News, weather and sports information, stock
exchange prices and programme previews are among
the many services available.
Turning on and off Teletext
Select a TV channel or external source
1.
providing a Teletext programme.
Press
2. to display Teletext.
Many stations use the TOP operating system, •
while some use FLOF (e.g. CNN). Your TV
supports both these systems. The pages are
divided into topic groups and topics. After
switching on the teletext, up to 1000 pages are
stored for fast access.
If you select a programme with no Teletext •
signal, “No Teletext ” displays.
The same message displays during other •
modes if no Teletext signal is available.
Press 3. again to display the Teletext and
normal image at the same time on the screen.
NOTE
Teletext will not work if the selected signal type is RGB. •
Buttons for teletext operations
Buttons Description
P (rs)
Increase or decrease the page
number.
Colour
(R/G/Y/B)
Select a group or block of pages
displayed in the coloured brackets
at the bottom of the screen by
pressing the corresponding
Colour (R/G/Y/B) on the remote
control unit.
0 - 9
Directly select any page from 100
to 899 by using 0 - 9.
(TEXT)
Press this button to activate
Teletext with TV.
(SIZE)
Switch the Teletext image to Top,
Bottom or Full.
(HOLD)
Stop updating Teletext pages
automatically or release the hold
mode.
(REVEAL)
Reveal or hide hidden information
such as an answer to a quiz.
Buttons Description
(SUBPAGE)
Select the subpage when the
current page contains subpage(s).
Press number buttons on the
remote control to access the
subpage directly. (four digits)
Select a Teletext language
Press 1. TV MENU on the remote control and
select
≥ Teletext.
Press
2. OK or to enter Teletext menu and
press
/ to select one of the following.
Digital Teletext Language.•
Analog Teletext Language.•
Highlight your selection and press 3. / to
make a selection.
Follow the on-screen instructions to exit.
4.
Using the MHEG5 application (UK only)
Some services bring you programmes with the MHEG
(Multimedia and Hypermedia Expert Group) application
encoded, letting you experience DTV interactively.
When provided, the MHEG5 application will start when
you press
(TELETEXT) or the Red button.
Sample MHEG5 screen
12
54B0101A_English.indd 1254B0101A_English.indd 12 2/27/2010 17:23:242/27/2010 17:23:24
Ver Position: * To adjust the vertical placing of
the image.
Phase: * Eliminates the horizontal (PHASE)
interfering lines.
Clock:* Eliminates the vertical (CLOCK)
interfering lines.
Reset:• Select “Reset” to reset Picture
Preference, Brightness, Contrast, Colour, Tint,
Sharpness, Colour Temperature and Back Light
to the factory preset values.
Press 4. / to select / adjust the item to the
desired level.
Follow the on-screen instructions to exit.
5.
NOTE
When the DBC function is ON, the backlight cannot be •
adjusted.
Use smart picture
Apart from manually adjusting picture settings, you can
use Picture Preference to set your TV to a predefined
picture setting.
Press
1. TV MENU on the remote control and
select
.
Press
2. OK or to enter and select Picture
Preference.
Press
3. / to select one of the following
settings:
• Sport
• Standard
Movie•
Memory•
Follow the on-screen instructions to exit.4.
HDMI overscan
When you watch TV via HDMI input source, you could
use this function to enlarge the picture. It may have few
loss of video content.
Press
1. TV MENU on the remote control and
select
≥ Advanced Settings ≥ HDMI
Mode.
Press
2. / to select Auto, PC or Video.
Follow the on-screen instructions to exit.
3.
Picture
Adjust picture settings
Press 1. TV MENU on the remote control and
select
.
Press
2. OK or to enter the list.
Picture
Option
Lock
Picture Preference
Brightness
Contrast
Colour
Tint
Sharpness
Colour Temperature
Advanced Settings
DBC
Reset
Standard
On
50
85
50
0
0
Press 3. / to select one of the following
settings:
• Picture Preference: See right colum.
Brightness: • Changes the level of light in the
picture.
Contrast: • Changes the level of bright parts in
the picture keeping the dark parts unchanged.
• Colour: Changes the level of saturation.
Tint: • Changes the colours to reddish or bluish.
Sharpness: • Changes the level of sharpness of
fine details.
Colour Temperature:• Press OK
or to enter
and press
/ to select one of the following
item: Sets the colour temperature to Cool
(bluer), Medium (balanced), Warm (redder),
Memory (R Gain / G Gain / B Gain).
Advanced Settings: • Press OK
or to enter
and press
/ to select one of the following
item:
DNR:* Filters and reduces the noise in the
picture. Selects the level to Low / Medium /
High. Or select Off to disable this function.
Blue Back: * Auto blue screen and mute the
sound if the signal is weak or absent.
Back Light:* Adjusts the background brighter
or darker.
HDMI Mode: * See right colum.
DBC: • Change the Black level automatically
acording to the brightness an image.
PC: • Press OK
or to enter and press / to
select one of the following item:
Auto Adjust: * Hor Position, Ver Position,
Phase and Clock are adjusted automatically
as per the input PC video signal.
When PC-input mode was selected and a
PC-signal was input, Auto Adjust will be
performed automatically.
Hor Position: * To adjust the horizontal placing
of the image.
TV menu
13
54B0101A_English.indd 1354B0101A_English.indd 13 2/27/2010 17:23:252/27/2010 17:23:25
Audio
Adjust Audio settings
This section describes how to adjust sound settings.
Press
1. TV MENU on the remote control and
select
.
Press
2. OK or to enter the list.
Picture
Option
Lock
Balance
Bass
Treble
Surround
Equalizer
Speaker
Audio Description Setting
Reset
Off
Off
On
0
50
50
Press 3. / to select one of the following
settings:
Balance: • Sets the balance of the left and right
speakers to best fit your listening position.
Bass: • Adjusts the amount of bass.
Treble: • Adjusts the amount of treble.
Surround: • Automatically switches the TV to
the best surround sound mode available from a
broadcast. Select On or Off.
Equalizer: • Change the characteristic of audio
frequency. Select the Off, Rock, Pop, Live,
Dance, Techno, Classic or Soft.
Speaker (•
26” 32”
): You can set the audio
output from speaker to “On” or “Off”.
Audio Description Setting: • You can set the
output audio of Visual Impaired Audio. This
option is available, when the Audio Description
setting is “On” only. Press OK or
to enter the
following options.
Audio Description: * You can set the Visual
Impaired Audio. Visual Impaired Audio is
verbal narration inserted to explain detailed
scene in parallel with normal audio for people
with visual impairment.
Volume: * You can adjust the audio volume of
Visual Impaired audio.
Reset:• Select “Reset” to reset Balance, Bass,
Treble to the factory preset values.
Press 4. / to select / adjust the item to the
desired level.
Follow the on-screen instructions to exit.
5.
TV menu
TV
The first time you set up your TV, you are prompted to
select an appropriate menu language and to perform
automatic installation of TV and digital radio channels
(If available).
This chapter provides instructions on how to reinstall
channels as well as other useful channel installation
features.
NOTE
Re-installing channels modifies the channel list.•
Select a digital audio language
Press 1. TV MENU on the remote control and
select
.
Press
2. OK or to enter TV menu.
Press
3. / to select Audio Language or
Audio Language 2nd.
Highlight your selection and press
4. / to
select an audio language.
Follow the on-screen instructions to exit.
5.
NOTE
If your selected audio language is not broadcasted, the •
default audio language will be displayed.
Automatically install channels
This section describes how to search and store
channels automatically. Instructions are for both digital
and analogue channels.
E
Step 1: Select your menu language
Press
1. TV MENU on your remote control and
select
≥ OSD Language.
Press
2. / to select your language.
Follow the on-screen instructions to exit.
3.
14
54B0101A_English.indd 1454B0101A_English.indd 14 3/2/2010 18:51:463/2/2010 18:51:46
TV menu
E
Step 2: Select your country
Select the country where you are located. The TV
installs and arranges channels according to your
country.
Press
1. TV MENU on the remote control and
select
≥ Country.
Press
2. / or to select your country.
Follow the on-screen instructions to exit.
3.
E
Step 3: Automatic installation
Your TV searches and stores all available digital and
analogue TV channels as well as all available digital
radio channels.
Press
1. TV MENU on the remote control and
select
≥ Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter •
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Select 2. Auto Scan ≥ Start and press OK or
to start channel installation. The installation
may take a few minutes.
When complete, follow the on-screen
3.
instructions to exit.
Update Scan
Update Scan has similar function with Auto Scan.
The difference is you could update channel list without
erasing the original information.
Press
1. TV MENU on the remote control and
select
≥ Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter •
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Update Scan ≥ Start
and press OK or
to start channel update.
When complete, follow the on-screen
3.
instructions to exit.
Single RF Scan
If using digital broadcasts, you can check the quality
and signal strength of digital channels. This allows you
to reposition and test your antenna or satellite dish.
Press
1. TV MENU on the remote control and
select
≥ Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter •
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Signal Status and press
OK or
to enter.
Picture
Option
Lock
Signal Strength
Signal Quality
Good
100
When the scan is completed, the result of 3.
Signal Strength and Signal Quality appear on
the screen.
Follow the on-screen instructions to exit.
4.
NOTE
If the signal quality and strength is poor, reposition •
the antenna or satellite dish and retest.
If you have further problems with the reception of •
your digital broadcast, contact a specialised installer.
Channel Skip
Channel skip allows you to skip one or more channels
when pressing P <> on the remote control to switch
between channels.
Press
1. TV MENU on the remote control and
select
≥ Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter •
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Channel Skip and press
OK or
to enter the channel list.
Press
3. / to select one or more channels you
preferred to skip.
Press
4. OK to mark or cancel.
Follow the on-screen instructions to exit.
5.
NOTE
To watch the skipped channels, enter the channel •
numbers by using the digit buttons on the remote
control or select from channel list.
If you perform Auto Scan, your stored settings will be •
erased and you will have to perform this operation again.
15
54B0101A_English.indd 1554B0101A_English.indd 15 2/27/2010 17:23:262/27/2010 17:23:26
TV menu
Channel Sort
Channel sort allows you to reorder the channels in the
channel list.
Press
1. TV MENU on the remote control and
select
≥ Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter •
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Channel Sort and press
OK or
to enter the channel list.
Press
3. / to select one channel and press
OK to mark.
Press
4. / to select another channel and press
OK to mark. The two channels your marked are
exchanged.
Repeat step 3 to 4 to reorder more channels.
5.
Follow the on-screen instructions to exit.6.
NOTE
If you perform Auto Scan, your stored settings will be •
erased and you will have to perform this operation again.
Channel Edit
Channel edit allows you to change the channel number
or the channel name.
Press
1. TV MENU on the remote control and
select
≥ Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter •
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Channel Edit and press
OK or
to enter the channel list.
Press
3. / to select one channel you prefer
to edit.
Press
4. OK to enter.
Picture
Option
Lock
Network Name:
Channel Number:
Channel Name :
Frequency
Colour system
Sound system
CESKE RADIOKOMU...
805
NOVA
498
Auto
B/G
Press 5. / to highlight one of the following:
Channel Number:• Enter a new channel
number by using the digit buttons on the
remote control.
Channel Name:• Press the digit buttons on
the remote control to rename the channel.
Please refer to the graphic below for available
characters. (Press each button repeatedly to
change between characters.)
0-9 digit buttons with available characters
(
button works as "Back space".)
Remote key Action
0 +, –, ., 0
1 ABC1
2 DEF2
3 GHI3
4 JKL4
5 MNO5
6 PQR6
7 STU7
8 VWX8
9 YZ9
Back space
Frequency:• Enter the frequency value by using
the digit buttons on the remote control. (Only
for analogue channels)
Colour system:• Press
/ to select the
colour system. (Only for analogue channels)
Sound system: • Press
/ to select the
sound system. (Only for analogue channels)
Follow the on-screen instructions to exit.6.
NOTE
The new channel number you have entered can not •
override the exist one.
If you perform Auto Scan, your stored settings will be •
erased and you will have to perform this operation again.
16
54B0101A_English.indd 1654B0101A_English.indd 16 2/27/2010 17:23:272/27/2010 17:23:27
TV menu
illustration 1:
Letterbox image is increased
WSS:
Public broadcasters include 16:9 identification,
the WSS signal (WideScreenSignalling), during
transmission in order to ensure automatic conversion
to 16:9.
Other formats
Press ∏ until the desired size is reached.
4:3
The picture is displayed in 4:3 format with black bars to
the right and left.
16:9
The width of the picture will be zoomed evenly.
14:9
The picture is increased somewhat but not up to the
full screen width. Black bars remain on the right and left
and also at the top and bottom.
Cinema
Use Cinema to increase a small 4:3 letterbox signal.
If the picture is surrounded by a black border as in the
illustration, this is a 4:3 letterbox signal.
Cinema increases this picture that is too small as far
as possible.
Real (HDMI / PC mode)
The picture is displayed with original size.
NOTE
In PC mode, the picture size feature is available only for •
16:9-, 4:3- or Real format.
For PC input signal over WXGA, Real format is not •
availabe and adjusted to 16:9 format.
External receivers can automatically adjust the picture •
size via a SCART cable. Please read the instructions for
the external receiver.
Analogue Ch Fine Tune
You can manually fine tune analogue channels when
reception is poor.
Press
1. TV MENU on the remote control and
select
≥ Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter •
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Fine and press OK or
to enter the analogue channel list.
Press
3. / to select one channel and press
OK to enter.
Press
4. / to adjust the frequency.
When complete, press
5. OK to set the frequency.
The fine tuned channel is stored under the
current channel number.
Follow the on-screen instructions to exit.
6.
NOTE
This option is unavailable if no analogue channels were •
found.
Features
Change picture format
Change the picture format to suit your content.
Press
1. ∏ repeatedly to select one of the
following picture formats.
Auto
The picture is automatically only then shown in a
format-filling display when a WSS-TV signal is received.
Example:
If the analogue tuner receives a letterbox image with
WSS signal then the resulting image looks like this:
17
54B0101A_English.indd 1754B0101A_English.indd 17 2/27/2010 17:23:282/27/2010 17:23:28
Automatically switch the TV on or off (On /Off time)
On / Off time switches the TV to power on or standby
at a specified time.
NOTE
Before using off time function, you have to set the time •
on your TV correctly.
Press 1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Press
3. / to select Time and press OK or
to enter.
Press
4. to select Timer and press / to
select:
Both On / Power On Timer / Power Off •
Timer: Press
to highlight the Power On
Timer or Power Off Timer box and set power
on or off time by using the digit buttons on
your remote control.
Off: • Disable Timer.
Follow the on-screen instructions to exit.5.
Automatically switch the TV to standby (Sleep timer)
Sleep timer switches the TV to standby after a defined
period of time.
Press
1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Press
3. / to select Sleep Timer.
Press
4. / to select the period of time before
TV enters to standby.
Follow the on-screen instructions to exit.
5.
No Operation Power Off
When the Set and Remote key operation are not
operated with specified period by this setting (1/2/4
Hours), the power status is changed to stand by mode
automatically.
Press
1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Press
3. / to select No Operation Power Off.
Press
4. / to select the period of time before
TV enters to standby.
Follow the on-screen instructions to exit.
5.
TV menu
Power Management
Press 1. TV MENU on the remote control and
Select
≥ Power Management.
Press
2. / to select:
On: If a period of time is elapsed with no video
signal in PC mode, the power status is changed
to stand by mode automatically. When there is
available video signal again, the power status is
returned to power on mode automatically.
Off: Disable Power Management.
Change the time zone
Press 1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Select
3. Time Zone and press / to select
your time zone.
Follow the on-screen instructions to exit.
4.
Set the clock
Press 1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Press
3. / to select Time and press OK or
to enter.
Auto Synch
ronization
Date
Time
On
2009/10/21
01:01:39
Timer
Power On Timer
Power Off Timer
Of
f
00:00:00
00:00:00
Select 4. Auto Synchronization and press /
to select:
On:• Sets the clock automatically the same with
the digital signal time. (Only if digital signal is
available).
Off:• Press
/ to set your system Date
or system Time manually by using the digit
buttons on your remote control.
When the clock setting is completed, follow the 5.
on-screen instructions to exit.
18
54B0101A_English.indd 1854B0101A_English.indd 18 2/27/2010 17:23:282/27/2010 17:23:28
TV menu
AV Input (Only shown in AV mode)
It is possible to manually adjust various settings for
connections with external devices. Select the
appropriate signal type for the signals from the video
equipment connected the AV1 or AV2 (
26” 32”
).
Press
1. TV MENU on your remote control and
select
.
Press
2. / to select AV1 Input or AV2 Input.
Press
3. / to select the desired signal type.
Auto:
Factory setting, normally OK.
RGB (only for AV1 input):
When RGB is input.
CVBS:
When Composite is input.
S-Video:
When S-Video is input.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcasted via teletext or DVB-T digital
broadcasts. With digital broadcasts, you have the
additional option of selecting a preferred subtitle
language.
E
Set analogue subtitles
Press
1. TV MENU on the remote control and
select
≥ Subtitle.
Press
2. OK or to enter Subtitle.
Select
3. Analog Subtitle.
Press
4. / to select On to display subtitle
always. Select Off to close subtitles.
Follow the on-screen instructions to exit.
5.
E
Select a subtitle language on digital TV
channels
When you select a subtitle language on a digital TV
channel as described below, the preferred subtitle
language set in the TV menu is temporarily overruled.
Press
1. TV MENU on the remote control and
select
≥ Subtitle.
Press
2. OK or to enter Subtitle.
Press
3. / to select Digital Subtitle Language
or Digital Subtitle Language 2nd.
Highlight your selection and press
4. / to
select a subtitle language.
Follow the on-screen instructions to exit.
5.
NOTE
If your selected subtitle language is not broadcasted, the •
default language subtitle will be displayed.
If the • Digital Subtitle Language you selected is not
available, the Digital Subtitle Language 2nd will be
displayed.
E
Select Hearing impaired subtitle
When watching channels with hearing impaired
services, you can enable the subtitle commentary for
hearing impaired. For digital channels only.
Press
1. TV MENU on the remote control and
select
≥ Subtitle.
Press
2. OK or to enter Subtitle.
Press
3. / to select Hearing Impaired.
Press
4. / to select On or Off as your subtitle
type.
Follow the on-screen instructions to exit.
5.
Auto 4 : 3 Mode
This option selects the default way that a 4:3 signal
is shown - either as normal “4:3” or expanded in the
“16:9” mode, according to your preferences.
Press
1. TV MENU on the remote control and
select
≥ 4 : 3 Mode.
Press
2. / to select 4 : 3 or 16 : 9.
Follow the on-screen instructions to exit.
3.
Reset Default
When you activate the Reset Default, the TV enters to
first time installation.
Press
1. TV MENU on the remote control and
select
≥ Reset TV Setting.
Press
2. OK or to enter.
Input password (0000: default password).
3.
Follow the on-screen instructions to reset your 4.
TV settings.
19
54B0101A_English.indd 1954B0101A_English.indd 19 2/27/2010 17:23:292/27/2010 17:23:29
Parental
Lock TV channels with a four digit code to prevent
children from watching unauthorized content.
Access Parental menu
Press 1. TV MENU on the remote control and
select
.
Press
2. OK or to highlight the password box.
Picture
Option
Lock
Password
* * * *
Enter your password by using the 3. digit buttons
on the remote control. If your password is
correct, the Parental menu appears.
NOTE
You have to enter a 4-digit password everytime to •
access Parental menu.
Enter “0000” as the default password.•
If you forget your password, enter “3001” to override •
any existing passwords.
Lock one or more channels
Enter your password to access the 1. Parental
menu. (See “Access Parental menu” on this
page)
Select
2. Channel Block and press OK or to
enter the channel list.
Press
3. / to select one or more channels you
preferred to lock.
Press
4. OK to lock or unlock the channel you
selected.
Follow the on-screen instructions to exit.
5.
NOTE
If you switch to the locked channel, you will be •
prompted to enter your password. (If your password is
correct, the locked channel will be unlocked before the
TV restarts from standby.)
TV menu
To set parental ratings
Some digital broadcasters rate their programmes
according to age. You can set TV to display only
programmes with age ratings higher than your child’s.
Enter your password to access the
1. Parental
menu. (See “Access Parental menu” on this
page)
Press
2. / to select Program Block and press
OK or
to enter.
Press
3. / to select an Age Rating.
Follow the on-screen instructions to exit.
4.
NOTE
If you switch to the locked channel, you will be •
prompted to enter your password. (If your password is
correct, the locked input source will be unlocked before
the TV restarts from standby.)
Set / Change password
Enter your password to access the 1. Parental
menu. (See “Access Parental menu” on this
page)
Press
2. / to select Change Password and
press OK or
to enter.
Enter your new password in the
3. New
Password box by using the digit buttons on
the remote control.
Enter your new password again in the
4. Confirm
Password box.
When complete, the TV reruns to the
5. Parental
menu.
Follow the on-screen instructions to exit.
6.
20
54B0101A_English.indd 2054B0101A_English.indd 20 2/27/2010 17:23:292/27/2010 17:23:29
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Sharp LC19DV200E Operating instructions

Sharp
Brand
Sharp
Model
LC19DV200E
Category
Blu-Ray players
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents