Silvercrest SBLV 20 A1 Operating Instructions And Safety Instructions

Brand: Silvercrest

Model: SBLV 20 A1

Category: Portable speakers

Type: Operating Instructions And Safety Instructions

Page is loading ...

GB / IE Operating instructions and safety instructions Page 1

DE / AT / CH Bedienungsanleitung und Sicherheitshinweise Seite 17

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

IAN 273789

BLUETOOTH

-STEREO-VINTAGE-LAUTSPRECHER

SBLV 20 A1

BLUETOOTH

-STEREO-VINTAGE-

LAUTSPRECHER

Bedienungsanleitung und Sicherheitshinweise

BLUETOOTH

STEREO VINTAGE

SPEAKER

Operation and Safety Notes

SBLV 20 A1

│

1 ■

Contents

Introduction ...................................................2

Information concerning these operating instructions .............................. 2

Notes on trademarks ...................................................... 2

Intended use ............................................................ 2

Warnings used ........................................................... 3

Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Basic safety guidelines ..................................................... 3

Notes on batteries and rechargeable batteries .................................. 5

Power saving mode ....................................................... 5

Description of components .......................................6

Operation ....................................................6

Unpacking .............................................................. 6

Check the package contents ................................................ 6

Disposal of packaging materials ............................................. 7

Set-up location requirements ................................................ 7

Connecting the power supply ............................................... 7

Charging the internal battery ................................................ 8

Handling and operation .........................................8

Switch the device on/oﬀ ................................................... 8

Setting the volume, treble and bass ........................................... 9

Bluetooth

operation .................................................... 9

Connect a playback device via AUX IN ...................................... 10

Troubleshooting ..............................................11

Cleaning .....................................................12

Storage when not in use .......................................12

Disposal .....................................................13

Disposal of the device ....................................................13

Appendix ....................................................13

Technical data ..........................................................13

Notes on the EU Declaration of Conformity ...................................14

Warranty .............................................................. 14

Service ................................................................14

Importer ............................................................... 15

SBLV 20 A1■ 2

│

Introduction

Information concerning these operating instructions

Congratulations on the purchase of your new device.

You have selected a high-quality product. The operating instructions are part of

this product. They contain important information on safety, usage and disposal.

Before using the product, familiarise yourself with all operating and safety instruc-

tions. Use the product only as described and for the speciﬁed areas of application.

Keep these operating instructions as a reference and store them near the product.

Please also pass on these operating instructions to any future owner.

This documentation is protected by copyright.

Any copying or reproduction, including in the form of extracts, or any repro-

duction of images (even in a modiﬁed state), is permitted only with the written

authorisation of the manufacturer.

Notes on trademarks

The Bluetooth

word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc.

All other names and products may be trademarks or registered trademarks of

their respective owners.

Intended use

This consumer electronics device is used to play back audio ﬁles which can be

transferred via Bluetooth

or 3.5 mm jack cable. Due to the built-in battery,

the device is also suitable for mobile playback. The device is intended for private

use only and is not suitable for commercial purposes. The device is not intended

for any other purpose, nor for use beyond the scope described. The device is not

intended for use in commercial or industrial environments. The manufacturer ac-

cepts no responsibility for damage caused by failure to observe these instructions,

improper use or repairs, unauthorised modiﬁcations or the use of unapproved

replacement parts. The risk shall be borne solely by the user.

SBLV 20 A1

│

3 ■

Warnings used

The following warning notice types are used in these operating instructions:

DANGER

A warning notice at this hazard level indicates a potentially

hazardous situation.

Failure to avoid this hazardous situation could result in severe injuries or even

death.

► Follow the instructions in this warning notice to avoid the risk of death or

serious injury.

CAUTION

A warning notice at this hazard level indicates a potential for

property damage.

Failure to avoid this situation could result in property damage.

► Follow the instructions in this warning notice to prevent property damage.

NOTE

►

A note provides additional information that will assist you in using the device.

Safety

This section contains important safety instructions for using the product. This

product complies with statutory safety regulations. Improper use may result in

personal injury and property damage.

Basic safety guidelines

To ensure safe operation of the product, follow the safety guidelines set out

below:

■ This device may be used by children aged 8 years and above and by persons

with limited physical, sensory or mental capabilities, or lack of experience and

knowledge, provided that they are under supervision or have been told how to

use the device safely and are aware of the potential risks. Children must not use

the device as a plaything. Cleaning and user maintenance tasks may not be

carried out by children unless they are supervised.

■

DANGER! Do not allow children to play with the packaging material!

Keep all packaging materials away from children.

Risk of suﬀocation!

■ Check the device for visible external damage before use. Do not operate a

device that has been damaged or dropped.

SBLV 20 A1■ 4

│

■ If the power cable or connections are damaged, have them replaced by an

authorised specialist or the Customer Service department.

■ Protect the power cable from hot surfaces and sharp edges.

■ Ensure that the power cable is not taut or kinked.

■ Do not leave the power cable hanging over edges (tripping hazard).

■ Always place the device on a stable and level surface. It can be damaged if

dropped.

■ Do not expose the device to direct sunlight or high temperatures. Otherwise it

may overheat and be irreparably damaged.

■ Be sure to provide suﬃcient air circulation to avoid a heat build-up. Never cover

the device! Risk of ﬁre!

■ Do not place the device near heat sources such as radiators or other heat-generating

appliances.

■ Never operate the device in the vicinity of naked ﬂames (e.g. candles), and do

not place burning candles on or next to the device. This will help to prevent ﬁres.

■ The device is not designed for use in rooms with high temperatures or humidity

(e.g. bathrooms) or where there is excessive dust.

■ Do not expose the device to water spray or dripping water, and do not place

liquid-ﬁlled objects such as vases or open drink containers on or near the device.

■ The speaker may warm up during charging. Place the speaker in a well-ventilated

location during the charging process and do not cover it.

■

DANGER! Never open the housing of the device. There are no user-serviceable

or replaceable components inside the device. Risk of electrical shock!

■ Do not make any unauthorised modiﬁcations or alterations to the device.

■ All repairs must be carried out by authorised specialist companies or by the

Customer Service department. Improper repairs may put the user at risk. It will

also invalidate any warranty claims.

■ Repairs to the device during the warranty period may only be carried out by

a customer service department authorised by the manufacturer. Otherwise, no

warranty claims will be held for any subsequent damages.

■ Defective components must always be replaced with original replacement parts.

Compliance with the safety requirements can only be guaranteed by using these

replacement parts.

■ Switch oﬀ the device immediately and pull the plug out of the power socket if

you smell fumes or notice any smoke. Have the device checked by a qualiﬁed

specialist before using it again.

■ The device consumes power in standby mode. To completely separate the device

from the power supply, the plug must be disconnected from the mains power

socket. The power socket must be easily accessible so that the mains adapter can

be easily disconnected in an emergency.

■ In the case of a malfunction occurring or a thunderstorm, disconnect the plug

from the mains power socket.

SBLV 20 A1

│

5 ■

Notes on batteries and rechargeable batteries

DANGER

Mishandling batteries can cause ﬁres, explosions, leakages or

other hazards!

► Keep batteries out of the hands of children.

► Do not leave batteries lying around. There is a risk of them being swal-

lowed by children or pets. If this happens, consult a doctor immediately!

► Batteries must never be short-circuited, taken apart, deformed or thrown

into a ﬁre. There is a risk of explosion!

► Leaking or damaged batteries can cause skin irritations when touched.

Therefore, use suitable protective gloves. In the event of contact with the

skin, rinse with plenty of water. If the chemicals come into contact with

your eyes, rinse thoroughly with water, do not rub and consult a doctor

immediately.

► Do attempt to recharge non-rechargeable batteries. There is a risk of ﬁre

and/or explosion!

Power saving mode

If there is no input signal to the 3.5 mm jack AUX IN or no playback in

Bluetooth

operation, the device switches automatically into power-saving

mode after 15 minutes.

The status LED

and the operating LED go out and any existing Bluetooth

connection will be disconnected.

To exit power-saving mode, switch the device oﬀ and on again using the toggle

switch

SBLV 20 A1■ 6

│

Description of components

(See fold-out page for illustrations)

Speaker

Main switch ON/OFF (rear of the device)

AC∼ connection socket (rear of the device)

TREBLE control

VOLUME control

BASS control

Toggle switch /ON

Status LED

3.5 mm jack AUX IN

Operating LED (Bluetooth

and AUX mode)

/AUX button

button (jump to next track)

button (start/pause playback)

button (jump to previous track)

Power cable

Operating instructions

Operation

Unpacking

♦ Remove all parts and the operating instructions from the box.

♦ Remove all packaging material.

Check the package contents

(See fold-out page for illustrations)

The product includes the following components:

▯ Bluetooth

Stereo Vintage Speaker SBLV 20 A1

▯ Power cable

▯ These operating instructions

SBLV 20 A1

│

7 ■

NOTE

►

Check the package for completeness and for signs of visible damage.

► If the delivery is incomplete or damage has occurred as a result of defec-

tive packaging or during transport, contact the Service hotline (see section

Service).

Disposal of packaging materials

The packaging protects the device from damage during transport. The packaging

materials have been selected for their environmental friendliness and ease of

disposal, and are therefore recyclable.

Returning the packaging into the material cycle conserves raw materials and

reduces the amount of waste generated. Dispose of packaging materials that

are no longer needed in accordance with applicable local regulations.

NOTE

► If possible, keep the device's original packaging during the warranty period

so that the device can be packed properly for return shipment in the event

of a warranty claim.

Set-up location requirements

For safe and trouble-free operation of the device, the set-up location must fulﬁl

the following requirements:

■ Place the device on a ﬁrm, ﬂat and level surface.

■ Do not operate the device in a hot, wet, extremely damp or explosive environment.

■ Keep a minimum distance of 30 cm to heat-emitting appliances such as heaters,

ovens, etc.

■ Operate the device only in locations with adequate ventilation.

■ The surfaces of some items of furniture might contain components that can corrode

and soften the rubber feet of the device. If necessary, place a mat under the

device’s rubber feet.

■ The mains power socket must be easily accessible so that the power cable can

be easily disconnected in an emergency.

Connecting the power supply

■ Before connecting the device, compare the connection data (voltage and

frequency) on the rating plate with that of your mains power supply. This

data must agree so that the device is not damaged.

■ Plug one end of the power cable

into the AC

socket on the rear of

the device and the mains plug into a mains socket.

SBLV 20 A1■ 8

│

Charging the internal battery

The speaker is equipped with a built-in lithium-ion battery and can be oper-

ated with the power cable

or with the integrated lithium-ion battery. Before

ﬁrst use, the battery must be fully charged.

■ Move the main switch

on the rear of the device to the ON position.

The status LED

lights up blue/purple and the battery charges.

■ As soon as the status LED

lights up blue, the integrated battery is fully

charged.

NOTE

► The charging time is approximately 6 hours and allows up to 4 hours of

music playback at medium volume.

Handling and operation

This section provides you with important information on handling and using the

device.

Switch the device on/oﬀ

Mains power operation

♦ Move the main switch on the rear of the device to the ON position.

The status LED

lights up blue.

♦ To switch the device on, place the toggle switch

into the ON position.

The operating LED

ﬂashes blue.

♦ Move the toggle switch

into the position to switch the device into standby

mode.

♦ To switch to battery operation, move the main switch

on the rear of the device

into the OFF position.

Battery operation

♦ To switch the device on, place the toggle switch into the ON position.

The status LED

lights up orange and the operating LED also ﬂashes blue.

♦ Move the toggle switch

into the position to switch the device into standby

mode.

SBLV 20 A1

│

9 ■

Setting the volume, treble and bass

Use the VOLUME control to set the volume.

♦ Turn the VOLUME control

in a clockwise direction to increase the volume.

♦ Turn the VOLUME control

anticlockwise to decrease the volume.

Use the TREBLE control

to adjust the treble tones. In the centre position (0),

the knob has no audible eﬀect on music playback.

♦ Turn the TREBLE control

in a clockwise direction to increase the treble tones.

♦ Turn the TREBLE control

anticlockwise to decrease the treble tones.

Use the BASS control

to adjust the bass tones. In the centre position (0), the

knob has no audible eﬀect on music playback.

♦ Turn the BASS control

in a clockwise direction to increase the bass tones.

♦ Turn the BASS control

anticlockwise to decrease the bass tones.

Bluetooth

operation

To play audio ﬁles via Bluetooth

, the speaker must previously have been

paired with a compatible Bluetooth

playback device.

♦ Move the toggle switch

to the ON position. By default, Bluetooth

operation

is activated when you turn on the device and the operating LED

ﬂashes blue.

The speaker is now in pairing mode for about 15 minutes. If no connection is

made during this time, the device switches into standby mode (see also section

Power saving mode).

♦ Set up the Bluetooth

playback device so that it searches for other Bluetooth

devices. A detailed description of how to do this can be found in the operating

instructions for your Bluetooth

playback device.

♦ Select SBLV 20 A1 from the list of found devices in your Bluetooth

playback

device to pair the two devices. If pairing is successful, you will hear a conﬁrm-

ation melody and the operating LED

lights up permanently blue.

♦ Start playback on the Bluetooth

playback device. You can either control

the music playback on the Bluetooth

playback device or by using the ,

and buttons on the speaker.

SBLV 20 A1■ 10

│

♦ To end the Bluetooth

connection, either deactivate the Bluetooth

function

on the playback device or switch the Bluetooth

operation on the speaker

oﬀ by pressing the

/AUX button and switching to AUX mode. When you

switch to AUX mode, the operating LED

lights up orange.

NOTE

►

The next time you turn on the device it will automatically connect to the last

Bluetooth

playback device connected. If your Bluetooth

playback

device does not automatically reconnect to the device, you will have to re-

establish the connection to your Bluetooth

playback device manually.

A detailed description of how to do this can be found in the operating

instructions for your Bluetooth

playback device.

► If you use a smartphone as your Bluetooth

playback device, the audio

playback will be paused when there is an incoming call. Acceptance/

termination of the call is carried out via the smartphone. After ﬁnishing the

call, the playback will be automatically continued.

► Note that while in Bluetooth

mode, you can also set the volume via the

Bluetooth

playback device.

► If the playback sounds distorted, reduce the volume on the Bluetooth

playback device.

Connect a playback device via AUX IN

You can connect a wide variety of playback devices to this device, for example

MP3 or CD players. Please refer to the operating instructions of the respective

device. To connect external playback devices, you will need an audio cable (not

included). One end of the cable must have a 3.5 mm jack plug to connect to

the 3.5 mm jack socket

. The type of plug on the other end of the cable will

depend on the audio output of the external device.

CAUTION

► Switch oﬀ all devices before connecting them with each other and follow

the operating instructions of the devices you want to connect.

♦ Connect the line-out connector of the external playback device (e.g. headphone

socket) via a 3.5mm jack cable to the 3.5 mm AUX IN jack socket

on the

rear of the device.

♦ Move the toggle switch

to the ON position. By default, Bluetooth

oper-

ation is activated when you turn on the device and the operating LED

ﬂashes

blue.

♦ Press the

/AUX button to switch to AUX mode. The operating LED lights

up orange.

♦ Switch on the connected playback device and start playback.

♦ Turn oﬀ both devices before you disconnect them from each other.

SBLV 20 A1

│

11 ■

NOTE

►

Note that while in AUX mode, you can also set the volume via the external

playback device.

► If the playback sounds distorted, reduce the volume on the external play-

back device.

Troubleshooting

The following table will help you to identify and rectify minor malfunctions:

Faults Possible cause Remedy

Device does not

switch on.

The power cable

is not con-

nected.

Connect the power cable

the AC

connection socket

The socket is not supplying any

power.

Check the house mains fuse.

The integrated battery is empty. Charge the integrated battery.

No sound.

The volume on the device or the

playback device is set to minimum.

Increase the volume on the device

or on the playback device.

Playback has not been started on

the playback device.

Start playback on the playback

device.

The Bluetooth

connection

cannot be

established.

Possibly, not all of the Bluetooth

devices are compatible.

Check the settings on your

Bluetooth

device.

Bluetooth

transmission is

not activated on your playback

device.

Activate Bluetooth

transmis-

sion on your playback device.

Please refer to its operating

instructions for more information.

The playback device is not paired

with the device.

Repeat the pairing process (see

section Bluetooth

mode).

The distance between the device

and the playback device is too

great.

Ensure that the device is no more

than 10 metres away from the

playback device.

Point the remote control towards

the front of the device.

Playback sounds

distorted in AUX

mode.

The volume is set too high on the

external playback device.

Reduce the volume on the external

playback device.

NOTE

► If the above-mentioned solutions do not resolve the problem, please contact

Customer Service (see section Service).

SBLV 20 A1■ 12

│

Cleaning

DANGER

Risk of fatal injury from electrocution!

► Remove the plug from the mains power socket before starting to clean the

device.

CAUTION

Possible damage to the device.

► To avoid irreparable damage to the device, ensure that no moisture can

penetrate the device during cleaning.

► Do not use caustic, abrasive or solvent-based cleaning materials. These can

damage the surfaces of the device.

♦ Clean the surfaces of the device with a soft, dry cloth. For stubborn dirt, use a

slightly damp cloth with a mild detergent.

Storage when not in use

♦ If you decide not to use the device for a long period, disconnect it from the mains

power supply and store it in a clean, dry place away from direct sunlight.

♦ To ensure a long battery life, charge the battery at regular intervals.

SBLV 20 A1

│

13 ■

Disposal

Disposal of the device

The adjacent symbol of a crossed-out wheelie bin means that this device is

subject to Directive 2012/19/EU. This directive states that this device may not

be disposed of in the normal household waste at the end of its useful life, but

must be handed over to specially set-up collection locations, recycling depots or

disposal companies.

This disposal is free of charge for the user. Protect the environment and

dispose of this device properly.

You can obtain further information from your local disposal company or the city

or local authority.

Appendix

Technical data

Input voltage/frequency 220–240 V ∼, 50 Hz

Protection class

II /

Power consumption

- Operation

- Standby

max. 20 W

< 0.5 W (when battery is charged)

Bluetooth

speciﬁcations

Version 2.1 (range of up to 10

metres)

Supported Bluetooth

proﬁles A2DP and AVRCP

Max. loudspeaker output power 2 x 10 W RMS (with 10% THD)

Frequency range speaker 100 Hz–15 kHz

Integrated battery 2 x 3.7 V, 2500 mAh (Li-ion)

Charging time approx. 6 hours

Operating time approx. 4 hours (at medium volume)

Operating temperature +15°C to +35°C

Permanent storage temperature +5°C to +40°C

Humidity (no condensation) 5 to 75%

Dimensions (W x D x H) approx. 36.5 x 23.7 x 23 cm

Weight approx. 4.2 kg

SBLV 20 A1■ 14

│

Notes on the EU Declaration of Conformity

This device complies with the fundamental speciﬁcations and other relevant regula-

tions of the Low Voltage Directive 2006/95/EC, the R&TTE directive 1999/5/EC,

the ErP Directive 2009/125/EC, the EMC directive 2004/108/EC and the

RoHS directive 2011/65/EU.

You can request the full EU Declaration of conformity from the importer.

Warranty

This device is provided with a 3-year warranty valid from the date of purchase.

This device has been manufactured with care and inspected meticulously prior to

delivery.

Please retain your receipt as proof of purchase. In the event of a warranty claim,

please contact your Customer Service unit by telephone. This is the only way to

guarantee free return of your goods.

NOTE

► The warranty only covers claims for material and manufacturing defects,

not for transport damage, worn parts or damage to fragile components

such as buttons or rechargeable batteries.

This product is intended solely for private use and not for commercial purposes.

The warranty shall be deemed void in cases of misuse or improper handling, use

of force and modiﬁcations/repairs which have not been carried out by one of

our authorised Service centres.

Your statutory rights are not restricted by this warranty.

The warranty period is not prolonged by repairs eﬀected under the warranty.

This also applies to replaced and repaired components. Any damage and defects

present at the time of purchase must be reported immediately after unpacking,

but no later than two days after the date of purchase. Repairs carried out after

expiry of the warranty period shall be subject to charge.

Service

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: [email protected]

IAN 273789

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: [email protected]

IAN 273789

SBLV 20 A1

│

15 ■

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Page is loading ...

IAN 273789

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DEUTSCHLAND / GERMANY

www.kompernass.com

Last Information Update · Stand der Informationen:

12 / 2015 · Ident.-No.: SBLV20A1-102015-2

Silvercrest SBLV 20 A1 Operating Instructions And Safety Instructions

Brand: Silvercrest

Model: SBLV 20 A1

Category: Portable speakers

Type: Operating Instructions And Safety Instructions

Download PDF

report

in other languages

Deutsch: Silvercrest SBLV 20 A1

Silvercrest SBLV 20 A1 Operating Instructions And Safety Instructions

Silvercrest SBLV 20 A1 Operating Instructions And Safety Instructions

in other languages

Related papers

Other documents