DeWalt DC019 User manual

Page is loading ...

2

Copyright DEWALT

Dansk (oversat fra original brugsvejledning) 4

Deutsch (übersetzt von den Originalanweisungen) 13

English (original instructions) 23

Español (traducido de las instrucciones originales) 31

Français (traduction de la notice d’instructions originale) 40

Italiano (tradotto dalle istruzioni originali) 49

Nederlands (vertaald vanuit de originele instructies) 58

Norsk (oversatt fra de originale instruksjonene) 67

Português (traduzido das instruções originais) 75

Suomi (käännetty alkuperäisestä käyttöohjeesta) 85

Svenska (översatt från de ursprungliga instruktionerna) 93

Türkçe (orijinal talimatlardan çevrilmiştir) 102

Ελληνικά (μετάφραση από τις πρωτότυπες οδηγίες) 111

Page is loading ...

ENGLISH

23

HEAVY-DUTY CORDLESS/CORDED WORKLIGHT

DC019/DC020

Congratulations!

You have chosen a DEWALT product. Years of

experience, thorough product development and

innovation make DEWALT one of the most reliable

partners for professional users.

Technical Data

DC019 DC020 DC020LX

Voltage V

AC

230 230 –

(U.K. & Ireland only) V

AC

– 230 115

Max. Rated Current A 3.2 15 –

(U.K. & Ireland only) A – 15 3.2

Battery V

DC

12–18 12–18 12–18

NiCd/ NiCd/ NiCd/

NiMH/ NiMH/ NiMH/

Li-Ion Li-Ion Li-Ion

Fluorescent Lamp V

AC

230 230 115

W 38 38 38

Weight (unit only) kg 2.5 2.7 2.5

Outlets

Europe 230 V

AC

tools 15 Amperes –

U.K. & Ireland 230 V

AC

tools 12 Amperes –

Deﬁ nitions: Safety Guidelines

The definitions below describe the level of severity

for each signal word. Please read the manual and

pay attention to these symbols.

DANGER: Indicates an imminently

hazardous situation which, if not

avoided, will result in death or serious

injury.

WARNING: Indicates a potentially

hazardous situation which, if not

avoided, could result in death or

serious injury.

CAUTION: Indicates a potentially

hazardous situation which, if not

avoided, may result in minor or

moderate injury.

CAUTION: Used without the safety alert

symbol indicates a potentially hazardous

situation which, if not avoided, may

result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.

Important Safety Rules

1. WARNING! When using the DC019 and

DC020 worklights, basic precautions should

always be followed, including the following:

a. Read all the instructions before using the

DC019 and DC020 worklights.

b. To reduce the risk of injury, close supervision

is necessary when a worklight is used near

children.

c. Do not contact moving parts.

d. Only use attachments recommended or sold

by the manufacturer.

e. Do not use outdoors.

f. To disconnect, turn all controls to the off

(“O”) position, then remove plug from outlet.

g. Do not unplug by pulling on cord. To unplug,

grasp the plug, not the cord.

h. Unplug from outlet when not in use and

before servicing or cleaning.

i. Do not operate any worklight with a

damaged cord or plug, or after the worklight

malfunctions or is dropped or damaged in

any manner. Return worklight to the nearest

authorized service facility for examination,

repair, or electrical or mechanical adjustment.

j. To reduce the risk of electrical shock, do not

put worklight in water or other liquid. Do not

place or store worklight where it can fall or

be pulled into a tub or sink.

k. Use only the charger supplied by the

manufacturer.

l. Always unplug before replacing the bulb.

Replace bulb with same type rated 38 Watts.

m. Connect to a properly grounded outlet. Refer

to Grounding Instructions.

ENGLISH

24

Safety Rules for Worklights

WARNING: Burn hazard. Do not

operate flashlight near flammable

liquids or in gaseous or explosive

atmospheres. Internal sparks may ignite

fumes causing personal injury.

WARNING: Shock hazard. Remove

battery pack before replacing the

fluorescent bulb.

• Vision may be impaired when looking directly

into fluorescent light.

• Do not expose light to wet or damp areas. Use

only in dry locations. Do not allow any liquid to

get inside worklight. Do not submerge worklight

in any liquid.

• The worklight is intended for household and

commercial use.

• Do not operate without lens cover assembly

attached.

• Before using battery, read all instructions and

cautionary markings on battery pack, and

product using battery pack.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

WARNING: Shock hazard. Do not allow

any liquid to get inside worklight. Electric

shock may result.

CAUTION: Under certain conditions,

with the worklight plugged in to the

power supply, the exposed contacts

inside the worklight can be shorted

by foreign material. Foreign materials

of a conductive nature such as, but

not limited to, steel wool, aluminum

foil, or any buildup of metallic particles

should be kept away from charger

cavities. Always unplug worklight before

attempting to clean.

• In case of damaged power supply cord the

supply cord must be replaced immediately by

the manufacturer, its service agent or similar

qualified person to prevent any hazard.

• Do not expose worklight to rain or snow.

The worklight is intended for household and

commercial use.

• Make sure cord is located so that it will not

be stepped on, tripped over, or otherwise

subjected to damage or stress.

• Do not use an extension cord unless it is

absolutely necessary. Use of an improper

extension cord could result in risk of fire, electric

shock or electrocution.

• Place the worklight in a position away from any

heat source.

• Do not place any object on top of worklight

or place the worklight on a soft surface that

might block the ventilation slots and result in

excessive internal heat. Place the worklight in

a position away from any heat source.

• Do not operate worklight with a damaged

cord or plug — have them replaced

immediately.

• Do not operate the worklight if it has received

a sharp blow, been dropped, or otherwise

damaged in any way. Take it to an authorised

service center.

• Do not disassemble worklight. Take it to an

authorized service center when service or

repair is required. Incorrect reassembly may

result in a risk of electric shock, electrocution or

fire.

• Disconnect the worklight from the outlet

before attempting any cleaning. This will

reduce the risk of electric shock. Removing

the battery pack will not reduce this risk.

• The DC020 (230 V) worklights are designed

to operate on 230 Volts, 50 Hz AC (except

outlets). The DC020 (115 V) is designed

to operate on 115 Volts, 50 Hz AC. It also

operates on direct current (DC) through a

fully charged battery pack. Do not use any

other voltage.

Residual Risks

• The following risks are inherent to the use of this

appliance:

– impaired vision when looking directly into

fluorescent light

– burns from touching a hot bulb

Grounding Instructions

The DC020 (230 V) worklight must be grounded. In

the event of malfunction or breakdown, grounding

provides a path of least resistance for electric current

to reduce the risk of electric shock. The worklight

are equipped with a cord having an equipment-

grounding conductor and a grounding plug. The

ENGLISH

25

plug must be plugged into an appropriate outlet that

is properly installed and grounded in accordance

with all local codes and ordinances.

DANGER: Improper connection of the

equipment grounding conduct or can

result in a risk of electric shock. The

conductor with insulation having an

outer surface that is green with yellow

stripes is the equipment grounding

conductor. If repair or replacement of

the cord or plug is necessary, do not

connect the equipment-grounding

conductor to a live terminal. Repairs

shall only be performed by D

EWALT

service agent. Do not modify the plug

provided with the worklight – if it will

not fit the outlet, have a proper outlet

installed by a DEWALT repair agent.

FOR GROUNDED, CORD-CONNECTED WORKLIGHT RATED

16A AND LOWER AND INTENDED FOR USE ON A NOMINAL

230 V SUPPLY CIRCUIT

The worklight is for use on a nominal 230 V circuit,

and has a grounding plug that looks like the plug in

the following illustration.

DC020

DC020 BD

Worklight

The worklight accepts 12–18 V NiCd, NiMH or Li-Ion

batteries.

Important Safety Instructions for All

Battery Packs

When ordering replacement battery packs, be sure

to include catalog number and voltage.

The battery pack is not fully charged out of the

carton. Before using the battery pack and charger,

read the safety instructions below. Then follow

charging procedures outlined in the charger manual.

READ ALL INSTRUCTIONS

• Do not charge or use battery in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Inserting

or removing the battery from the charger may

ignite the dust or fumes.

• Charge the battery packs only in D

EWALT

chargers.

• DO NOT splash or immerse in water or other

liquids.

• Do not store or use the tool and battery

pack in locations where the temperature

may reach or exceed 40˚ C (105° F) (such as

outside sheds or metal buildings in summer).

DANGER: Electrocution hazard. Never

attempt to open the battery pack for

any reason. If battery pack case is

cracked or damaged, do not insert into

charger. Electric shock or electrocution

may result. Damaged battery packs

should be returned to service center for

recycling.

WARNING: Never attempt to open the

battery pack for any reason. If battery

pack case is cracked or damaged, do

not insert into charger. Do not crush,

drop or damage battery pack. Do not

use a battery pack or charger that has

received a sharp blow, been dropped,

run over or damaged in any way (i.e.,

pierced with a nail, hit with a hammer,

stepped on). Damaged battery packs

should be returned to service center

for recycling.

CAUTION: When not in use, place

tool on its side on a stable surface

where it will not cause a tripping or

falling hazard. Some tools with large

battery packs will stand upright on the

battery pack but may be easily knocked

over.

SPECIFIC SAFETY INSTRUCTIONS FOR NICKEL CADMIUM

(NiCd) OR NICKEL METAL HYDRIDE (NiMH)

• Do not incinerate the battery pack even if it

is severely damaged or is completely worn

out. The battery pack can explode in a fire.

• A small leakage of liquid from the battery

pack cells may occur under extreme usage

or temperature conditions. This does not

indicate a failure.

However, if the outer seal is broken:

a. and the battery liquid gets on your skin,

immediately wash with soap and water for

several minutes.

ENGLISH

26

b. and the battery liquid gets into your eyes,

flush them with clean water for a minimum

of 10 minutes and seek immediate medical

attention. (Medical note: The liquid is

25-35% solution of potassium hydroxide.)

SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION

(LI ION)

• Do not incinerate the battery pack even if it

is severely damaged or is completely worn

out. The battery pack can explode in a fire.

Toxic fumes and materials are created when

lithium ion battery packs are burned.

• If battery contents come into contact with

the skin, immediately wash area with mild

soap and water. If battery liquid gets into the

eye, rinse water over the open eye for

15 minutes or until irritation ceases. If medical

attention is needed, the battery electrolyte

is composed of a mixture of liquid organic

carbonates and lithium salts.

• Contents of opened battery cells may cause

respiratory irritation. Provide fresh air. If

symptoms persists, seek medical attention.

WARNING: Burn hazard. Battery liquid

may be flammable if exposed to spark

or flame.

Battery Cap (ﬁ g. 2)

A protective battery cap is supplied to cover the

contacts of a detached battery pack. Without the

protective cap in place, loose metal objects could

short circuit the contacts, causing a fire hazard and

damaging the battery pack.

1. Take off the protective battery cap before

placing the battery pack in the charger

or tool (fig. 2A).

2. Place the protective cap over the contacts

immediately after removing the battery pack

from the charger or tool (fig. 2B).

WARNING: Make sure the protective

battery cap is in place before storing or

carrying a detached battery pack.

Battery Pack

DC019 AND DC020 BATTERY TYPE

The DC019 and the DC020 will provide light using

12–18 Volt DEWALT nickel cadmium, nickel metal

hydride and lithium ion battery packs. Run-time per

one 18 V battery is one hour or greater.

Your battery may be charged in DEWALT

1 hour chargers, 15 minute chargers or vehicular

12 volt chargers. Be sure to read all safety

instructions before using your charger.

The 38W fluorescent worklight will run on 12–18V

D

EWALT batteries or 230 V and 115 V AC Power.

Storage Recommendations

1. The best storage place is one that is cool and

dry away from direct sunlight and excess heat

or cold. For optimum battery performance and

life, store battery packs at room temperature

when not in use.

NOTE: Li-Ion battery packs should be fully

charged when stored.

2. Long storage will not harm the battery pack or

charger. Under proper conditions, they can be

stored for up to 5 years.

Labels on Battery Pack

In addition to the pictographs used in this manual,

the labels on the battery pack show the following

pictographs:

Read instruction manual

before use.

Do not probe with conductive objects.

Do not use damaged battery packs.

Use only with DEWALT battery packs,

others may burst, causing personal injury

and damage.

Do not expose to water.

Have defective cords replaced

immediately.

Discard the battery pack with due care for

the environment.

Do not incinerate the battery pack

NiMH, NiCd+ and Li-Ion.

Labels on Worklight

The following pictograms are shown on the

worklight:

Read instruction manual

before use.

ENGLISH

27

Ensure correct bulb is used.

Do not use near fire.

Do not plug cord in.

Correct bulb placement.

Battery clamp down.

DATE CODE POSITION

Date Code, which also includes the year of

manufacture, is printed into the housing surface that

forms the mounting joint between tool and battery!

Example:

2010 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Worklight

1 Instruction manual

1 Exploded drawing

• Check for damage to the worklight, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

INTENDED USE

The DC019 and DC020 worklights are designed to

use as a light source.

The DC019 and DC020 worklights are professional

appliances. DO NOT let children come into

contact with the tool. Supervision is required when

inexperienced operators use this tool.

a. ON/OFF switch

b. Handle

c. Battery port

d. 16 Amp outlets (DC020 QW, 230 V only)

13 Amp outlets (DC020 GB, 230 V only)

e. Power cord

f. Built-in cord wrap

g. Battery hold-down

h. Fluorescent bulb

i. Lens cover

j. Worklight housing

k. Support arm

l. Rubber gasket

m. Bulb guard

Electrical Safety

The electrical product has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

DC020 LX; DC019

Your tool is double insulated in

accordance with EN 60598.

DC020 BD, QW and GB are grounded (class I)

according to EN 60335 and EN 60598.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 3 A.

Fitting a Mains Plug to 115 V Units

(U.K. and Ireland only)

• The plug should be fitted by a competent

person. If you are in doubt, contact an

authorized DEWALT repair agent or a qualified

electrician.

• The wires are coloured according to the

following code:

live = brown

neutral = blue

• Do not connect the blue or brown wire to the

earth terminal in the plug. Connect as follows:

brown to terminal marked ‘L’

blue to terminal marked ‘N’

ENGLISH

28

• The plug fitted should be comply with BS

EN 60309 (BS4343), 16 Amps, earthing

contact position 4h.

WARNING: Always ensure that the

cable clamp is correctly and securely

fitted to the sheath of the cable.

Using an Extension Cable

WARNING: Keep electrical cords in

good condition. Do not use worn, bare,

or frayed cords because they can cause

electrical shock.

WARNING: Operating equipment at low

voltage can cause it to overheat. Using

an excessively long extension cord can

cause the cord to overheat.

Only use grounded extension cords that are rated

for outdoor use and equipment with a third-wire

ground.

If an extension cable is required, use an approved

three-wire extension cable suitable for the power

input of this tool (see technical data).

The minimum conductor size is 1.5 mm

2

. When

using a cable reel, always unwind the cable

completely.

OPERATION

AC Operation

1. Unwrap power cord and plug into 115 or 230 V

AC wall outlet.

2. DC020 BD, QW, GB (230 V AC): The two

sockets are now active and can be used.

NOTE: The two sockets are only active during

AC use.

Battery Operation (ﬁ g. 1, 4)

1. Place the folded up DC020 on a stable, level

surface, lens cover (i) side down.

2. Lift the battery hold-down (g) with one hand and

insert the battery pack into the battery port (c).

Slowly place the battery hold-down on battery

pack to hold the battery pack firmly.

3. With one hand securely holding the handle

(b), use the other hand to lift the worklight

housing(j).

Usage (ﬁ g. 1, 5)

1. Place the folded up DC020 on a stable, level

surface.

2. The worklight housing can be positioned in

different positions. With one hand securely

holding the handle (b), use the other hand to lift

the support arm (k) to one of the five positions

shown.

3. Position the worklight as desired. Press the

ON/OFF switch (a) to ON.

When finished using the worklight, turn the ON/OFF

switch to OFF, fold the worklight housing down to

the flat position for storage.

Replacing the Fluorescent Bulb

(ﬁ g. 1, 6)

WARNING: Shock Hazard.

Disconnect battery pack and unplug

tool before replacing the fluorescent

bulb. Such preventative safety

measures reduce the risk of personal

injury.

CAUTION: Vision may be impaired

when looking directly into

fluorescent light.

CAUTION: Cut hazard. If replacing a

broken bulb, protect your hands before

attempting to remove the bulb. Do not

remove any pieces of broken glass or

bulb from the socket area with bare

hands, or personal injury may occur.

To change the fluorescent bulb, the worklight

housing must be in an upward position as shown in

figure 1.

CAUTION: To avoid damage to the

worklight, DO NOT separate the

rubber gasket from the lens cover. The

rubber gasket is permanently attached.

NOTE: Recommended replacement bulb is the

DEWALT DC0213 38W fluorescent bulb.

NOTE: Avoid touching the reflective surface. Surface

contamination will decrease reflectivity.

1. With one hand securing the bottom corner of

the worklight housing (j) and lens cover (i), use

the other hand to roll back the rubber gasket (l)

from the worklight housing starting at one of the

bottom corners.

2. Still securely holding the worklight housing roll

back the rubber gasket from all sides of the

housing, finishing at the top.

3. Remove the rubber gasket (l) and lens cover (i)

and set aside.

4. With one hand securing the bottom corner of

the worklight housing, use the other hand to

remove the bulb guard (m). Gently squeeze the

sides of the bulb guard with the thumb and

index finger to release it from the clips. Set the

bulb guard aside.

ENGLISH

29

5. Secure the bottom corner of the worklight

housing with one hand. Use the other hand

to firmly grasp the fluorescent bulb (h) at the

center and hold onto the white plastic housing

under the bulb guard. While still securing the

bottom corner, gently remove the bulb from the

worklight housing as shown. Ensure that the

socket and area around the socket is free of

dirt, dust and other contaminants.

6. Align the replacement fluorescent bulb in the

same orientation as the previous bulb. Secure

the bottom corner of the worklight housing with

one hand. Using the other hand, carefully press

on the center of the bulb’s plastic housing to

secure it in place.

7. Once the replacement bulb is in place, gently

press the center of the bulb’s plastic housing

to ensure it is connected properly. Replace

the bulb guard by clipping it to the worklight

housing.

8. Replace the lens cover. Place the rubber gasket

in one of the top corners and roll the gasket

onto the other top corner, finishing on a bottom.

Ensure the rubber gasket is firmly in place

around the worklight housing.

MAINTENANCE

Your DEWALT appliance has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: Shock Hazard.

Disconnect battery pack and unplug

tool before replacing the fluorescent

bulb. Such preventative safety

measures reduce the risk of personal

injury.

Service Notes

This product is not user serviceable. Other than

the replacement bulb, there are no user

serviceable parts inside the worklight. Servicing at

an authorized service center is required to avoid

damage to static sensitive internal components.

Cleaning

WARNING: Remove the battery

pack and disconnect worklight from

the AC outlet before cleaning. Never

use solvents or other harsh chemicals

for cleaning the non-metallic parts of

the tool. These chemicals may weaken

the non-metallic materials used in these

parts. Use a cloth dampened only with

water and mild soap or soft non-metallic

brush. Never let any liquid get inside the

worklight; never immerse any part of the

worklight into a liquid.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have

not been tested with this product, use

of such accessories with this tool could

be hazardous. To reduce the risk of

injury, only DEWALT, recommended

accessories should be used with this

product.

Consult your dealer for further information on the

appropriate accessories.

Protecting the Environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your DEWALT product

needs replacement, or if it is of no further use to you,

do not dispose of it with household waste. Make this

product available for separate collection.

Separate collection of used products

and packaging allows materials to be

recycled and used again. Re-use of

recycled materials helps prevent

environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate collection

of electrical products from the household, at

municipal waste sites or by the retailer when you

purchase a new product.

DEWALT provides a facility for the collection and

recycling of DEWALT products once they have

reached the end of their working life. To take

advantage of this service please return your product

to any authorised repair agent who will collect them

on our behalf.

You can check the location of your nearest

authorised repair agent by contacting your local

D

EWALT office at the address indicated in this

manual. Alternatively, a list of authorised D

EWALT

repair agents and full details of our after-sales

service and contacts are available on the Internet at:

www.2helpU.com.

ENGLISH

30

Rechargeable Battery Pack

This long life battery pack must be recharged when

it fails to produce sufficient power on jobs which

were easily done before. At the end of its technical

life, discard it with due care for our environment:

• Run the battery pack down completely, then

remove it from the tool.

• NiCd, NiMH and Li Ion cells are recyclable. Take

them to your dealer or a local recycling station.

The collected battery packs will be recycled or

disposed of properly.

THE FOLLOWING BATTERIES ARE COMPATIBLE WITH

THESE WORKLIGHTS:

DE9074 12 V NiCd 1.3 Ah

DE9071 12 V NiCd 2.0 Ah

DE9075 12 V NiCd 2.4 Ah

DE9501 12 V NiMH 2.6 Ah

DE9094 14.4 V NiCd 1.3 Ah

DE9091 14.4 V NiCd 2.0 Ah

DE9092 14.4 V NICd 2.4 Ah

DE9502 14.4 V NiMH 2.6 Ah

DE9140 14.4 V Li-Ion 2.0 Ah

DE9098 18 V NiCd 1.3 Ah

DE9095 18 V NiCd 2.0 Ah

DE9096 18 V NiCd 2.4 Ah

DE9503 18 V NiMH 2.6 Ah

DE9180 18 V Li-Ion 2.0 Ah

GUARANTEE

DEWALT is confident of the quality of its

products and offers an outstanding guarantee

for professional users of the product. This

guarantee statement is in addition to and in

no way prejudices your contractual rights as a

professional user or your statutory rights as a

private non-professional user. The guarantee

is valid within the territories of the Member

States of the European Union and the

European Free Trade Area.

• 30 DAY NO RISK SATISFACTION GUARANTEE •

If you are not completely satisfied with the

performance of your D

EWALT tool, simply

return it within 30 days, complete with all

original components, as purchased, to

the point of purchase, for a full refund or

exchange. The product must have been

subject to fair wear and tear and proof of

purchase must be produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your

DEWALT tool, in the 12 months following

purchase, you are entitled to one service free

of charge. It will be undertaken free of charge

at an authorised DEWALT repair agent. Proof

of purchase must be produced. Includes

labour. Excludes accessories and spare parts

unless failed under warranty.

• ONE YEAR FULL WARRANTY •

If your D

EWALT product becomes defective

due to faulty materials or workmanship

within 12 months from the date of purchase,

DEWALT guarantees to replace all defective

parts free of charge or – at our discretion –

replace the unit free of charge provided that:

• The product has not been misused;

• The product has been subject to fair

wear and tear;

• Repairs have not been attempted by

unauthorised persons;

• Proof of purchase is produced.

• The product is returned complete with all

original components

If you wish to make a claim, contact your

seller or check the location of your nearest

authorised D

EWALT repair agent in the

D

EWALT catalogue or contact your DEWALT

office at the address indicated in this manual.

A list of authorised DEWALT repair agents and

full details of our after-sales service is available

on the Internet at: www.2helpU.com

Page is loading ...

PORTUGUÊS

83

AS SEGUINTES BATERIAS SÃO COMPATÍVEIS COM ESTAS

LANTERNAS PROFISSIONAIS:

DE9074 12 V NiCd 1,3 Ah

DE9071 12 V NiCd 2,0 Ah

DE9075 12 V NiCd 2,4 Ah

DE9501 12 V NiMH 2,6 Ah

DE9094 14,4 V NiCd 1,3 Ah

DE9091 14,4 V NiCd 2,0 Ah

DE9092 14,4 V NiCd 2,4 Ah

DE9502 14,4 V NiMH 2,6 Ah

DE9140 14,4 V Li-Ion 2,0 Ah

DE9098 18 V NiCd 1,3 Ah

DE9095 18 V NiCd 2,0 Ah

DE9096 18 V NiCd 2,4 Ah

DE9503 18 V NiMH 2,6 Ah

DE9180 18 V Li-Ion 2,0 Ah

Page is loading ...

ΕΛΛΗΝΙΚΑ

120

ΟΙ ΠΑΡΑΚΑΤΩ ΜΠΑΤΑΡΙΕΣ ΕΙΝΑΙ ΣΥΜΒΑΤΕΣ

ΜΕ ΤΟΥΣ ΠΑΡΟΝΤΕΣ ΠΡΟΒΟΛΕΙΣ ΕΡΓΑΣΙΑΣ:

DE9074 12 V NiCd 1,3 Ah

DE9071 12 V NiCd 2,0 Ah

DE9075 12 V NiCd 2,4 Ah

DE9501 12 V NiMH 2,6 Ah

DE9094 14,4 V NiCd 1,3 Ah

DE9091 14,4 V NiCd 2,0 Ah

DE9092 14,4 V NiCd 2,4 Ah

DE9502 14,4 V NiMH 2,6 Ah

DE9140 14,4 V Li-Ion 2,0 Ah

DE9098 18 V NiCd 1,3 Ah

DE9095 18 V NiCd 2,0 Ah

DE9096 18 V NiCd 2,4 Ah

DE9503 18 V NiMH 2,6 Ah

DE9180 18 V Li-Ion 2,0 Ah

Page is loading ...

DeWalt DC019 User manual

This manual is also suitable for

DeWalt DC019 User manual

in other languages

Related papers

Other documents