Page is loading ...
HIS DESIGN IS THE PROPRIETARY
TRADE DRESS/TRADEMARK OF
W SCHONBEK LLC.
T
HABSBURG
S9230- __ __O
60
WWW.SCHONBEK.COM/INSTALLATIONMANUAL
Schonbek, 61 Industrial Blvd, Plattsburgh, New York 12901 | Phone: 1-800-836-1892 | Fax: 518-563-4228 | www.schonbek.com | May 2022
S9230-__ __O PAGE 2 S9230-__ __O PAGE 7
1
Electrical Danger Turn Power O
WARNING:
17
18
All electrical components must be installed by
a licensed electrician in accordance with the
National Electric Code and the
appropriate local electrical codes.
12
10
9
11
2
3
4
5
6
7
890498/115/1
15
14
13
16
L
N
S9230-__ __O PAGE 3
S9230-__ __O PAGE 6
S9230-__ __O PAGE 5S9230-__ __O PAGE 4
You will need 6 - B10
25 Watts Recommended
60 Watts Max
21
20
90498/115/2
90498/115
90500/178
90500/178
400/22S
118/1S
N22265-**
90501/11/1S
22
19
Install arms into washer. Line up holes in
arms with stud in washer. Use lock washer and
nut to secure arms in place.
Connect ground wire in each arm to ground wire
in center column. NO MORE THAN 5-WIRES
PER WIRE NUT. Use electrical tape to secure
wire nuts. Sucient quantities of jumper wires
and wire nuts are provided.
Connect white arm wires to neutral column wire
(ribbed or marked is neutral).
Connect black arm wires to the power wire in
column.
Carefully press wires as close as possible to the
underside of washer.
Raise glass assembly and check ring over
threaded rod and secure in place with round nut.
X1
: 100/8X1
: 416/1
LOCK WASHER - 416/1
NUT - 100/8
/