CEL-FI SOLO RED 0.5W ERCES Public Operating instructions

Brand: CEL-FI

Model: SOLO RED 0.5W ERCES Public

Type: Operating instructions

This manual is also suitable for

Cel-Fi SOLO RED 0.5W ERCES Public

CEL-FI Cel-Fi SOLO RED 0.5W ERCES Public is a high-performance signal booster designed for public safety applications. It amplifies cellular signals, improving voice and data connectivity for first responders and other critical personnel operating in weak signal areas. The device is easy to install and can be used in a variety of indoor locations, including buildings, tunnels, and underground facilities. With its compact size and rugged construction, the CEL-FI Cel-Fi SOLO RED 0.5W ERCES Public is ideal for use in demanding environments.

Safety Precautions

•When installing the equipment, all the requirements

of the manufacturer and the referenced standards

must be met.

• There are no user serviceable parts inside.

Warranty

Nextivity Inc provides a limited warranty for its prod-

ucts. For details, please refer to http://cel-fi.com/war-

ranty

Limitation of Liability

In no event shall Nextivity, nor its directors, employees,

agents, suppliers or End Users, be liable under con-

tract, tort, strict liability, negligence or any other legal

or equitable theory with respect to the Products or

any other subject matter of this Agreement (i) for any

lost profit, cost of procurement of substitute goods

or services, or special, indirect, incidental, punitive, or

consequential damages of any kind whatsoever or (ii)

for any direct damages in excess of (in the aggregate)

the fees actually received by Nextivity from End User

with respect to the Products actually purchased and

paid for.

See www.cel-fi.com for list of patents covering this

product.

FCC

Part 90 Signal Boosters. THIS IS A 90.219 CLASS A DEVICE

WARNING. This is NOT a CONSUMER device. It is designed for installation

by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an

FCC LICENSE or express consent of an FCC License to operate this device.

You MUST register Part 90 Class B signal boosters (as defined in 47

CFR 90.219) online at www.fcc.gov/signal-boosters/registration.

Unauthorized use may result in significant forfeiture penalties,

including penalties in excess of $100,000 for each continuing violation.

WARNING

Changes or modications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC Statement

NOTE: For a Class A digital device or peripheral, the

instructions furnished to the user shall include the

following or similar statement, placed in a prominent

location in the text of the manual: NOTE: This equip-

ment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference

when the equipment is operated in a commercial en-

vironment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may

cause harmful interference to radio communications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case the

user will be required to correct the interference at his

own expense.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference re-

ceived, including interference that may cause unde-

sired operation.

In order to comply with FCC RF Exposure require-

ments:

1. The donor antenna must be installed to

provide at least 65 cm separation from the

human body at all times.

2. The server antenna must be installed to

provide at least 20 cm separation from the

human body at all times.

Do not call your service provider until you have read the User Manual.

If you need help, visit: www.cel-.com/support/

Cel-Fi® SOLO RED

for Public Safety

MODEL NUMBER:

L41-7E

MODEL NUMBER:

L41-7E

PRODUCT INFORMATION PRODUCT INFORMATION

Cel-Fi® SOLO RED

for Public Safety

Caution

• This device may be operated ONLY in a fixed

location for in-building use. Home/personal use is

prohibited.

• External Antenna: Only the antennas listed in the

Antenna Kitting section of the user manual are

allowed to be used with this device. Use of

unauthorized antennas, cables, and/or coupling

devices not conforming with ERP/EIRP and/or

indoor-only restrictions is prohibited.

Safety Precautions

•When installing the equipment, all the requirements

of the manufacturer and the referenced standards

must be met.

• There are no user serviceable parts inside.

Warranty

Nextivity Inc provides a limited warranty for its prod-

ucts. For details, please refer to http://cel-fi.com/war-

ranty

Limitation of Liability

In no event shall Nextivity, nor its directors, employees,

agents, suppliers or End Users, be liable under con-

tract, tort, strict liability, negligence or any other legal

or equitable theory with respect to the Products or

any other subject matter of this Agreement (i) for any

lost profit, cost of procurement of substitute goods

or services, or special, indirect, incidental, punitive, or

consequential damages of any kind whatsoever or (ii)

for any direct damages in excess of (in the aggregate)

the fees actually received by Nextivity from End User

with respect to the Products actually purchased and

paid for.

See www.cel-fi.com for list of patents covering this

product.

FCC

Part 90 Signal Boosters. THIS IS A 90.219 CLASS A DEVICE

WARNING. This is NOT a CONSUMER device. It is designed for installation

by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an

FCC LICENSE or express consent of an FCC License to operate this device.

You MUST register Part 90 Class B signal boosters (as defined in 47

CFR 90.219) online at www.fcc.gov/signal-boosters/registration.

Unauthorized use may result in significant forfeiture penalties,

including penalties in excess of $100,000 for each continuing violation.

WARNING

Changes or modications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC Statement

NOTE: For a Class A digital device or peripheral, the

instructions furnished to the user shall include the

following or similar statement, placed in a prominent

location in the text of the manual: NOTE: This equip-

ment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference

when the equipment is operated in a commercial en-

vironment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may

cause harmful interference to radio communications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case the

user will be required to correct the interference at his

own expense.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference re-

ceived, including interference that may cause unde-

sired operation.

In order to comply with FCC RF Exposure require-

ments:

1. The donor antenna must be installed to

provide at least 65 cm separation from the

human body at all times.

2. The server antenna must be installed to

provide at least 20 cm separation from the

human body at all times.

Do not call your service provider until you have read the User Manual.

If you need help, visit: www.cel-.com/support/

Caution

• This device may be operated ONLY in a fixed

location for in-building use. Home/personal use is

prohibited.

• External Antenna: Only the antennas listed in the

Antenna Kitting section of the user manual are

allowed to be used with this device. Use of

unauthorized antennas, cables, and/or coupling

devices not conforming with ERP/EIRP and/or

indoor-only restrictions is prohibited.

1. L’antenne du donneur doit être installée pour

fournir une séparation d’au moins 65 cm du

corps humain en tout temps.

2. L’antenne du serveur doit être installée pour

fournir une séparation d’au moins 20 cm du

corps humain en tout temps.

The Manufacturer’s rated output power of this equip-

ment is for single carrier operation. For situations

when multiple carrier signals are present, the rating

would have to be reduced by 3.5 dB, especially where

the output signal is re-radiated and can cause interfer-

ence to adjacent band users. This power reduction is

to be by means of input power or gain reduction and

not by an attenuator at the output of the device.

[FRENCH: La puissance de sortie nominale

indiquée par le fabricant pour cet appareil

concerne son fonctionnement avec porteuse

unique. Pour des appareils avec porteuses

multiples, on doit réduire la valeur nominale de 3,5dB,

surtout si le signal de sortie est retransmis et qu’il

peut causer du brouillage aux utilisateurs de bandes

adjacentes. Une telle réduction doit porter sur la

puissance d’entrée ou sur le gain, et ne doit pas se

faire au moyen d’un atténuateur raccordé à la sortie

du dispositif.]

1. This device may not cause interference.

2. This device must accept any interference,

in-cluding interference that may cause

undesired operation of the device.

[French: L’émetteur/récepteur exempt de licence

contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique

Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions

suivantes:

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage ra-

dioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionne-

ment.]

CAN ICES-3 (A)/NMB-3(A)

Compliance Contact

In the event of regulatory compliance issue, please

contact Nextivity Inc. directly. Contact information is

available at www.nextivityinc.com.

Patents

This product is covered by Nextivity, Inc., US patents

and patents pending. Please refer to cel-.com for

details.

Reproduction or media conversion by any means is

protected by copyright and may only occur with prior

written permission of Nextivity. Designed by Nextivity

in California.

Trademark

Cel-Fi and the Nextivity logo are trademarks of Nex-

tivity, Inc.

If you need help, visit: www.cel-.com/support.

legal_solo-red_classA_eng_22-0113 legal_solo-red_classA_eng_22-0113

Nextivity UK Ltd

Unit 9, Basepoint Business Centre Rivermead Drive, Westlea Swindon SN5 7EX

Nextivity Singapore Pte. Ltd.

2 Changi Business Park Avenue 1, Level 2 – Suite 16, 486015 Singapore

Bureau in Europe Union

Carrer Bassols 15-1, Bacelona 08026, Spain

Nextivity UK Ltd

Unit 9, Basepoint Business Centre Rivermead Drive, Westlea Swindon SN5 7EX

Nextivity Singapore Pte. Ltd.

2 Changi Business Park Avenue 1, Level 2 – Suite 16, 486015 Singapore

Bureau in Europe Union

Carrer Bassols 15-1, Bacelona 08026, Spain

U.S. Headquarters: Nextivity Inc.

16550 West Bernardo Drive, Bldg. 5, Suite 550

San Diego, CA 92127, USA

Phone: +1 858.485.9442 • www.cel-.com

U.S. Headquarters: Nextivity Inc.

16550 West Bernardo Drive, Bldg. 5, Suite 550

San Diego, CA 92127, USA

Phone: +1 858.485.9442 • www.cel-.com

420N007-L41-001-10RB420N007-L41-001-10RB

ISED STATEMENT

WARNING: This is NOT a CONSUMER device. It is de-

signed for installation by an installer approved by an

ISED licensee. You MUST have an ISED LICENCE or

the express consent of an ISED licensee to operate

this device.

This device may operate in a fixed location only, for

in-building use.

In order to comply with ISED RF Exposure require-

ments:

[French: An de se conformer aux exigences d’exposition

RF ISED:

1. The donor antenna must be installed to

provide at least 65 cm separation from

the human body at all times.

2. The server antenna must be installed to

provide at least 20 cm separation from

the human body at all times.

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is

subject to the following two con-ditions:

1. L’antenne du donneur doit être installée pour

fournir une séparation d’au moins 65 cm du

corps humain en tout temps.

2. L’antenne du serveur doit être installée pour

fournir une séparation d’au moins 20 cm du

corps humain en tout temps.

The Manufacturer’s rated output power of this equip-

ment is for single carrier operation. For situations

when multiple carrier signals are present, the rating

would have to be reduced by 3.5 dB, especially where

the output signal is re-radiated and can cause interfer-

ence to adjacent band users. This power reduction is

to be by means of input power or gain reduction and

not by an attenuator at the output of the device.

[FRENCH: La puissance de sortie nominale

indiquée par le fabricant pour cet appareil

concerne son fonctionnement avec porteuse

unique. Pour des appareils avec porteuses

multiples, on doit réduire la valeur nominale de 3,5dB,

surtout si le signal de sortie est retransmis et qu’il

peut causer du brouillage aux utilisateurs de bandes

adjacentes. Une telle réduction doit porter sur la

puissance d’entrée ou sur le gain, et ne doit pas se

faire au moyen d’un atténuateur raccordé à la sortie

du dispositif.]

1. This device may not cause interference.

2. This device must accept any interference,

in-cluding interference that may cause

undesired operation of the device.

[French: L’émetteur/récepteur exempt de licence

contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique

Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions

suivantes:

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage ra-

dioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionne-

ment.]

CAN ICES-3 (A)/NMB-3(A)

Compliance Contact

In the event of regulatory compliance issue, please

contact Nextivity Inc. directly. Contact information is

available at www.nextivityinc.com.

Patents

This product is covered by Nextivity, Inc., US patents

and patents pending. Please refer to cel-.com for

details.

Reproduction or media conversion by any means is

protected by copyright and may only occur with prior

written permission of Nextivity. Designed by Nextivity

in California.

Trademark

Cel-Fi and the Nextivity logo are trademarks of Nex-

tivity, Inc.

If you need help, visit: www.cel-.com/support.

ISED STATEMENT

WARNING: This is NOT a CONSUMER device. It is de-

signed for installation by an installer approved by an

ISED licensee. You MUST have an ISED LICENCE or

the express consent of an ISED licensee to operate

this device.

This device may operate in a fixed location only, for

in-building use.

In order to comply with ISED RF Exposure require-

ments:

[French: An de se conformer aux exigences d’exposition

RF ISED:

1. The donor antenna must be installed to

provide at least 65 cm separation from

the human body at all times.

2. The server antenna must be installed to

provide at least 20 cm separation from

the human body at all times.

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is

subject to the following two con-ditions:

CEL-FI SOLO RED 0.5W ERCES Public Operating instructions

Brand: CEL-FI

Model: SOLO RED 0.5W ERCES Public

Type: Operating instructions

This manual is also suitable for

Cel-Fi SOLO RED 0.5W ERCES Public

Download PDF

report

in other languages

français: CEL-FI SOLO RED 0.5W ERCES Public Mode d'emploi

CEL-FI SOLO RED 0.5W ERCES Public Operating instructions

This manual is also suitable for

CEL-FI SOLO RED 0.5W ERCES Public Operating instructions

in other languages

Related papers

Other documents