PARKIT360 B2 User manual

  • Hello, I'm your chat assistant. I've reviewed the provided user manual for a battery. The document outlines important procedures for using and charging the battery, including proper installation, voltage monitoring, and troubleshooting tips. It covers aspects like the volt meter display, charging indicators, and error codes. I'm ready to answer your questions about using this battery.
  • Where is the Volt Meter Display located?
    How should the battery be installed?
    What does the display show while charging?
    What is displayed when the battery is fully charged?
    What should I check if I get an ERR code?
BATTERY VOLTAGE & CHARGING
VOLT METER DISPLAY
Provides real-time Battery Voltage
Measurements during operation.
Located on the front panel.
CHARGING VOLTAGE
CHARGING AMPERAGE
BATTERY FULLY CHARGED
BATTERY INSTALLATION
Ensure battery is installed
on it’s side, with the terminals
facing the plug on the dolly:
All our batteries are Sealed, so theres
no risk of leakage in this position!
CHARGER DISPLAY
Shows Charge Level of Battery when
connected to a 120V power outlet.
While charging, the display alternates
between Charging Amperage and Voltage.
The battery graphic shows the % complete:
When charging is complete, FUL is
displayed and the battery graphic is
completely filled:
Get an Error Code? (ERR)
Check the terminal connections and dolly
plug to ensure they are properly connected.
Get a Repair Code?
You may have a faulty battery.
Please call us to order a replacement!
/