Page is loading ...
QUICK NOTE
*For Safety:
① Please ensure that the steering system and folding system are working properly, and the
components are tightly secured.
② Check whether the wheel axle is fastened to the body to ensure that the wheel can
rotate normally and the brake system can work normally.
③ Please check the tire pressure before riding. It is recommended that the tire pressure be
between 45-50psi.
④ Check the wear of the tires and brake pads.
⑤ Please wear the helmet and protectors well before riding.
*For New User(Limited Speed):
Consider the safety of the first ride, please bind the NIU e-scooter to the app and finish the
tutorial video firstly, and you need to ride it for a while (about 500 meters or 0.4 miles) to
unlock the max speed, or it will stay at a top 15mph limited speed.
*For Cruise Control: (The feature is unfortunately illegal in many countries, we have
considered adding this feature, but for now, you can use this feature as the methods bellow)
Android User:
You can download the app from this link:
https://www.pgyer.com/75575168c6a89e3f1220d46159bd2e0e?sig=Niv01yvmKlwIJzkf3AaR
yafJcIJw5gonGV43mfg%2F2qGfWx5KaEVj6S8K2NPsOGuL
Password: 123456
The correct version of the App with the function you’re looking for is 4.6.66 build 73. The
app on the store does not support this function.
IOS User:
Method 1:
Cruise control can be activated on the NIU KQi3 Pro eScooter (North America version) by
holding/maintaining the same speed for approximately 5+ seconds. An audible beep will
sound and you can release the throttle and cruise without any input. To deactivate, hit the
brakes or throttle again.
Method 2:
①You need a China mainland Apple ID and switched to that account for your
AppStore.(Either you have a China mainland phone number or google is your best friend.)
②Then open and search for NIU or “小牛电动" and install it, the interface is similar, you
need to register another account for this app, change the language to English and you have
both cruise control and non-zero start option to enable.
③After enabling it you can disconnect Bluetooth and reconnect to your us apple id and app,
enjoy your fully enabled scooter.
*Switch Riding Modes:
To switch between E-Save and Sport modes, press the power button once;
To activate the pedestrian mode, press the power button 5 times;
To create a custom mode, use the NIU app.
We hope the above solutions would help you start to ride our NIU KQi3 more easily and
quickly. If you have any concerns or questions, please reply to this email for immediate
assistance.
We will always be here to help. We also attached an “NIU KQi3 User Manuel” file for your
reference.
Sincerely,
NIU Amazon Team
/
