Connect one end of the HDMI cable to the receiver’s HDMI input.
Connect the other end to your TV’s HDMI input.
Plug one end of the power cord into the 12V DC input on
your receiver. Plug the other end into a standard power (wall) outlet.
Turn on your TV and switch to the correct input (HDMI).
You can change your input using the source/input button
on your TV or your TV’s remote control.
Install the batteries in your TDS TV+ remote control.
Using the TDS TV+ remote, follow the on-screen instructions to
complete setup. Have your Google account login handy for
a better TDS TV+ experience.
Visit TDS TV+ Topics in On Demand. The TDS TV+ viewing experience
is unlike traditional TV viewing. The short orientation video includes lots
of helpful information.
For additional support, call 1-833-440-3058 or visit tdstv.com/TVsetup.
1
2
3
4
5
6
TDS TV+ is a fully wireless experience, but it can be connected
via ethernet for maximum performance. To do so, connect one
end of an ethernet cable to the LAN port on your receiver and
the other end to your modem or router.
