Sony HT-X9000F Owner's manual

Type
Owner's manual

Sony HT-X9000F soundbar delivers powerful, cinematic surround audio with its 3.1 channel system, 35W output per channel, and the S-Force PRO virtual surround sound technology. It wirelessly connects to your compatible TV to bring you an immersive audio experience for your movies, shows, and music. The HT-X9000F supports Bluetooth, allowing you to stream your favorite music wirelessly from your smartphone or tablet. With its slim profile, you can easily mount it on the wall or place it on a shelf.

Sony HT-X9000F soundbar delivers powerful, cinematic surround audio with its 3.1 channel system, 35W output per channel, and the S-Force PRO virtual surround sound technology. It wirelessly connects to your compatible TV to bring you an immersive audio experience for your movies, shows, and music. The HT-X9000F supports Bluetooth, allowing you to stream your favorite music wirelessly from your smartphone or tablet. With its slim profile, you can easily mount it on the wall or place it on a shelf.

SERVICE MANUAL
Sony Video & Sound Products Inc.
Amplier section
(X9000F: US)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4ohms loads, both channels
driven, from 200 - 20,000Hz; rated
35W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250mW to
rated output.
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 100W
(per channel at 4ohms, 1kHz)
(X9000F: CND, AUS, EA, SP, TW, TH, LA/
XF9000)
POWER OUTPUT (rated)
Front L + Front R: 60W + 60W
(at 4ohms, 1kHz, 1% THD)
(X9000F: CH)
POWER OUTPUT (rated)
Front L + Front R: 60W + 60W
(at 4ohms, 1kHz)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 100W
(per channel at 4ohms, 1kHz)
Inputs
HDMI IN*
ANALOG IN
TV IN (OPT)
Outputs
HDMI OUT (TV (ARC))*
*HDMI IN and HDMI OUT (TV (ARC)) jacks
support HDCP 2.2 protocol. HDCP 2.2 is
newly enhanced copyright protection
technology that is used to protect
content such as 4K movies.
HDMI Section
Connector
Type A (19pin)
USB section
(USB) port:
Type A (For connecting USB memory)
BLUETOOTH section
Communication system
BLUETOOTH Specication version 4.2
Выходное напряжение:
(XF9000: RU)
Постоянный ток 5 В
Output
BLUETOOTH Specication Power
Class1
Maximum communication range
Line of sight approx. 30m 1)
Maximum number of devices to be
registered
9 devices
Frequency band
2.4 GHz band (2.4GHz - 2.4835GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH proles2)
A2DP (Advanced Audio Distribution
Prole)
AVRCP (Audio Video Remote Control
Prole)
Supported Codecs3)
SBC4), AAC5)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
32kHz, 44.1kHz, 48kHz)
(X9000F: CH)
1) The actual range will vary depending on
factors such as obstacles between
devices, magnetic elds around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2) BLUETOOTH standard proles indicate
the purpose of BLUETOOTH
communication between devices.
3) Codec: Audio signal compression and
conversion format
4) Abbreviation for Subband Codec
5) Abbreviation for Advanced Audio
Coding
Front L/Front R speaker block section
Speaker system
Full Range speaker system, Acoustic
suspension
Speaker
40mm × 100mm (1 5/8 in. × 4 in) cone
type
General
Power requirements
120 V AC, 60 Hz (X9000F: US, CND)
120 V AC, 50 Hz/60 Hz (X9000F: TW)
Power consumption
On: 38W
[Bluetooth Standby] - [On]: Less than
2W
[Bluetooth Standby] - [O]: Less than
0.5W
Dimensions* (approx.) (w/h/d)
930mm × 58mm × 85mm (36 5/8 in ×
2 3/8 in × 3 3/8 in)
*Not including projection portion
Mass (approx.)
2.5kg (5 33/64 lb)
Frequency band
2.4GHz (2.4000GHz - 2.4835GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Design and specications are subject to
change without notice.
Wireless Transmitter/
Receiver Section
220 V - 240 V AC, 50 Hz/60 Hz
(X9000F: AUS, CH, SP, TH/XF9000)
120 V - 240 V AC, 50 Hz/60 Hz
(X9000F: EA, LA)
What’s in the Box
Bar Speaker (1)
• Subwoofer (1)
Remote control (1)
R03 (size AAA) battery (2)
HDMI cable (supports the specication
equal to Premium High Speed HDMI
Cable with Ethernet) (1) (X9000F: US, CND,
AUS, CH, EA, SP, TW, TH, LA/XF9000: RU)
• Optical digital cable (1) (XF9000: AEP, UK)
WALL MOUNT TEMPLATE (1)
• Startup Guide
• Operating Instructions
(X9000F: CH)
HT-X9000F/XF9000
SA-X9000F/XF9000
SPECIFICATIONS
HT-X9000F/XF9000
SOUND BAR
SA-X9000F/XF9000
ACTIVE SPEAKER SYSTEM
9-896-483-02
2018C33-1
© 2018.03
US Model
Canadian Model
E Model
Australian Model
Chinese Model
HT-X9000F/SA-X9000F
AEP Model
UK Model
HT-XF9000/SA-XF9000
Ver. 1.1 2018.03
All of the units included in the HT-X9000F
(SA-X9000F/SA-WX9000F/Remote
control) or HT-XF9000 (SA-XF9000/SA-
WXF9000/Remote control) are required
to con rming operation of SA-X9000F/
XF9000. Check in advance that you have
all of the units.
COMPONENT MODEL NAME
HT-X9000F HT-XF9000
Bar Speaker (Active Speaker System) SA-X9000F SA-XF9000
Subwoofer (Active Subwoofer) SA-WX9000F SA-WXF9000
Please refer to service manual separately issued for Subwoofer.
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.
Photo: SA-X9000F
⌵⭨∃䋫
Ŭ31 eCn 濃FJSQ濄
⌵⭨∃䋫
Ŭ31 eCn 濃FJSQ濄
49
HT-X9000F/XF9000
SECTION 6
EXPLODED VIEWS
Note:
-XX and -X mean standardized parts, so
they may have some difference from the
original one.
Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
The mechanical parts with no reference
number in the exploded views are not sup-
plied.
Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
6-1. FOOT SECTION
front side
rear side
right side
left side
A
B
BA
#1
1
not supplied
not supplied
top cabinet section
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
1
#2
#2
#2
#2
#2
#2
#2
#2
#2
11
2
bottom cabinet section
top side
#1
#2 #2
front side
rear side
#2
– Bottom view –
left side
right side
2
1
1
1
1
The components identi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number speci ed.
Les composants identi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spéci é.
The components identi ed by mark 9 con-
tain con dential information.
Strictly follow the instructions whenever the
components are repaired and/or replaced.
Les composants identi és par la marque
9 contiennent des informations con den-
tielles.
Suivre scrupuleusement les instructions
chaque fois qu’un composant est remplacé
et / ou réparé.
Ver. 1.1
50
HT-X9000F/XF9000
6-2. TOP CABINET SECTION
front side
right side
top side
left side
C
C
#2
not supplied
51
SP1
SP2
#2
#2
#2
#2
#2
#2
#2
not supplied
FFC2
FFC1
#3
not supplied
#3
FP1
rear side
51
HT-X9000F/XF9000
6-3. BOTTOM CABINET SECTION
#3 #3
#3
#3
#3
#3
#3
#3
not supplied
101
102
AC1
top side
front side
rear side
right side
left side
D
D
E
E
#2
#2
#2
#2
#2
#2
#3
not supplied
(SK1-WS-CHUKEI board)
FFC3
MAIN board section
BT1
not supplied
not supplied
not supplied
not supplied
not supplied
not supplied
not supplied
not supplied
not supplied
not supplied
#2
#3
#3
#3
#3
#3
not supplied
ACP1
(SP for Hong Kong)
(See Note 2)
Note 1: When the bluetooth module (Ref. No. BT1) is replaced, be
sure to refer to “WIRELESS CONNECTION (LINK) WORK
OF BAR SPEAKER AND SUBWOOFER” on page 6.
Ver. 1.1
Note 2: Ref. No. ACP1 is a service part used only for the SP model
sold in Hong Kong.
52
HT-X9000F/XF9000
6-4. MAIN BOARD SECTION
rear side
top side
front side
left side
right side
HI
J
H
F
F
IJ
K
K
G
G
152
#3
#3
#3
#3
#3
#3
#3
#3
#4#4
#4
#4 #4
#4
not supplied
not supplied
not supplied
SK1 AMP board section
151
154 156
155
153
156
Note 1: The parts for repair of the radiation sheet
(Ref. No. 154, 155) are larger than the
radiation sheet before replacement.
When replacing the radiation sheet
(Ref. No. 154, 155), make sure to cut it
to the sizes below.
H
W
WRef. No.
H
8.0 8.0
14.0 14.0
unit: mm
154
155
152
Note 2: When the complete MAIN board (Ref. No. 153) is replaced,
be sure to refer to “SERIAL NUMBER WRITING WORK
WHEN THE MAIN BOARD REPLACED” on page 5.
(See Note 2)
Ver. 1.1
53
HT-X9000F/XF9000
6-5. SK1 AMP BOARD SECTION
rear side
top side
front side
left side
right side
L
L
Note 1: The parts for repair of the radiation sheet
(Ref. No. 201) is larger than the radiation
sheet before replacement.
When replacing the radiation sheet
(Ref. No. 201), make sure to cut it to the
sizes below.
H
W
WRef. No.
H
14.0 10.0
unit: mm
201
201
not supplied
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#2
#2
not supplied
(SK1-JACK board)
not supplied
not supplied
not supplied
not supplied
POWER board section
FFC4
202
201
201
201
not supplied
203
204
Note 2: When the complete SK1 AMP board (Ref. No. 202) is re-
placed, spread the compound to the touching portion between
the IC6006 and the heat sink.
54
HT-X9000F/XF9000
6-6. POWER BOARD SECTION
rear side
top side
right side
left side
front side
#3
#3
#3
#3
251
not supplied
not supplied
not
supplied
not supplied
not supplied
not supplied
not
supplied
not supplied
not supplied
not supplied
not supplied
Ver. 1.1
HT-X9000F/XF9000
5757
Ver. 1.1
501
Remote control (1)
502
Optical digital cable (1)
503
HDMI cable (supports the specification equal to Premium
High Speed HDMI cable with Ethernet) (1)
504
AC plug adaptor (2)
(X9000F)
(XF9000: RU)
(XF9000: AEP, UK)
(X9000F: LA)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Sony HT-X9000F Owner's manual

Type
Owner's manual

Sony HT-X9000F soundbar delivers powerful, cinematic surround audio with its 3.1 channel system, 35W output per channel, and the S-Force PRO virtual surround sound technology. It wirelessly connects to your compatible TV to bring you an immersive audio experience for your movies, shows, and music. The HT-X9000F supports Bluetooth, allowing you to stream your favorite music wirelessly from your smartphone or tablet. With its slim profile, you can easily mount it on the wall or place it on a shelf.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages