Argo FAN HEATER is a versatile heating solution designed to provide warmth and comfort in various settings. With its adjustable thermostat, you can set the desired room temperature, and the device will automatically maintain it, ensuring a consistent level of warmth. It features multiple modes, including cold ventilation, ECO mode for energy-efficient heating, and COMFORT mode for maximum heat output. The overheating safety device ensures safe operation by automatically switching off the heater in case of excessive heat buildup.
Argo FAN HEATER is a versatile heating solution designed to provide warmth and comfort in various settings. With its adjustable thermostat, you can set the desired room temperature, and the device will automatically maintain it, ensuring a consistent level of warmth. It features multiple modes, including cold ventilation, ECO mode for energy-efficient heating, and COMFORT mode for maximum heat output. The overheating safety device ensures safe operation by automatically switching off the heater in case of excessive heat buildup.
V 05/22
DORI
ICE - BERRY - MINT - NIGHT
FAN HEATER WITH WIRE-WOUND HEATING ELEMENT
This product is only suitable for well
insulated spaces or occasional use.
OPERATING INSTRUCTIONS
Read the instructions carefully before installing and operating the appliance or performing maintenance
operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/
or damages. Store these instructions for future reference.
EN
11V 05/22
•Use this convector only as outlined in this manual. Any other use not
recommended by the manufacturer may cause re, electric shock or
injury to persons.
•Ensure that the mains power complies with the voltage specied on the
fan heater data plate (220-240V~50-60 Hz).
•This appliance can be used by children aged from 8 years and above
and people with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
• Children shall not play with the appliance.
•Cleaning and user maintenance shall not be made by children without
supervision.
•This product is not a toy. Children of less than 3 years should be kept
away unless continuously supervised.
•Children aged from 3 and less than 8 years shall only switch on/
off the appliance provided that it has been placed or installed in its
intended normal operating position and they have been given instruction
concerning use of the appliance in a safe way and understand the
hazards involved.
•Children aged from 3 years and les than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
CAUTION: Some parts of this product can become very hot and
cause burns. Particular attention has to be given where children and
vulnerable people are present.
WARNING: In order to avoid hazard due to inadvertent resetting of
the thermal cut-out, this appliance must not be supplied through and
external switching device, such as a timer, or connected to a circuit that
is regularly switched on and off by the utility.
WARNING: do not use the fan heater with a controller or any other
external device that activates the appliance automatically, as there may
be a risk of re if the fan heater is covered or incorrectly positioned.
• Do not restrict the air inlet and outlet grilles.
•The appliance heats up slightly when in use. In order to avoid burns,
do not let bare skin touch hot surfaces.
GENERAL SAFETY INFORMATION
12V 05/22
• Ensure that all objects are at least 1 meter from the front and sides of
the appliance.
• Disconnect the mains power when the appliance is not used or for
cleaning operations.
• Avoid using the fan heater in dusty environments or in the presence of
inammable vapors (e.g. in workshops or garages) or paint vapors.
• Do not place anything on the appliance, do not use the appliance to
dry clothing.
• Use the appliance in a well-ventilated area.
• Avoid placing ngers or foreign objects in the air inlet/outlet grilles, as
this may lead to electric shock or re and may damage the appliance.
• To avoid the risk of re, do not block the grilles or tamper with them in
any way while the fan heater operates.
• Do not use the appliance if the cord or plug are damaged. If the power
supply cord is damaged, it must be replaced by the manufacturer,
dealer or a similarly qualied person so as to avoid any safety risks.
• Do not operate the appliance if it has fallen from a height or has
suffered damage in any way. Contact qualied technical personnel to
examine the appliance or perform any electrical or mechanical repairs.
• The most common cause of overheating is the build-up of dust in the
appliance. Remove dust deposits by unplugging the appliance and
cleaning the air outlets and grilles with the aid of a vacuum cleaner.
• Do not use abrasive detergents for cleaning this appliance. Clean the
appliance with the aid of a damp (not wet) cloth rinsed in hot soapy
water. Always remove the plug from the mains socket before cleaning.
• To disconnect the fan heater, push the switch to OFF and remove the
plug from the socket. Pull on the plug only. Avoid pulling on the cord
when disconnecting the fan heater.
• Do not place any objects on the cord and do not bend it.
• It is not advisable to use extension cords, as these may overheat
• and cause the risk of re. Do not use a single extension cord to operate
multiple appliances.
• Do not immerse the cord, plug or any other element of the appliance in
water or other liquids.
• Do not touch the plug with wet hands.
• Do not place the fan heater above or near another heat source.
13V 05/22
WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT
FROM OVERHEATING.
The symbol below signals the above warning:
• The fan heater may cause the risk of re if, while in operation, is covered
by or comes into contact with inammable material including curtains,
drapery, blankets, etc. KEEP THE FAN HEATER AWAY FROM THESE
MATERIALS, WITH A MINIMUM DISTANCE OF 1 M FROM THE AIR
OUTLET.
• Do not connect the appliance to the mains power before it has been
properly assembled and positioned.
• Do not run the cord under carpets. Do not cover the cord with blankets,
carpets or similar materials. Place the cord far away from busy areas or
where it cannot be accidentally pulled-out.
• Do not operate the fan heater in close proximity to bathtubs, showers,
washbasins or swimming pool.
• Do not position the fan heater below a socket outlet.
• Do not operate the appliance outdoors. Upon initial start-up, the fan
heater may emit a slight, harmless smell. This smell is a normal effect of
the initial heating up of the internal heating elements, and should not
recur later on.
WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH
AS THE SOLE MEANS OF DISCONNECTING POWER. WHEN
SERVICING OR MOVING THE FAN HEATER, ALWAYS UNPLUG THE
POWER CORD.
• A fan heater has hot and arcing or sparkling parts inside. It must not be
used in potentially dangerous locations such as ammable, explosive,
chemical-laden or wet atmosphere.
• Do not place the fan heater on soft surfaces, like a bed, where openings
may become blocked. Always place the fan heater on a stable, at,
level surface when operating, to avoid the chance of the fan heater
overturning. Locate the power cord so the fan heater or other objects
are not resting on it.
• Always unplug the fan heater when not in use.
• In order to avoid accidents turn unit off if unattended.
• In the event of any problems (abnormal noise or a strange smell) switch
14V 05/22
DESCRIPTION OF PARTS
3
1
24
5
6
1. Front part
2. On/off and selection knob
3. Indicator light
4. Thermostat knob
5. Handle
6. Rear part
off the appliance immediately, do not attempt to repair it and take it to
your local after sales service.
• Do not store away until the fan heater cools down, store the appliance
in cool dry location, when not in use.
• Do not use if there are visible signs of damage on the appliance.
• WARNING: Do not use this fan heater in small rooms when they are
occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
• Use this fanheater on a horizontal and stable surface,or x it to the wall,
as applicable.
15V 05/22
Put the fan heater vertically on a at and stable surface. Connect the power cord to a suitable electric socket (220-
240V~/50-60 Hz). Turn the thermostat knob clockwise to the maximum position.
Turn on the On/off and selection knob and select one of the possible positions:
Cold ventilation , ECO mode ( ) (1000W) or COMFORT mode ( ) (2000 W).
HOW TO USE THE FAN HEATER
Thermostat knob:
Minimum position
Maximum position
Function knob:
= On/Off
= Cold air
= ECO 1000W
= COMFORT 2000W
The thermostat maintains the desired room temperature by automatically switching on/off the fan heater. As you
rotate the knob clockwise, the room temperature increases. Operate the unit until the room reaches a comfortable
temperature, then turn the knob thermostat knob counter-clockwise until you hear a “click” and the unit will shut down;
then turn again slightly (just a little) the thermostat knob clockwise, in this position the thermostat will maintain the
temperature you have chosen. At this point, the product will automatically restart when the temperature in the room
goes down below the set limit.
To use the heater continuously, not controlled by the thermostat, turn the thermostat knob up the the maximum position.
The appliance is tted with an anti tip-up device that prevents it from operating when it detects that the product is
inclined. Do not position the appliance on its side or upside down.
16V 05/22
CAUTION: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE OPERATIONS.
IMPORTANT: DO NOT IMMERSE THE CERAMIC FAN HEATER IN WATER
Cleaning the outside surface of the appliance
Turn the switch off and unplug before carrying out any maintenance work or moving the appliance. Use a soft cloth to
remove any dust from the fan heater. If the fan heater is excessively dirty, use a soft cloth moistened with water and a
mild detergent at a temperature lower than 50 °C. Let the fan heater dry completely before use. Do not use corrosive
detergents or solvents such as petrol. Do not wash the appliance with water. Do not use oils, chemical substances or
other items to clean that may damage the surface. Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
STORAGE
If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging,
in a cool and dry place.
MAINTENANCE AND STORAGE
In case of overheating the safety cut out protecting the heating element will automatically switch off the appliance. If
this happens:
• switch off the fan heater;
• remove the causes of abnormal operation or overheating (i.e. obstacles in front of air inlet or air outlet grille);
• leave the heater cool down for 15/20 minutes;
• switch on again the fan heater.
OVERHEATING SAFETY DEVICE
17V 05/22
Model identier(s): DORI ICE - DORI BERRY - DORI MINT - DORI NIGHT
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local space
Heaters only (select one)
Nominal heat output Pnom 1,8-2,0 kW Manual heat charge control, with integrated
thermostat [no]
Minimum heat output
(indicative) Pmin 0,9 kW Manual heat charge control with room and/or
outdoor temperature feedback [no]
Maximum continuous heat
output Pmax,c 2,0 kW Electronic heat charge control with room and/or
outdoor temperature feedback [no]
Auxiliary electricity
consumption Fan assisted heat output [no]
At nominal heat output elmax N/A kW Type of heat output/room temperature control (select one)
At minimum heat output elmin N/A kW Single stage heat output and no room temperature
control [no]
In standby mode elsb 0kW Two or more manual stages, no room temperature
control [no]
With mechanic thermostat room temperature
control [yes]
With electronic room temperature control [no]
Electronic room temperature control plus day timer [no]
Electronic room temperature control plus week
timer [no]
Other control options (multiple selections possible)
Room temperature control, with presence detection [no]
Room temperature control, with open window
detection [no]
With distance control option [no]
With adaptive start control [no]
With working time limitation [no]
With black bulb sensor [no]
Contact details: ARGOCLIMA SPA - Via A. Varo,35 - Alanello (BS) - ITALY - www.argoclima.com
INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS
Tabel 2 - Annex II - Ecodesign requirements - Requirements for product information - COMMISSION REGULATION
(EU) 2015/1188 of 28 April 2015 implementing Directive 2009/125/EC of the European Parliament and of the
Council with regard to ecodesign requirements for local space heaters.
18V 05/22
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE
EUROPEAN DIRECTIVE 2012/19/EU
At the end of its working life this equipment must not be disposed of as an household waste. It must be
taken to special local community waste collection centres or to a dealer providing this service. Disposing
of electrical and electronic equipment separately avoids possible negative effects on the environment and
human health deriving from an inappropriate disposal and enables its components to be recovered and
recycled to obtain signicant savings in energy and resources. In order to underline the duty to dispose of
this equipment separately, the product is marked with a crossed-out dustbin.
www.argoclima.com
Argoclima assumes no responsibility for any errors or inaccuracies in the content of this manual and reserves the right to make any changes to this
manual at any time and without notice, deemed appropriate for any technical or commercial need.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Argo FAN HEATER is a versatile heating solution designed to provide warmth and comfort in various settings. With its adjustable thermostat, you can set the desired room temperature, and the device will automatically maintain it, ensuring a consistent level of warmth. It features multiple modes, including cold ventilation, ECO mode for energy-efficient heating, and COMFORT mode for maximum heat output. The overheating safety device ensures safe operation by automatically switching off the heater in case of excessive heat buildup.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Moory BH-20D User manual
-
RAMTONS RM/475 User manual
-
Argoclima Pop Ice Operating instructions
-
-
-
Pro Breeze PB-H07-UK-FBA User manual
-
Argoclima Splitto Installation guide
-
HAEGER Fan heater Versatile User manual
-
United UHC-886 Operating instructions
-
Mellerware 02000W User manual
