aLora CH316008 User manual

Brand
aLora
Model
CH316008
Type
User manual

aLora CH316008 is a versatile chandelier that combines style with functionality. Designed for indoor use, it provides ample lighting for various spaces. Installation requires caution and should be handled by a licensed electrician. The fixture supports multiple lamp types and wattages as specified on the socket label. It features a canopy and mounting crossbar for secure attachment to the ceiling. The adjustable rod assembly allows you to customize the hanging height. Once installed, the chandelier adds a touch of elegance to any room while providing bright and beautiful illumination.

aLora CH316008 is a versatile chandelier that combines style with functionality. Designed for indoor use, it provides ample lighting for various spaces. Installation requires caution and should be handled by a licensed electrician. The fixture supports multiple lamp types and wattages as specified on the socket label. It features a canopy and mounting crossbar for secure attachment to the ceiling. The adjustable rod assembly allows you to customize the hanging height. Once installed, the chandelier adds a touch of elegance to any room while providing bright and beautiful illumination.

CH316008
Chandelier
NOTICE
• The important safeguards and instructions outlined in this sheet cannot cover
all possible conditions and situations that may occur. It must be understood
that caution and certain care factors must be followed. These instructions are
provided for your safety and we highly recommend that a licensed, trained
electrician install this unit.
• This fixture is designed to be mounted on a correctly installed standard round
or octagon box OR through a wiring box with a plaster frame. The box must be
securely mounted to the structure of the building. The crossbar and hardware
supplied should be used, directly mounting the fixture to the outlet box may
make it impossible to correctly align the fixture.
Important: ALWAYS be sure to disconnect power before re-lamping or wiring the fixture. Read these instructions completely before starting installation.
To avoid the risk of fire and/or shock fixture must be installed in compliance to national and local electrical and building codes.
If an existing fixture is being replaced take special notice of which wires were connected in the outlet box.
DO NOT SEPARATE ANY WIRES THAT MAY BE EXISITING IN THE JUNCTION BOX
DO NOT DAMAGE THE INSULATION OF JUNCTION BOX WIRES.
In Regular circumstances the BLACK wire will be “live”, WHITE will be “neutral” and GREEN or BARE COPPER will be “ground”. In older buildings it is always good practice to
reconfirm the polarity of the wiring.
ASSEMBLY INSTRUCTIONS
CANADA : 102 ∙19028 27TH Ave. - Surrey, BC V3Z 5T1
USA : 3035 E. Lone Mountain Rd - Las Vegas, NV, 89081
www.aloralighting.com
P.
1.833.MY ALORA (692.5672)
WARNINGS AND CAUTIONS
TECHNICAL SUPPORT
1.833.MY ALORA(692.5672)
technicalsupport@aloralighting.com
1a.
1b.
1c.
1d.
2a.
2b.
2c.
1e.
1f.
1g.
3c.
3b.
3a.
Step 1
Step 2
You are now ready to enjoy your fixture.
Cut down the extra wire and slide through mounting crossbar. Connect fixture
wires to junction box wires using the marrettes provided (1b). (white to white
“N”, black to black “L”, green to green “G”). Slide canopy (2a) and mounting
collar (2b) towards ceiling and thread on the mounting collar nuts to the
canopy pivots (1f). This will secure the canopy to mounting crossbar and
ceiling.
Remove the mounting crossbar (1d) from within the canopy (2a) by loosening
the mounting collar (2b). Attach the mounting crossbar (1d) to junction box
(1a), using two junction box screws (1f) (not provided). *For additional
support install anchor screws (1c) through crossbar into ceiling and thread on
the supplied finishing nuts (1e)*. Determine the desired length the fixture will
hang by selecting from the assorted rod sizes supplied (2c). Slide selected
rods through the fixture wires and thread the rod assembly to fixture body
(3a). Next, Slide the mounting collar (2b) followed by canopy (2a) through
wire and rods and thread on the fixture pivots (1g) (figure 1).
Step 3
Install recommended lamps (3c) (not provided) (referred on the socket label
for maximum wattage and type) to fixture sockets (3b). Secure the glass
shades by placing them over lamps (3d) and securing in the shade holders
(3b). Finally restore power. *If fixture has integrated LED (Lighting Emitting
Diodes) lamp installation is not required*
Figure 1
  • Page 1 1

aLora CH316008 User manual

Brand
aLora
Model
CH316008
Type
User manual

aLora CH316008 is a versatile chandelier that combines style with functionality. Designed for indoor use, it provides ample lighting for various spaces. Installation requires caution and should be handled by a licensed electrician. The fixture supports multiple lamp types and wattages as specified on the socket label. It features a canopy and mounting crossbar for secure attachment to the ceiling. The adjustable rod assembly allows you to customize the hanging height. Once installed, the chandelier adds a touch of elegance to any room while providing bright and beautiful illumination.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents