PAGE 1 OF 2
SENKO TASK LIGHT
Installation Instructions
Innovative Ergonomic Solutions
800 524 2744
customerservice@team-ies.com
team-ies.com
HAT Collective
408 437 8770
cs@hatcollective.com
hatcollective.com
SENKO-1-X
© 2022 Innovative Ergonomic Solutions REV B
PAGE 2 OF 2
Power Supply
Connect the power adapter
to the lamp and to a
120V / 60Hz wall outlet.
Dimmer Switch
1st tap – Turn on
2nd tap – Brighter
3rd tap – Max. Brightness
4th tap – Turn o
iSAFETY ADVICE
• Parts of the lamp may become
hot during use. Do not touch the
light bulb or parts surrounded by
the light bulb (for example glass or
reector) while in use.
• Never try to take o the LED bulb
by yourself, the LED part is not
replaceable.
• The external exible cable (power
supply) for this lamp cannot be
replaced. If the cable is damaged,
the lamp must be scrapped.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAN ICES-5(B)NMB-5(B)
Innovative Oce Products, LLC
100 Kuebler Road
Easton, PA 18040
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Innovative FlexMount 8318 User manual
-
-
Innovative 8318 User manual
-
HAT COLLECTIVE 7000 User manual
-
ERGODIRECT CHG-CAP User manual
-
Innovative 7000 User manual
-
Innovative 8524 User manual
-
Innovative WINSTON-E User manual
-
ERGODIRECT STX-02S User manual
-
HAT COLLECTIVE FLEXMOUNT 8111 User manual