DATA SHEET
0" Professional Freestanding Range - Induction
INDICATES CAVITY CLEARANCES ---------------
INDICATES PRODUCT DATUM --------------------
DATE: 14.07.2020
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
29 7/8"
B
29 1/8"
f
5 /4" -
6 /4"
o
m
FRONT VIEW
PLAN VIEW
PROFILE VIEW
k
c
n
i
t
a
hj
p
D
e
q
l
Model no:
RIV3-304
(refer page 4 for metric measurements)
Product Dimensions
a Height of range (from floor to cooktop, excluding grates and
rear trim)
B Overall width of range
c Overall depth of range (excluding handle and dials)
d Depth from rear of chassis to cabinetry face - projecting
e Depth from rear of chassis to cabinetry face - flush
f Height of rear trim
g Depth of rear trim
h Height from countertop to bottom of control panel
i Height from countertop to top of door
j Height from countertop to centre of handle
k Height from countertop to bottom of door
l Height from countertop to top of lower panel
m Height from countertop to bottom of lower panel
n Thickness of handle (not including standoffs)
o Width of handle (including standoffs)
p Depth of handle (measured from front of door)
q Depth of front of cooktop to control panel
r Height of cooktop front face
s Height from top of cooktop to control panel
t Depth of open door to cabinetry face - flush
u Adjustable feet height
Cavity Dimensions
Overall width of cavity
Overall depth of cavity for projecting control panel
Overall depth of cavity for flush control panel
Maximum height of from floor to countertop
- for level counter
- with range levelling legs fully extended Overall height of cavity
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
s
g
r
t
DATUM : FLOOR
DATUM :
TOP OF
COUNTERTOP
CABINET FACE FOR INSTALLATION
WITH PROJECTING CONTROL PANEL
CABINET FACE FOR INSTALLATION
WITH FLUSH CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
PROJECTING CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
FLUSH CONTROL PANEL
29 1/8"
c
29 7/8"
B
u
0 5 10 20
inches