Littfinski DatenTechnik 000135 User guide

Brand: Littfinski DatenTechnik

Model: 000135

Type: User guide

Littfinski DatenTechnik 000135 provides stabilized digital track currency for model railways in various voltage options ranging from 15 to 24 volts. It seamlessly connects to the DigitalBooster DB-4 via the included 5.5X2.1mm output plug, ensuring a reliable power supply for your digital train system.

ittfinski

aten

echnik (

LDT

)

Operating Instruction

Switching Power Supply for

the DigitalBooster DB-4

from the Digital-Professional-Series !

DB-4-Power Supply

Part-No.:

000135

For the supply of the DigitalBooster DB-4 with

stabilized digital track currency of 15, 16, 18,

19, 20, 22 and 24 Volt.

This product is not a toy! Not suitable for children under 14 years of age! The kit

contains small parts, which should be kept away from children under 3 years of

age! Improper use will imply danger of injuring due to sharp edges and tips! Please

store this instruction carefully.

Introduction / Safety Information:

You have purchased the Switching Power Supply for the

DigitalBooster DB-4 for your digital model railway.

The DB-4-PowerSupply is a high quality product which is

supplied within the assortment of Littfinski DatenTechnik (LDT).

We are wishing you having a good time using this product.

The Power Supply comes with 24 month warranty.

• Please read the following instructions carefully. Warranty will

expire due to damages caused by disregarding the operating

instructions. LDT will also not be liable for any consequential

damage caused by improper use or installation.

• We designed our devices for indoor use only.

• Attention: Please switch off your model railway by

disconnecting the transformers and switching Power

Supply from AC-current before starting any installation.

Connection to Mains:

The DB-4-PowerSupply is suitable for the operation on mains

voltage of 110 to 240 VAC and a frequency of 50 to 60 Hertz.

Each DB-4-PowerSupply will be supplied together with a

mains supply cable which has an Euro- and a small-device

plug.

Connect the small device plug to the suitable small device

socket at the DB-4-PowerSupply.

Connection to the DigitalBooster DB-4:

The DB-4-PowerSupply will be supplied together with several

output plugs. Please select the plug 5.5X2.1mm.

This plug has an outside diameter of 5.5mm and a bore

diameter of 2.1mm.

The negative pole is outside and the positive pole is inside.

Now connect the output plug 5.5X2.1 to the socket of the

output cable and then the output plug to the socket BU1 of

the DigitalBooster DB-4, as shown at the following

illustration.

DB-4

Rev. 1.4

KL3KL4

KL2

STOP/GO

EDC

BU2

BU3

ST2ST1

IN OUT

Feedback

JP5

2,5 4,5

ShortReport

RailCom

GoAuto

ON OFF

JP4

JP3

JP2

JP1

MMDCC

BU1

Littfinski DatenTechnik (LDT)

STOPGO

LED2LED1

red brown

Multi-Digital

DigitalBooster

DB-4

2,5 / 4,5 Ampere Booster für die Digitalformate Märklin-

Motorola, mfx®, M4 und DCC.

2,5 / 4,5 ampere booster for Märklin-Motorola, mfx®, M4

and DCC.

www.ldt-infocenter.com

Littfinski DatenTechnik (LDT)

Digital-Profi werden!

Vom DB-4-Power-Supply

From DB-4-Power-Supply

Adjusting the Digital Voltage:

Adjust the voltage selection switch of the output cable of the

DB-4-PowerSupply by use of the attached key or a suitable

screw driver to a voltage between 15 and 24 Volt.

This voltage corresponds to the digital-voltage which the

DigitalBooster DB-4 will supply to the rail.

Made in China

Littfinski DatenTechnik (LDT)

Bühler electronic GmbH

Ulmenstraße 43

15370 Fredersdorf / Germany

Phone: +49 (0) 33439 / 867-0

Internet: www.ldt-infocenter.com

Instruction for the Switched-Mode Power Supply MWA2103GS

Subject to technical changes and errors.  09/2022 by LDT

Littfinski DatenTechnik 000135 User guide

Littfinski DatenTechnik 000135 User guide

Littfinski DatenTechnik 000135 User guide

Related papers

Other documents