2. Joovv
  3. 1155

Joovv 1155 User guide

  • Hello! I've reviewed the Joovv Hardwire Pairing Kit Quickstart Guide, which covers how to set up multiple Joovv devices using the pairing kit. The document describes how to reset devices, establish a lead device, and enable automatic pairing with a session timer. I'm ready to answer your questions about this process.
  • How to reset a device?
    How to set the device to follow mode?
    How to set a lead device?
Hardwire Pairing Kit
Quickstart Guide
2JOOVV HARDWIRE PAIRING KIT QUICKSTART GUIDE
Hardwire Pairing Kit
Multiple Device Setup
Half Max, Duo, Max, Quad, Elite
To pair your Multiple Device Setup using Pairing Cable Kit follow the
steps listed below.
Reset All Devices
Step 1
After applying power to the device using the main AC
power cord, reset device by pressing and holding the
Power and Light Mode buttons together for 4 seconds.
Step 2
Press the Power button twice or until the display reads
FOLL.
Step 3
Press and hold the Power button for 4 seconds to
confirm.
Unplug the power cord and leave the device in this
state. The next time the device receives power it will
search for the Lead device.
Repeat steps 1-3 for each device before continuing.
Cleared Message Device Ready to FollowFollow Mode Message Follow Mode Message
Step 1
Hold for 4 seconds
Step 2
Press twice or until
FOLL is displayed
Step 3
Hold for 4 seconds
Ready to Pair
3JOOVV HARDWIRE PAIRING KIT QUICKSTART GUIDE
Pairing Cable Kit steps for Multiple Device Setup
Assemble Joovv
Step 4
Assemble and mount devices then connect AC patch
cables, main AC power cord, and hardwire pairing cables
following the Wire Diagram section on pages 29-32 of the
User Manual.
Set Lead Device
Step 5
Locate the Lead device control panel (Example Joovv
Quad shown). Press and hold the Power and Light Mode
buttons for 4 seconds to clear the device mode.
Step 6
Press the Power button once or until the display reads
LEAD.
Step 7
Press and hold the Power button for 4 seconds to
confirm. Devices will automatically pair and the Lead
control panel will display the 10:00 minute session timer.
The Lead device is now the controllable device for the
configuration.
Great job! You’re now ready to start Joovvin’!
Cleared Message Device Ready to LeadLead Mode Message Lead Mode Message
Step 5
Hold for 4 seconds
Step 6
Press once or until
LEAD is displayed.
Step 7
Hold for 4 seconds
Ready to Use
Example Joovv Quad
conguration.
Pairing steps apply
to all multiple device
congurations.
Lead
Control
Panel
Follow
Follow Follow
Lead
4JOOVV HARDWIRE PAIRING KIT QUICKSTART GUIDE
LEAD
AC OUT AC IN
P1 P2
FOLLOW
AC OUT AC IN
P1 P2
AC OUT AC IN
P1 P2
FOLLOW
LEAD
P1 P2
AC OUT AC IN
Device Congurations
Joovv Duo 3.0Joovv Half Max 3.0
with pairing cables displayed
5JOOVV HARDWIRE PAIRING KIT QUICKSTART GUIDE
AC OUT AC IN
P1 P2
FOLLOW
LEAD
P1 P2
AC OUT AC IN
AC OUT AC IN
P1 P2
FOLLOW
FOLLOW
P1 P2
AC OUT AC IN
The Horizontal Duo configuration is an alternative setup option
and requires an additional accessory kit. Please reach out to
help@joovv.com for more information.
i
LEAD
AC OUT AC IN
P1 P2
AC OUT AC IN
P1 P2
FOLLOW
Device Congurations
Joovv Max 3.0Joovv Duo 3.0(horizontal)
with pairing cables displayed
6JOOVV HARDWIRE PAIRING KIT QUICKSTART GUIDE
FOLLOWFOLLOW
FOLLOWFOLLOW
FOLLOW
LEAD
AC OUT AC IN
P1 P2
AC OUT AC IN
P1 P2
AC OUT AC IN
P1 P2
AC OUT AC IN
P1 P2
AC OUT AC IN
P1 P2
AC OUT AC IN
P1 P2
LEAD
AC OUT AC IN
P1 P2
FOLLOW
AC OUT AC IN
P1 P2
AC OUT AC IN
P1 P2
FOLLOW
FOLLOW
AC OUT AC IN
P1 P2
Device Congurations
Joovv Quad 3.0 Joovv Elite 3.0
with pairing cables displayed
7JOOVV PAIRING CABLE QUICKSTART GUIDE
JV-MKT-DOC-3523 VER.2
joovv.com
Revision History
Date Revision # Description of Changes
December 2020 JV-MKT-DOC-3523 (Ver.0) Ver.0 Release to market
March 2021 JV-MKT-DOC-3523 (Ver.1) Ver.1 Updated Page 2 Illustration
April 2021 JV-MKT-DOC-3523 (Ver.2) Updated text/images
/