2. 1mii
  3. B10
B10

1mii B10 User guide

  • Hello! I've reviewed the B10 Bluetooth audio adapter user guide. This document explains how to pair your device with computers and other audio devices. It also covers microphone usage, connecting multiple headphones, and support for various operating systems. I'm available to answer any questions you may have about setting up or using your adapter.
  • How do I enter pairing mode?
    How do I use the microphone?
    How do I connect two Bluetooth headphones?
    What does a stay green LED indicator mean?
B10 User Guide
Get paired with your PC/Mac
1.Plug B10 into USB port on your PC/Mac.
2.Press and hold the multi-function button on B10 for 2~3 seconds to enter paring mode
the LED indicator will alternatively flashes blue and red.
3.Please ensure your Bluetooth headphone in paring mode.
4.Get your Bluetooth headphone close to B10 audio adapter to complete paring(the LED
indicator will stay on).
Use Microphone on your Bluetooth headphone
Double click the multi-function button on B10 to ENTER the "Hands free/Call mode(the
LED indicator start pulsing blue every 3 seconds)" to use the Microphone. After using
the Microphone, please double click the multi-function button to EXIT the"Hands free/Call
mode".(Note:Hands Free/call mode DOES NOT SUPPORT aptX LL & HD)
How to connect two Bluetooth headphones via B10?
1.Plug B10 into USB2.0 or USB3.0 port on your PC/Mac.
2.Press and hold the multi-function button on B10 for2~3 seconds to enter paring mode
the LED indicator will alternatively flashes blue and red.
3.Please ensure your Bluetooth headphone in paring mode.
4.Get your Bluetooth headphone close to B10 audio adapter to complete paring(the LED
indicator will stay on).
5.Ensure your second Bluetooth headphone in paring mode.
6.Press and hold the multi-function button on B10 for2~3 seconds to enter paring mode
the LED indicator will alternatively flashes blue and red.
7.Get your second Bluetooth headphone close to B10 audio adapter to complete
paring(the LED indicator will stay on).
Status
LED indicator
Pairing mode
LED alternatively flash blue and red
Connected with aptX-
HD codec
LED stay green
Connected with aptX-
LL codec
LED stay white
Connected with aptX-
codec
LED stay cyan
Connected with fast
stream codec
LED stay yellow
Connected with SBC
LED stay blue
Disconnected
LED flash once every 3 seconds
Connected 2 devices
LED stay purple
Call mode
LED indicator pulse Blue every 3 seconds
Settings on your Operating Systems
On macOS:
1.Open System Preferences > Sound
2.Output, Choose “B10 USB”.
3.Input, Choose ”B10 USB”(Note: If you need to use the microphone on your Bluetooth
headphone, please follow below steps)
4.Double click the multi-function button on B10 to enter the "Hands free/Call mode(the
LED indicator start pulsing blue every 3 seconds)" to use the Microphone. After using
the Microphone, please double click the multi-function button to EXIT the"Hands free/Call
mode".
Warning: VOIP call mode does NOT support aptX and aptX LL!!! Please EXIT VOIP
CALL MODE AFTER USING THE MICROPHONE !!!
For Skype on macOS:
1. Open Skype, go “Settings”
2. Audio & Video > Speakers> Choose”B10”
3.Microphone>Choose”B10” Double click the multi-function button on B10 to enter the
"Hands free/Call mode(the LED indicator start pulsing blue every 3 seconds)" to use the
Microphone.
Warning: VOIP call mode does NOT support aptX and aptX LL!!! Please EXIT VOIP
CALL MODE AFTER USING THE MICROPHONE !!!
How to connect your Airpods(First Generation) with B10?
1.Plug B10 into USB2.0 or USB3.0 port on your Mac.
2.Press and hold the multi-function button on B10 for2~3 seconds to enter paring mode
the LED indicator will alternatively flashes blue and red.
3.Put your Airpods in the case and open the lid, press and hold the button on the back of
the case until you see the status light start pulsing white,then let go.
4.Please go: System preferences>Sound>Output,please select B10 USB as the sound
output device> Input,please select B10 USB as the sound input device.
5.If you need to use the Microphone on your Airpods, Please double click the
multi-function button on B10 to enter the "Hands free/Call mode(the LED indicator start
pulsing blue every 3 seconds)" to use the Microphone.
Warning: VOIP call mode does NOT support aptX and aptX LL!!! Please EXIT VOIP
CALL MODE AFTER USING THE MICROPHONE !!!
B10 On Windows 7 PC
1.Right Click “Speakers” icon,choose”Playback Devices”
2.Choose”Speakers B10” Right click “Set as Default Device”
3.Choose “Recording”tab, click”B10” Right Click “Set as Default Device”(Note: If you need
to use the microphone on your Bluetooth headphone, please follow below steps)
4.Double click the multi-function button on B10 to enter the "Hands free/Call mode(the
LED indicator pulsing blue every 3 seconds)" to use the Microphone. After using the
Microphone, please double click the multi-function button to EXIT the"Hands free/Call
mode".
Warning: VOIP call mode does NOT support aptX and aptX LL!!! Please EXIT VOIP
CALL MODE AFTER USING THE MICROPHONE !!!
B10 For Windows 10 PC
1.Right click Speaker icon
2.Right Click, Choose”Open Sound Settings”
3.Sound>Choose your output device>B10
4.Input>Choose your input Devices>B10
5.Double click the multi-function button on B10 to enter the "Hands free/Call mode(the
LED indicator pulsing blue every 3 seconds)" to use the Microphone. After using the
Microphone, please double click the multi-function button to EXIT the"Hands free/Call
mode".
B10 on Skype(Win10 version)
1.Open Skype>go “Settings”
2.Please choose”Audio & Video” Microphone, please choose “B10” toggle on”
Automatically adjust microphone settings”
3.Speakers,please choose”B10”
B10 on PS4
1.Please choose “Settings”
2.Choose “Devices”
3. Choose”Audio Devices”
4.Choose “Output Devices” “USB Headset(B10)”
5.If you need to use the microphone,please choose “Input Device””USB Headset(B10)”
6.Double click the multi-function button on B10 to enter the "Hands free/Call mode(the
LED indicator blinks blue every 6 seconds)" to use the Microphone. After using the
Microphone, please double click the multi-function button to EXIT the"Hands free/Call
mode".
Warning: VOIP call mode does NOT support aptX and aptX LL!!! Please EXIT VOIP
CALL MODE AFTER USING THE MICROPHONE !!!
B10 on Ubuntu
1. Please go settings> Sound>Out put>Output Device,please choose “B10”,
Balance,please drag the bar to the middle or you will get mono channel Sound!
2. Input>Input Device,please choose”B10”
3.Double click the multi-function button on B10 to enter the "Hands free/Call mode(the
LED indicator pulsing blue every 3 seconds)" to use the Microphone. After using the
Microphone, please double click the multi-function button to EXIT the"Hands free/Call
mode".
Warning: VOIP call mode does NOT support aptX and aptX LL!!! Please EXIT call
mode after using the microphone.
/