Trend TT80061 User manual

TT80061

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

missing by referencing the illustrations on the installation instructions.

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit

conductor. Min 90ºC supply conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent

possible shock.

ASSEMBLY AND INSTALLATION

1. Use the mounting screw(1) and butterfly nut(2) to lock the legs together.

2. Put the shade (3) over the socket, secure it with the socket ring(4).

3. Install the bulb (5, not included) into the socket.

Do not exceed maximum suggested wattage - Max.60W

DO NOT USE BARE HAND TO TOUCH THE BULB.

INSTALLATION IS NOW COMPLETE

1. MOUNTING SCREW

2. BUTTERFLY NUT

3. METAL SHADE

4. SOCKET RING

5. BULB