Rain Harvesting Clean Rain Ultra Installation guide

Brand: Rain Harvesting

Model: Clean Rain Ultra

Category: Sanitary ware

Type: Installation guide

Code

Size

Country

DDCR01

90mm

100mm

100x50mm

100x75mm

Australia

DDCR99

3" SCH40

4" SCH40

2x3"

3x4"

USA

Clean Rain Ultra

PRODUCT DETAILS

An all-in-one rainwater diverter which incorporates a

rain head and first flush diverter to ensure clean

water is diverted to your rainwater tank, rain barrel,

pool or garden. The integrated cover and cap

provide a stylish finish.

Installation and Specification Guide

rainharvesting.com

WHAT'S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE

INSTALLATION

Clean Rain Ultra Tape measure

Marker pen

Saw

Screws

Screwdriver or drill

Solvent cement glue

Installation

1 - Remove 745mm of downpipe from where the Clean Rain® is to be situated. Ensure all edges are clean

and smooth.

2 - Remove the cap and use snips to remove a section to fit the downpipe.

3 - Remove the cover by flexing outwards at the top.

4 - Fit the correct downpipe adaptor to the bottom of the Clean Rain®.

5 - Slide the cap up the top section of downpipe and hold temporarily in place.

6 - Install the Clean Rain® by positioning it securely on the bottom section of downpipe.

7 - Screw the top of the Clean Rain® in position through the screw slots provided. Ensure appropriate

screws and anchors (if required) are used.

8 - Check the placement of the Vibrating Screen. It must sit behind and below the front face (FIGURE 1).

9 - Insert the Leaf Slide into slot holes (FIGURE 2).

10 - Re-install the front cover.

11 - Slide the cap back down the downpipe until it sits securely on top of the Clean Rain® unit.

12 - Fit the hose or pipe of your choice (20mm garden hose thread, 22mm greywater hose, 38mm pool

hose or 90mm pipe) to the outlet.

(a) For a garden hose, unscrew one or two caps and screw one or two garden hoses onto the outlet.

(b) For a 22mm greywater hose and 38mm pool hose, unscrew the cap and push the hose onto the outlet.

pipe and glue. Reinsert the cap into the Clean Rain outlet and swivel the Clean Rain body to direct the

pipe towards your rainwater tank or where the rainwater is being diverted to.

rainharvesting.com

Figure 1

Suggested Installation Orientations

Figure 2

Suggested Installation Orientations

NOTE: ON/OFF Switch - The Clean Rain® can be turned off so that no water is diverted to your rainwater

tank, rain barrel, pool or garden. To do this simply flick the switch on the front of the Clean Rain® and in

the next rainfall event all the water will be diverted to stormwater.

rainharvesting.com

Country

Code

Australia

DDCR01

90 M

90 F

796

206

513

229

20mm garden

hose thread

22mm greywater hose

38mm pool hose

Fits into 90mm Pipe

(cut off end of outlet)

100 F

100x50 M

100x50 F

100x75 M

100x75 F

USA

DDCR99

3"SCH40 M

3"SCH40 F

31.34"

8.11"

20.20"

9.02"

4" SCH40 M

4" SCH40 F

2"x3" M

2"x3" F

3"x4" M

3"x4" F

Product Specifications

Clean Rain Ultra

rainharvesting.com

All dimensions are in mm unless otherwise stated.

Fitting guide:

F = Female / Socket Fitting (Pipe fits inside)

M = Male / Spigot Gitting (Pipe size, fits into a socket)

LEFT SIDE VIEW FRONT VIEW RIGHT SIDE VIEW

A common misconception about collecting rainwater is that all you need is a

roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to

deliver the volume – or quality – of water that you require. That is where we can

help.

With some thought, your rain harvesting system can provide you with cleaner

water and lots of it. Whether you’re completely reliant on tank water or wanting

to keep the garden green, our simple steps will help you achieve your goal.

The Rain Harvesting approach to rainwater collection involves using tested and

proven products to make quality rainwater available for use in and around your

property. You don’t need much to get started and you will be surprised how

easy it is to get the most out of your rainwater system.

How can we help you?

DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the installation and Operating

instructions. This specification sheet must be read in conjunction with the installation and Operating Instructions and all applicable statutory requirement. Product specifications may

rainharvesting.com

Maintenance

COMPLIANCE