Lian Li G50.LAN20.00 Installation guide

Brand: Lian Li

Model: G50.LAN20.00

Category: Computer cases

Type: Installation guide

Lian Li G50.LAN20.00 is a versatile PC case designed for high-performance builds. It supports ATX, Micro-ATX, and Mini-ITX motherboards, and comes with four pre-installed 120mm fans for efficient airflow. The case also features a removable HDD tray for easy installation and maintenance of storage drives. With its sleek design and ample expansion options, the Lian Li G50.LAN20.00 is an excellent choice for gamers and enthusiasts who demand the best from their PC components.

Born To Perform

* * Composants du boîtier * Case components Guía de instalación

* * Gehäusekomponenten機殼部品介紹

- 1 -

120 mm fan x 1

Removable fan tray: Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1 or 280 mm radiator x 1

Removable HDD tray: Supporting 2.5” SSD x 2

PSU tray: Supporting ATX PSU x 1 (Removable dust filter in bottom)

IO ports: 1 x AUDIO / Microphone Combo Jack, 2 x USB 3.0, 1 x USB 3.1 Type C (Optional)

Power Button, Reset Button

120 mm fan x 1, or 240 mm radiator x 1,

Removable dust filter

Supporting 120 mm fan x 2 or 140 mm fan x 2 or 120 mm radiator x 1,

Removable HDD tray: Supporting 3.5" HDD x 3 or 2.5” SSD x 3

120 mm fan x 1 (Removable dust filter in front panel)

Supporting 120 mm fan x 2

Removable HDD tray: Supporting 2.5” SSD x 2

Born To Perform

I I

- 2 -

Born To Perform

I I

* 零件盒部品一覽表

* Hardware list

* Lista de materiales

* Liste des pièces

* Hardwareliste

Screws

for 3.5" HDD mount

Screws

for mother board

2.5" SSD mount

and

Screws

for PSU mounting

4 pcs

29 pcs

8 pcs

10 pcs

Cable ties

for cable management

Screws /

for 2.5" SSD mount

Anti-vibration rings

12 pcs

1 piece

Tool

for Stand off bolt

Exceeded quantity are spare parts.

多餘的零件數量是備品.

Zusätzliche Teile können als Ersatzteile verwendet werden.

Les pièces supplémentaires sont des pièces de rechange.

Exceeded quantity are spare parts.

8 pcs

Screws

for 120 mm fan

2 pcs

Velcro

for cable management

* Remove front panel

* 卸下前面板

* Retirer le panneau avant

* Frontplatte entfernen

* Retire el panel delantero

* 前面パネルを取り外す

- 3 -

Handle, Pull to release

Top

bottom

Born To Perform

I I

- 4 -

*Extracción del panel lateral

*Seitenwand abnehmen

*Remove the side panel

*側板拆卸

*Retirez le panneau latéral

Move up to release the side panel

First remove the front panel and then open

the side panels. Without removing the front panel.

Peel off the protective film

Attention:

Handle, Pull to release

Born To Perform

I I

Instalación de la fuente de alimentación

PSU installation

電源供應器安裝

Installation du plateau du bloc

d'alimentation

*PSU-Einsatz installieren

- 5 -

Turn 180 degrees to install the E-ATX motherboard

Tool

for remove stand off bolt

Born To Perform

I I

* 2.5"SSD / 3.5"HDD installation

* 2.5 SSD / 3.5 HDD安裝

* Installation de 2.5"SSD / 3.5"HDD

" "

* 2.5"SSD / 3.5"HDD - Installation

* Instalación de 2.5"SSD / 3.5"HDD

* 2.5"SSD / 3.5"HDDインストール

- 6 -

OPEN CLOSE

Note: HDD rack position can be adjusted

!The HDD tray needs to be pushed

in before closing the handle.

Warning:

Born To Perform

I I

Press

- 7 -

Born To Perform

I I

* 2.5"SSD installation

* 2.5 SSD安裝"

* Installation de 2.5"SSD

* 2.5"SSD - Installation

* Instalación de 2.5"SSD

* 2.5"SSDインストール

- 8 -

* LED control installation

* LED 控制安裝

* LED-Steuerung Installation

* Instalación de control LED

* LED制御のインストール

* Installation de contrôle à LED

Born To Perform

I I

- 9 -

1x AUDIO / Microphone Combo Jack

Optional

Born To Perform

I I

* 120 mm fan installation

* 120 mm 風扇安裝

* Installation de ventilateur de 120 mm

* 120 mm Lüfterinstallation

* Instalación de ventilador de 120 mm

* 120ミリメートルのファンの取り付け

Loosen the screws on both sides

* Remove the fan tray

* 卸下風扇架

* Retirez le plateau du ventilateur

* Entfernen Sie die Lüfterablage

* Retire la bandeja del ventilador

* ファントレイを取り外す

Pull to release the fan tray

The fan tray can be reversed and has four styles

Attention:

- 10 -

Styles 3 (Reversed)

Styles 1 Styles 2

Styles 4 (Reversed)

Born To Perform

I I

Radiator & cooling support

散熱器 & 水冷排支援

Assistance radiateur et

refroidissement

Kühler- und Kühlungsunterstützung

Radiador y soporte de refrigeración.

ラジエター＆冷却サポート

140 x 140 mm

140 x 280 mm

- 11 -

120 x 120 mm

140 x 140 mm

120 x 240 mm

140 x 280 mm

120 x 360 mm

120 x 120 mm

120 x 240 mm

120 x 360 mm

Remove the cover to install the 360 mm radiator

Attention:

140 x 140 mm 140 x 280 mm/

does not apply to this position.

Born To Perform

I I

- 12 -

* The fan is installed in the middle of the top cover

* 風扇安裝在上蓋的中間

* Le ventilateur est installé au milieu du capot supérieur

* Der Lüfter befindet sich in der Mitte der oberen Abdeckung

* El ventilador está instalado en el medio de la cubierta superior

* ファンはトップカバーの中央に取り付けられています

Born To Perform

I I

換照片

Front panel Top

Bottom

* Remove cover

* 卸下蓋子

- 13 -

Born To Perform

I I

* Retirer le couvercle

* Abdeckung abnehmen

* Retire la tapa

* カバーを外す

3 Remove

For RGB Controller or fan hub

- 14 -

Born To Perform

I I

176 mm 384 mm

210 mm 55 mm

110 mm

65 mm

- 15 -

Born To Perform

I I

Product name:

Vertical GPU kit

Side Diffused LEDs strip

Hot swappable back plate

3.1 type C cable

Graphic card anti-sag bracket

Model:

LANCOOL II - 1X

LANCOOL II - 2X

LANCOOL II - 3X

LANCOOL II - 4X

GB-001X

LANCOOL II - 1X Vertical GPU kit LANCOOL II - 2X Side Diffused LEDs strip

LANCOOL II - 3X Hot swappable back plate LANCOOL II - 4X 3.1 type C cable

GB-001X Graphic card anti-sag bracket

Lian Li G50.LAN20.00 Installation guide

Brand: Lian Li

Model: G50.LAN20.00

Category: Computer cases

Type: Installation guide

Download PDF

report

Lian Li G50.LAN20.00 Installation guide

Lian Li G50.LAN20.00 Installation guide

Other documents