1. Turn the four dials to the preset opening combination
in the combination window. By default, it should
be: 0000.
2. Press and turn the reset button 90 degrees
counterclockwise with the provided athead tool
to the reset position.
3. Turn the dials to set your own desired combination.
4. Press and turn the reset button 90 degrees clockwise
to its original position. Your lock is now ready to
open with its new combination.
1. Loop the security cable around a desk or xed structure.
2. Press and hold the release button, then insert the locking
hook into the locking slot of your laptop or peripheral.
3. Release the button and randomly rotate the dials.
Now your laptop or peripheral is secured.
Locking your laptop
Setting your own combination
KSD-360
Bolt C
Security cable lock
90°
Original position
Reset position
KSD-360
Quick setup guide
klipXtreme.com
Klip Xtreme® is a registered trademark. All rights reserved. All other brand names and trademarks are the property of their respective
owners. Any mention of such is only intended for identi cation purposes, and therefore shall not be construed as a claim to any or all
rights pertaining to those brands. Made in China.
