MTD 2030 Owner's manual

Category
Power hedge trimmers
Type
Owner's manual

This manual is also suitable for

OWNER'S OPERATING MANUAL
Hedge Trimmer
MANUEL D'UTILSATION
Broyeur de jardin
MANUAL DEL USUARIO
Esmeriladora Angular
Double Isolation
Double Insulated
Doble Aislacion
Model No. 2030,2031,2032
For problems or questions, DO NOT return
this product to the store. Contact your
Customer Service Agent at 1-800-521-8559.
En cas de problèmes ou pour des questions,
NE PAS renvoyer ce produit au magasin. S’adresser
au préposé du Service à la clientèle en composant le 1-800-521-8559.
Para problemas o preguntas, NO regrese este producto a la tirnada.
Contacte a su Agente de Servicio al Cliente al teléfono 1-800-521-8559.
STOP
ARRÊT
ALTO
1-800-521-8559
McCulloch
P.O.Box 31567 • Tucson, AZ 85751-1567 • USA
Jenn Feng U.S.A.
P.O.Box 5921 • Orange, CA 92863-5921 • USA
Jenn Feng Industrial Co., Ltd.
No. 19, Lane 118, Min Tsu Road, sec. 2
Ping Chang City, Taoyuan, Taiwan, R.O.C.
Made in Taiwan/Made in Taiwan/Made in Taiwan
6096-203003
Do not force tool. The correct tools will do the job
better and safer at the rate for which it is designed.
Disconnect the plug from the power source
before making any adjustment, changing
accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool
accidentally.
Store idle tools indoors. When not in use, tools
should be stored indoors in dry, and high or
locked-up lace, out of reach of children.
Maintain tools with care. Keep cutting tools sharp
and clean for best performance and to reduce the risk
of injury. Follow instructions for lubricating and
changing accessories. Inspect tool cord periodically,
and if damaged, have it repaired by an authorized
service facility. Keep handling surface dry, clean, and
free from oil and grease.
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other
condition that may affect its operation. A guard or
other part that is damaged should be properly
repaired or replaced by an authorized service center
unless indicated elsewhere in this manual.
1. The Hedge trimmer must not be used by anyone
under the age of 16.
2. Keep children, other people and pets away from
the trimmer.
3. Always dress properly, don’t wear loose clothing
or jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear is
recommended when working outdoor. Wear
protective hair covering to contain long hair.
4. Use face or dust mask if operation is dusty.
5. Do not use the trimmer if the cutting device is
not secured properly or is damaged.
6. Before starting the trimmer, make sure that the
luttig blade is not touching stones or debris.
7. When the trimmer is in operation, keep the
cutting section away from all parts of the body.
8. Do not cut against hard objects. This could cause
injury or damage the trimmer.
9. Only cut during broad daylight or with
corresponding artificial light.
10. Don’t abuse cord, never carry hedge trimmer by
cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
11. When the trimmer is not in use, store it in a dry
place and out of the reach of children.
12. The mains voltage must correspond to the one
marked on the technical data plate. Do not use
other sources of power.
13. Never use the trimmer when it is raining. Try to
prevent it from getting wet or being exposed to
humidity. Do not leave it outside overnight. Do
not cut damp or wet grass.
14. The power supply cable should be checked
regularly and before using it each time make
sure the cable is not damaged or old out. If the
cable is not in good condition, do not use the
trimmer. Take it to an authorized service centre
instead.
15. Only use an extension cable which is suitable for
outdoor work. Keep it away from the cutting
area, from damp, wet or oily surfaces or with
sharp edges and away from heat and fuels.
16. Avoid unintentional starting, don’t carry
plugged in hedge trimmer with fingers on both
switchs. Be sure switch is off when plugging in.
17. Do not attempt to remove cut material or hold
material to be cut when blades are moving.
make sure trimmer switch is off when clearing
jammed material from blades. Do not grasp the
exposed cutting blades or cutting edges when
picking up or holding the hedge trimmer.
CAUTION: Blades coast after turn off.
18. Don’t force hedge trimmer, it will do the job
better and with less likelihood of a risk of injury
at the rate for which it was designed.
19. Stay alert, watch what you are doing. Use
common sense. Do not operate hedge trimmer
when you are tired.
20. Maintain hedge trimmer with care, keep cutting
blades sharp and clean for best performance
and to reduce the risk of injury. Inspect
extension cord periodically and replace if
damaged. keep handles dry, clean and free from
oil and grease.
WEAR YOUR
SAFETY GLASSES
AND DUST MASK
2
HEDGE TRIMMER SAFETY RULES
SPECIFICATIONS . .2030
Input . . . . . . . . . . . . . . . .120V~, 60Hz, 3.75 Amp
No Load cutting rate . . . .3000/min
Cutting Thickness . . . . . .ø14mm
Blade Length . . . . . . . . . .16” (40mmO
Net Weight . . . . . . . . . . .2.5 Kg
SPECIFICATIONS . .2031
Input . . . . . . . . . . . . . . . .120V~, 60Hz, 3.75 Amp
No Load cutting rate . . . .3000/min
Cutting Thickness . . . . . .ø14mm
Blade Length . . . . . . . . . .18” (450mm)
Net Weight . . . . . . . . . . .2.5 Kg
SPECIFICATIONS . .2032
Input . . . . . . . . . . . . . . . .120V~, 60Hz, 3.75 Amp
No Load cutting rate . . . .3000/min
Cutting Thickness . . . . . .ø14mm
Blade Length . . . . . . . . . .20” (500mm)
Net Weight . . . . . . . . . . .2.5 Kg
1
WARNING! When using electric gardening tools,
basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal
injury, including the following.
GROUNDING INSTRUCTIONS
This tool should be grounded while in use to reduce
the risk of electric shock to the operator. The tool is
equipped with a 3-conductor cord and 3-prong
grounding plug to fit the proper grounding
receptacle. The green or green and yellow wire to
live terminal. If your unit is for use on less than 150
volts, it has a plug as illustrated in sketch A in Figure
1 on page 2. If it is for use on 150 to 250 volts, it has
a plug as illustrated in sketch D, Fig.1, Page 2.
An adapter, sketches B and C, is available for
connecting plugs as illustrated in sketch A to 2-prong
receptacles. The green-colored rigid ear, lug, or the
like, must be connected to permanent ground, such
as a properly grounded outlet box. No adapter is
available for the plug illustrated in sketch D.
EXTENSION CORDS
Use only three-wire outdoor extension cords that
have three-prong grounding plugs and grounding
receptacles that accept the appliance’s plug.
Avoid dangerous environment. Do not use
appliance in damp or wet locations.
Don’t use in rain. Water entering a power tools will
increase the risk of electric shock.
Do not abuse cord. Never yank it to disconnect
from receptacle. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of
electric shock.
Personal Safety
Keep children away. All visitors should be kept at a
distance from work area.
Dress properly. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Use of rubber
gloves and substantial footwear is recommended
when working outdoors. Wear protective hair
covering to contain long hair.
Use safety glasses. Always use face or dust mask if
operation is dusty.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tools while tired or under the influence of
drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
Avoid unintentional starting. Do not move
plugged-in appliance with finger on switch. Be sure
switch is off when plugging in.
Do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enables
better control of the tool in unexpected conditions.
No accessories or attachments are necessary for
the operation of this gardening tool. The use of
any accessories or attachments for this gardening tool
is not recommended. Such use of any attachment or
accessory may increase the risk of injury to the user.
Tool Use and care
Use right appliance. Do not use appliance for any
job except that for which it is intended.
Ground Fault circuit Interrupter (GFCI)
protection should be provided on the circuit(s)
or outlet(s) to be used for the gardening
appliance. Receptacles are available having built-in
GFCI protection and may be used for this measure of
safety.
Warning! To reduce the risk of electric shock, use
only with an extension cord intended for outdoor
use, such as an extension cord of cord type SW-A,
SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A,
SJTOW-A.
Extension cords of the type specified above are
available at local hardware stores.
Extension cord-Make sure your extension cord is in
good condition. When using an extension cord, be
sure to use one heavy enough to carry the current
your product will draw. An undersized extension cord
will cause a drop in line voltage resulting in loss of
power and overheating. Table 1 shows the correct
size to use depending on cord length and nameplate
ampere rating. If in doubt, use the next heavier gage.
Number, the heavier the cord. To reduce the risk of
disconnection of appliance cord from the extension
cord during operating:
Make a knot as shown in Figure 2;
Volts
120V
Ampere Rating
More than Not more than
0-6
6-10
10-12
12-16
Total length of cord in feet
25 50
100 150
18
18
16
14
16
16
16
12
16
14
14
16
14
14
Not recommended
TABLE 1
Method of securing extension cord
CORD
SET
APPLIANCE
CORD
(A) TIE CORD AS SHOWN
(B) CONNECT PLUG AND
RECEPTACLE
FIG. 2
GROUNDING
PIN
ADAPTER
GROUNDING
MEANS
GROUNDING
PIN
METAL SCREW
COVER OF
GROUNDED
DUTLET BOX
FIG. 1
READ ALL INSTRUCTIONS
ENGLISH
Do not force tool. The correct tools will do the job
better and safer at the rate for which it is designed.
Disconnect the plug from the power source
before making any adjustment, changing
accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool
accidentally.
Store idle tools indoors. When not in use, tools
should be stored indoors in dry, and high or
locked-up lace, out of reach of children.
Maintain tools with care. Keep cutting tools sharp
and clean for best performance and to reduce the risk
of injury. Follow instructions for lubricating and
changing accessories. Inspect tool cord periodically,
and if damaged, have it repaired by an authorized
service facility. Keep handling surface dry, clean, and
free from oil and grease.
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other
condition that may affect its operation. A guard or
other part that is damaged should be properly
repaired or replaced by an authorized service center
unless indicated elsewhere in this manual.
1. The Hedge trimmer must not be used by anyone
under the age of 16.
2. Keep children, other people and pets away from
the trimmer.
3. Always dress properly, don’t wear loose clothing
or jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear is
recommended when working outdoor. Wear
protective hair covering to contain long hair.
4. Use face or dust mask if operation is dusty.
5. Do not use the trimmer if the cutting device is
not secured properly or is damaged.
6. Before starting the trimmer, make sure that the
luttig blade is not touching stones or debris.
7. When the trimmer is in operation, keep the
cutting section away from all parts of the body.
8. Do not cut against hard objects. This could cause
injury or damage the trimmer.
9. Only cut during broad daylight or with
corresponding artificial light.
10. Don’t abuse cord, never carry hedge trimmer by
cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
11. When the trimmer is not in use, store it in a dry
place and out of the reach of children.
12. The mains voltage must correspond to the one
marked on the technical data plate. Do not use
other sources of power.
13. Never use the trimmer when it is raining. Try to
prevent it from getting wet or being exposed to
humidity. Do not leave it outside overnight. Do
not cut damp or wet grass.
14. The power supply cable should be checked
regularly and before using it each time make
sure the cable is not damaged or old out. If the
cable is not in good condition, do not use the
trimmer. Take it to an authorized service centre
instead.
15. Only use an extension cable which is suitable for
outdoor work. Keep it away from the cutting
area, from damp, wet or oily surfaces or with
sharp edges and away from heat and fuels.
16. Avoid unintentional starting, don’t carry
plugged in hedge trimmer with fingers on both
switchs. Be sure switch is off when plugging in.
17. Do not attempt to remove cut material or hold
material to be cut when blades are moving.
make sure trimmer switch is off when clearing
jammed material from blades. Do not grasp the
exposed cutting blades or cutting edges when
picking up or holding the hedge trimmer.
CAUTION: Blades coast after turn off.
18. Don’t force hedge trimmer, it will do the job
better and with less likelihood of a risk of injury
at the rate for which it was designed.
19. Stay alert, watch what you are doing. Use
common sense. Do not operate hedge trimmer
when you are tired.
20. Maintain hedge trimmer with care, keep cutting
blades sharp and clean for best performance
and to reduce the risk of injury. Inspect
extension cord periodically and replace if
damaged. keep handles dry, clean and free from
oil and grease.
WEAR YOUR
SAFETY GLASSES
AND DUST MASK
2
HEDGE TRIMMER SAFETY RULES
SPECIFICATIONS . .2030
Input . . . . . . . . . . . . . . . .120V~, 60Hz, 3.75 Amp
No Load cutting rate . . . .3000/min
Cutting Thickness . . . . . .ø14mm
Blade Length . . . . . . . . . .16” (40mmO
Net Weight . . . . . . . . . . .2.5 Kg
SPECIFICATIONS . .2031
Input . . . . . . . . . . . . . . . .120V~, 60Hz, 3.75 Amp
No Load cutting rate . . . .3000/min
Cutting Thickness . . . . . .ø14mm
Blade Length . . . . . . . . . .18” (450mm)
Net Weight . . . . . . . . . . .2.5 Kg
SPECIFICATIONS . .2032
Input . . . . . . . . . . . . . . . .120V~, 60Hz, 3.75 Amp
No Load cutting rate . . . .3000/min
Cutting Thickness . . . . . .ø14mm
Blade Length . . . . . . . . . .20” (500mm)
Net Weight . . . . . . . . . . .2.5 Kg
1
WARNING! When using electric gardening tools,
basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal
injury, including the following.
GROUNDING INSTRUCTIONS
This tool should be grounded while in use to reduce
the risk of electric shock to the operator. The tool is
equipped with a 3-conductor cord and 3-prong
grounding plug to fit the proper grounding
receptacle. The green or green and yellow wire to
live terminal. If your unit is for use on less than 150
volts, it has a plug as illustrated in sketch A in Figure
1 on page 2. If it is for use on 150 to 250 volts, it has
a plug as illustrated in sketch D, Fig.1, Page 2.
An adapter, sketches B and C, is available for
connecting plugs as illustrated in sketch A to 2-prong
receptacles. The green-colored rigid ear, lug, or the
like, must be connected to permanent ground, such
as a properly grounded outlet box. No adapter is
available for the plug illustrated in sketch D.
EXTENSION CORDS
Use only three-wire outdoor extension cords that
have three-prong grounding plugs and grounding
receptacles that accept the appliance’s plug.
Avoid dangerous environment. Do not use
appliance in damp or wet locations.
Don’t use in rain. Water entering a power tools will
increase the risk of electric shock.
Do not abuse cord. Never yank it to disconnect
from receptacle. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of
electric shock.
Personal Safety
Keep children away. All visitors should be kept at a
distance from work area.
Dress properly. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Use of rubber
gloves and substantial footwear is recommended
when working outdoors. Wear protective hair
covering to contain long hair.
Use safety glasses. Always use face or dust mask if
operation is dusty.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tools while tired or under the influence of
drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
Avoid unintentional starting. Do not move
plugged-in appliance with finger on switch. Be sure
switch is off when plugging in.
Do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enables
better control of the tool in unexpected conditions.
No accessories or attachments are necessary for
the operation of this gardening tool. The use of
any accessories or attachments for this gardening tool
is not recommended. Such use of any attachment or
accessory may increase the risk of injury to the user.
Tool Use and care
Use right appliance. Do not use appliance for any
job except that for which it is intended.
Ground Fault circuit Interrupter (GFCI)
protection should be provided on the circuit(s)
or outlet(s) to be used for the gardening
appliance. Receptacles are available having built-in
GFCI protection and may be used for this measure of
safety.
Warning! To reduce the risk of electric shock, use
only with an extension cord intended for outdoor
use, such as an extension cord of cord type SW-A,
SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A,
SJTOW-A.
Extension cords of the type specified above are
available at local hardware stores.
Extension cord-Make sure your extension cord is in
good condition. When using an extension cord, be
sure to use one heavy enough to carry the current
your product will draw. An undersized extension cord
will cause a drop in line voltage resulting in loss of
power and overheating. Table 1 shows the correct
size to use depending on cord length and nameplate
ampere rating. If in doubt, use the next heavier gage.
Number, the heavier the cord. To reduce the risk of
disconnection of appliance cord from the extension
cord during operating:
Make a knot as shown in Figure 2;
Volts
120V
Ampere Rating
More than Not more than
0-6
6-10
10-12
12-16
Total length of cord in feet
25 50
100 150
18
18
16
14
16
16
16
12
16
14
14
16
14
14
Not recommended
TABLE 1
Method of securing extension cord
CORD
SET
APPLIANCE
CORD
(A) TIE CORD AS SHOWN
(B) CONNECT PLUG AND
RECEPTACLE
FIG. 2
GROUNDING
PIN
ADAPTER
GROUNDING
MEANS
GROUNDING
PIN
METAL SCREW
COVER OF
GROUNDED
DUTLET BOX
FIG. 1
READ ALL INSTRUCTIONS
ENGLISH
1. The cutting blades are made from high quality,
hardened steel and with normal usage, they will
not require resharpening. However, if you
accidentally hit a wire fence, stones, glass or
other hard objects, you may put a nick in the
blade. There is no need to remove this nick as
long as it does not interfere with the movement
of the blade. if it does interfere, unplug unit
and use a fine toothed file or sharpening stone
to remove the nick.
2. If you drop the trimmer, carefully inspect it for
damage. If the blade is bent, housing cracked,
or handles broken or if you see any other
condition that may affect the trimmer’s
operation contact the authorized Center for
repairs before putting it back into use.
3. Fertilizers and other garden chemicals contain
agents which greatly accelerate the corrosion of
metals. Do not store the tool on or adjacent to
fertilizers or chemicals.
4. With the unit unplugged, use only mild soap
and a damp cloth to clean the tool. Never let
any liquid get inside the tool; never immerse
any part of the tool into a liquid.
4
MAINTENANCE
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed by
authorized service centers or other
qualified service organizations, always
using identical replacement parts.
INSTALLING SAFETY GUARD (FIG. 1)
1. Your Hedge trimmer comes fully assembled
except for the safety guard.
2. To assemble safety guard, align holes in safety
guard to holes in hedge trimmer and fix with
screws provided.
SWITCH (FIG. 2)
To turn the tool ON, squeeze the both triggers on
bail handle and body handle with your fingers at
same time. To turn the tool OFF, simply release any
trigger on bail handle or body handle. For your
safety, this hedge trimmer is two hand safety switch
designed, if you only squeeze the tringle on bail
handle or body handle, this trimmer won’t be
actuated.
• TRIMMING INSTRUCTIONS
1. EXTENSION CORD. Always keep extension cord
behind trimmer and away from the trimming
operation. Never drape it over a hedge being
trimmed. If you cut or damage the cord, unplug
it at the electrical outlet immediately, before
inspecting or repairing cord.
2. WORKING POSITION. Maintain proper footing
and balance and do not overreach. Wear safety
goggles, non-skid footwear and rubber gloves
when trimming. Hold the tool firmly in both
hands and turn the tool ON. Always hold the
trimmer, as shown in the illustrations, with on
hand on the body handle and one hand on the
auxiliary or bail handle. Never hold the tool by
the blade guard.
3. TRIMMING NEW GROWTH. A wide, sweeping
motion, feeding the blade teeth through the
twigs is most effective. A slight downward tilt of
the blade, in the direction of motion gives the
best cutting. (Fig. 3)
4. LEVEL HEDGES. To obtain exceptionally level
hedges, a piece of string can be stretched along
the length of the hedge as a guide. (Fig. 4)
5. SIDE-TRIMMING HEDGES. Hold the trimmer as
shown and begin at the bottom and sweep up.
(Fig. 5)
3
Fig. 4
Fig. 5
Fig. 2
Fig. 3
CAUTION: Do not use the trimmer for
cutting stems greater than 10mm. Use the
trimmer only for cutting normal shrubbery
found around houses and buildings.
OPERATION
A
E
F
B
D
C
A Rear Handle
BTrigger Switch
CFront Handle
D Hand Safety Switch
E Safety Guard
FBlade
Fig. 1
Glade guard
Screw
1. The cutting blades are made from high quality,
hardened steel and with normal usage, they will
not require resharpening. However, if you
accidentally hit a wire fence, stones, glass or
other hard objects, you may put a nick in the
blade. There is no need to remove this nick as
long as it does not interfere with the movement
of the blade. if it does interfere, unplug unit
and use a fine toothed file or sharpening stone
to remove the nick.
2. If you drop the trimmer, carefully inspect it for
damage. If the blade is bent, housing cracked,
or handles broken or if you see any other
condition that may affect the trimmer’s
operation contact the authorized Center for
repairs before putting it back into use.
3. Fertilizers and other garden chemicals contain
agents which greatly accelerate the corrosion of
metals. Do not store the tool on or adjacent to
fertilizers or chemicals.
4. With the unit unplugged, use only mild soap
and a damp cloth to clean the tool. Never let
any liquid get inside the tool; never immerse
any part of the tool into a liquid.
4
MAINTENANCE
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed by
authorized service centers or other
qualified service organizations, always
using identical replacement parts.
INSTALLING SAFETY GUARD (FIG. 1)
1. Your Hedge trimmer comes fully assembled
except for the safety guard.
2. To assemble safety guard, align holes in safety
guard to holes in hedge trimmer and fix with
screws provided.
SWITCH (FIG. 2)
To turn the tool ON, squeeze the both triggers on
bail handle and body handle with your fingers at
same time. To turn the tool OFF, simply release any
trigger on bail handle or body handle. For your
safety, this hedge trimmer is two hand safety switch
designed, if you only squeeze the tringle on bail
handle or body handle, this trimmer won’t be
actuated.
• TRIMMING INSTRUCTIONS
1. EXTENSION CORD. Always keep extension cord
behind trimmer and away from the trimming
operation. Never drape it over a hedge being
trimmed. If you cut or damage the cord, unplug
it at the electrical outlet immediately, before
inspecting or repairing cord.
2. WORKING POSITION. Maintain proper footing
and balance and do not overreach. Wear safety
goggles, non-skid footwear and rubber gloves
when trimming. Hold the tool firmly in both
hands and turn the tool ON. Always hold the
trimmer, as shown in the illustrations, with on
hand on the body handle and one hand on the
auxiliary or bail handle. Never hold the tool by
the blade guard.
3. TRIMMING NEW GROWTH. A wide, sweeping
motion, feeding the blade teeth through the
twigs is most effective. A slight downward tilt of
the blade, in the direction of motion gives the
best cutting. (Fig. 3)
4. LEVEL HEDGES. To obtain exceptionally level
hedges, a piece of string can be stretched along
the length of the hedge as a guide. (Fig. 4)
5. SIDE-TRIMMING HEDGES. Hold the trimmer as
shown and begin at the bottom and sweep up.
(Fig. 5)
3
Fig. 4
Fig. 5
Fig. 2
Fig. 3
CAUTION: Do not use the trimmer for
cutting stems greater than 10mm. Use the
trimmer only for cutting normal shrubbery
found around houses and buildings.
OPERATION
A
E
F
B
D
C
A Rear Handle
BTrigger Switch
CFront Handle
D Hand Safety Switch
E Safety Guard
FBlade
Fig. 1
Glade guard
Screw
OWNER'S OPERATING MANUAL
Hedge Trimmer
MANUEL D'UTILSATION
Broyeur de jardin
MANUAL DEL USUARIO
Esmeriladora Angular
Double Isolation
Double Insulated
Doble Aislacion
Model No. 2030,2031,2032
For problems or questions, DO NOT return
this product to the store. Contact your
Customer Service Agent at 1-800-521-8559.
En cas de problèmes ou pour des questions,
NE PAS renvoyer ce produit au magasin. S’adresser
au préposé du Service à la clientèle en composant le 1-800-521-8559.
Para problemas o preguntas, NO regrese este producto a la tirnada.
Contacte a su Agente de Servicio al Cliente al teléfono 1-800-521-8559.
STOP
ARRÊT
ALTO
1-800-521-8559
McCulloch
P.O.Box 31567 • Tucson, AZ 85751-1567 • USA
Jenn Feng U.S.A.
P.O.Box 5921 • Orange, CA 92863-5921 • USA
Jenn Feng Industrial Co., Ltd.
No. 19, Lane 118, Min Tsu Road, sec. 2
Ping Chang City, Taoyuan, Taiwan, R.O.C.
Made in Taiwan/Made in Taiwan/Made in Taiwan
6096-203003
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

MTD 2030 Owner's manual

Category
Power hedge trimmers
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI