2. Danfoss
  3. S40 P

Danfoss S40 P Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss S40 P Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Swashplate and covers
shown controlled on right.
Swashplate
New Desi
g
n
Bearing
Bearing
When replacing an old design swashplate, the enclosed new design swashplate
and bearings MUST be used. The shims and spacers MUST also be discarded.
Swashplate
Old Design
Spacer
Spacer
Shim
Shim
Bearing
Bearing
© Danfoss, 2013 BLN-10151 • Rev AA • September 2013 1
Service Kit Instructions
Series 40
Swashplate design change
/