AM2 AM5 AM6
AM7 AM9 510 5A
5305A
Compatible with the
following models:
REPLACEMENT TRANSMITTER
P/N 474A
REPLACEMENT TRANSMITTER
4-Button Remote Control
The following Learn Routine is used to program this replacement
transmitter to your system.
Prepare the vehicle system for pairing
1. Open a door.
2. Turn the key to the ON position.
3. Within 10 seconds, press and release the Program switch once.
Then press and HOLD it. The LED flashes or the siren/horn
sounds to confirm the selected channel. Do not release the
Program switch.
4. While holding the Program switch, press the
AUX
AUX
button on the
remote.
5. Once the code is learned, the Program switch can be released.
Standard Configuration
AUX
The lock button arms/locks the system.
AUX
The unlock button disarms/unlocks the system.
AUX The AUX button operates Trunk Release/Channel 2.
The star button operates Remote Start/Panic.
Note: Refer to owner’s guide for more details.
P/N 474A
01/19
WWW.DIRECTED.COM
MADE IN TAIWAN
© 2019 Directed. All rights reserved.
FCC/ID Notice
This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation. CAUTION! Changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s
authority to operate this device.
WARNING: This product can expose you to
chemicals including DEHP, which is known to
the State of Califotrnia to cause cancer and
birth defects or other reproductive harm. For
more information, go to www.P65Warnings.
ca.gov
560-10138 (R1.0)
/
