2. Sub-Zero
  3. ID-27R
ID-27R

Sub-Zero ID-27R Reference guide

  • Hello! I am an AI chatbot trained to assist you with the Sub-Zero ID-27R Reference guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the ID-27R?
    What are the ID-27R's dimensions and capacity?
    How many drawers does the ID-27R have?
    Does the ID-27R come with panels or handles?
    What panel requirements should be considered?
    How much clearance is needed for the drawer?
    What is the weight of the ID-27R?
    What electrical supply and service does the ID-27R require?
    Does the ID-27R have adjustable drawer dividers?
    What type of lighting does the ID-27R have?
27" DESIGNER REFRIGERATOR DRAWERS - PANEL READY
ID-27R
FEATURES
Accepts custom panels for an integrated look within cabinetry or
stainless-steel accessory panels and handles to match other Sub-Zero,
Wolf, and Cove products
Controls temperature within one degree of setpoint
Assure maximum freshness with low-temp, high-humidity crisper and deli
drawers
Locks in cold air to ensure freshness with magnetic door seals
Control brightness with soft-on LED lighting
Open and close doors silently with soft-close technology
ACCESSORIES
54" Stainless Steel Kickplate
Dual Installation Kit
Egg Container
Reduced Toekick Divider
Stainless Steel Pro Handles
Stainless Steel Tubular Handles
Stainless Steel Drawer Panels With Pro Handles - 4" Toe Kick
Stainless Steel Drawer Panels With Pro Handles - 6" Toe Kick
Stainless Steel Drawer Panels With Tubular Handles - 4" Toe Kick
Stainless Steel Drawer Panels With Tubular Handles - 6" Toe Kick
Accessories are available through an authorized dealer.
For local dealer information, visit subzero-wolf.com/locator.
HANDLE ACCESSORIES
PRODUCT DETAILS
REFRIGERATOR
• Adjustable drawer dividers
• LED lighting
Specifications are subject to change without notice. This information was generated on February 18, 2021. Verify specifications prior to finalizing your cabinetry/enclosures.
27" DESIGNER REFRIGERATOR DRAWERS - PANEL READY
PRODUCT SPECIFICATIONS
Model ID-27R
Dimensions 27"W x 34 1/2"H x 24"D
Drawer Clearance 18 3/8"
Weight 190 lbs
Refrigerator Capacity 4.6 cu. ft.
Electrical Supply 115 VAC, 60 Hz
Electrical Service 15 amp dedicated circuit
ELECTRICAL
PANEL SPECIFICATIONS For complete panels specifications including width/height,
weight requirements and thickness requirements visit subzero-wolf.com/reveal.
NOTE: Dimensions in parenthesis are in millimeters unless otherwise specified
INTERIOR VIEW
This illustration is intended for interior reference only and may not represent the exterior
of the model being specified.
DIMENSIONS
STANDARD INSTALLATION
NOTE:
3
1
/
2
"
(89)
finished returns will be visible and should be finished to match cabinetry
.
27"
(686)
3
4
1
/
2
"
(876)
OPENING
HEIGHT
SIDE VIEW
FRONT VIEW
25"
(635)
OPENING
DEPTH
TOP VIEW
3
/
4
"
(
19)
TYPICAL
FRAMED
CABINETRY
27"
(686)
FILLER
3
1
/
2
"
(89)
FINISHED
RETURN
FRAMELESS
CABINETRY
27"
(686)
3
/
4
"
(
19)
TYPICAL
3
1
/
2
"
(89)
FINISHED
RETURN
Specifications are subject to change without notice. This information was generated on February 18, 2021. Verify specifications prior to finalizing your cabinetry/enclosures.
/