Renkforce 0+10 ports SATA III controller card PCIe Owner's manual

Renkforce
Brand
Renkforce
Model
0+10 ports SATA III controller card PCIe
Category
Interface cards/adapters
Type
Owner's manual
2-I129-01A
- 1 -
10 Ports 6Gbps AHCI SATA III Host Adapter
1. Features
o 6Gbps SATA III Internal 10 Ports PCIe Gen2 2Lane Host Adapter
o Supports PCIe 1.0 and PCIe 2.0 motherboard
o Compliant with 10Gbps x2 PCI Express 2.0
o Fully compliant with Serial ATA specifications 3.0
o Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
o Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray
Drive
o Supports ATA and ATAPI commands
o Supports Native Command Queuing (NCQ)
o Does NOT support SATA Port Multiplier
o Low Profile PCIe Form Factor
o Regular size PCIe bracket on board and an additional Low Profile bracket
included
o SATA Hot-plug capability
o Pin headers on board for HDD LED connection
o 64bit / 32bit Windows 8, Win7, Vista, 2008, 2012, Linux and Mac 10.x OS
built-in AHCI inbox driver support, no additional driver required
2. Package Contents
o 10 Ports 6Gbps SATA Host Adapter
o Users Manual
3. D-SATA0 ~ D-SATA9 LED Pin Header
SATA0 ~ SATA9 LED Pin Header:
ON: When drive linked;
Blink: When drive accessing
H1 & H2 LED Pin Header:
ON: When any one of group 0~4 or Group 5~9 drives linked;
Blink: When any one of group 0~4 or Group 5~9 drives accessing
4. Installation
Simply install 10Port PCIe HBA into an available PCIe x2, x4, x8 or x16 slot and use OS
in-box AHCI driver.
  • Page 1 1

Renkforce 0+10 ports SATA III controller card PCIe Owner's manual

Renkforce
Brand
Renkforce
Model
0+10 ports SATA III controller card PCIe
Category
Interface cards/adapters
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents