dji MATRICE 300 RTK User guide

Type
User guide

This manual is also suitable for

1
JP
KR
CHS
CHT
EN
ES
FR
DE
NL
PT
PT-BR
RU
IT
Contents
User Guide 2
使用说明
9
使用
16
ユーザーガイ
23
사용자
가이드
30
Bedienungsanleitung 37
Guía de usuario 44
Guide de l'utilisateur 51
Guida all'uso 58
Gebruiksaanwijzing 65
Manual do utilizador 72
Guia do usuário 79
Руководство пользователя 86
Compliance Information 93
EN
2
Disclaimer
Please read this entire document and all safe and lawful practice DJI
TM
provided carefully, and visit
the DJI official website (http://www.dji.com) to download the full version of the User Manual and
carefully read all instructions and warnings therein before use. Failure to read and follow instructions
and warnings or lack of strong awareness of safety during the operation may result in serious injury
to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using
this product, you hereby signify that you have read this disclaimer and warning carefully and that you
understand and agree to abide by the terms and conditions herein. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. You
agree to use this product only for legitimate purposes. DJI accepts no liability for damage, injury or
any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated
companies. Names of products, brands, etc., appearing in this document are trademarks or registered
trademarks of their respective owner companies. This product and document are copyrighted by DJI
with all rights reserved. No part of this product or document shall be reproduced in any form without
the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion of DJI. For
up to date product information, visit http://www.dji.com and click on the product page for this product.
This disclaimer is available in various languages. In the event of divergence among dierent versions,
the English version shall prevail.
Warning
Always stay alert when using the DJI Smart Controller Enterprise (hereinafter referred as “Smart
Controller”) to control an Unmanned Aerial Vehicle (UAV). Carelessness may result in serious harm to
yourself and others. Always download and read the Disclaimer and Safety Guidelines of the aircraft
and the detailed User Manual before usage.
1. Fully charge the Smart Controller before each ight.
2. If the Smart Controller is turned on and the touch screen is o for ve minutes, an alert sound will
be triggered. Ten seconds after the alert sound, the Smart Controller will automatically power o.
Move the sticks or perform some other action to cancel the alert.
3. Ensure the antennas are unfolded and adjusted to the proper position to achieve the optimal
transmission quality.
4. Contact DJI support to repair or replace the antennas if they are damaged. Damaged antennas
will greatly decrease performance.
5. Link the Smart Controller and the aircraft again if you change the aircraft.
6. Ensure to power o the aircraft before the Smart Controller.
7. Fully charge the Smart Controller every three months.
8. Immediately charge the Smart Controller when its power level decreases to 10% to prevent the
Smart Controller from damage due to over discharge for an extended period. Discharge the Smart
Controller to a power level between 40% and 60% if stored for an extended period.
9. DO NOT cover the air vent on the Smart Controller. Otherwise, the Smart Controller may become
too hot, which could aect its performance.
10. DO NOT disassemble the Smart Controller without the assistance of a DJI authorized dealer.
Always contact DJI or a DJI authorized dealer to replace the Smart Controller’s components.
11. DO NOT block the Smart Controller's built-in GPS. In cases where the DJI Smart Controller
Enterprise Screen Mounting Bracket (hereinafter referred as “Mounting Bracket”) is installed,
remove it and try again if GPS signal is poor.
12. To avoid wear and tear of the Stick Covers, DO NOT disassemble the sticks on a frequent basis.
EN
3
Introduction
The DJI Smart Controller Enterprise (hereinafter referred to as “Smart Controller”) features
OCUSYNC
TM
Enterprise technology, capable of controlling aircraft that supports this technology, and
providing a live HD view from the aircraft's camera. It can transmit image data at distances of up to 9.32
mi (15 km) and comes with a number of aircraft and gimbal controls as well as some customizable
buttons.
1
The built-in 5.5-inch high brightness 1000 cd/m² screen has a resolution of 1920×1080 pixels,
featuring an Android system with multiple functions such as Bluetooth and GNSS. In addition to
supporting Wi-Fi connectivity, it is also compatible with other mobile devices for more exible usage.
The Smart Controller has a maximum working time of 2.5 hours with the built-in battery. When using
the WB37 Intelligent Battery, the maximum working time can be extended to 4.5 hours.
2
1
The Smart Controller can reach its maximum transmission distance (FCC) in an unobstructed area with no electro-
magnetic interference at an altitude of about 400 feet (120 meters). The actual maximum transmission distance
may be less than the distance mentioned above due to interference in the operating environment, and the
actual value will uctuate according to the strength of interference. To comply with local regulations, the 5.8 GHz
frequency is not available in some countries and regions.
2
Maximum run time is estimated in a lab environment at room temperature, for reference only. When the Smart
Controller is powering other devices, the run time will be diminished.
3
The type and quantity vary depending on the region.
4
The illustrations in this manual may vary from the actual product.
In the Box
Smart Controller
USB-C Cable
Spare Control Stick (pair)
×1
×1
×1
WB37 Intelligent Battery ×1 ×1
USB Cable (with Double
A Ports)
×1
Spare Stick Cover (pair) ×1
USB Charger
3
Smart Controller Lanyard
4
×1
Manuals
DJI Smart Controller Enterprise User Guide
WB37 Intelligent Battery Safety Guidelines
EN
4
Overview
1. Antennas
2. Back Button / Function Button
3. Control Sticks
4. Stick Covers
5. RTH Button
6. Flight Pause Button
7. Flight Mode Switch
8. Position for Mounting Bracket (with built-in
GPS module under it)
9. Status LED
10. Battery Level LEDs
11. 5D Button
12. Power Button
13. Conrm Button / Customizable Button C3
14. Touch Screen
15. Charging Port (USB-C)
16. Lanyard Hooks
17. Handle
1
9
10
12
13
16
14
8
7
11
16
17
5
6
3
4
2
16
15
18
20 2221
24
23
19
18. Gimbal Pitch Control Dial
19. Record Button
20. HDMI Port
21. microSD Card Slot
22. USB-A Port
23. Focus / Shutter Button
24. Gimbal Pan Control Dial
25. Air Vent
26. Sticks Storage Slot
27. Spare Sticks
28. Customizable Button C2
29. Customizable Button C1
30. WB37 Intelligent Battery
31. Battery Release Button
25
29
30
28
31
26
27
EN
5
1. Charging the Smart Controller
Please use the ocial USB charger to charge the Smart Controller. When a standard USB charger is not
available, it is recommended to use an FCC / CE certied USB charger rated 12 V / 2 A.
Please recharge the battery at least every three months to prevent over discharging - the battery will deplete
when stored for an extended period.
It takes roughly 2 hours and 15 minutes to fully charge the Smart
Controller using the standard USB charger.
Power Outlet
(100 - 240 V)
USB charger
USB-C Cable
2. Mounting the WB37 Intelligent Battery
1
2
3
1
Press and hold the battery release
button.
2
Insert the Intelligent Battery into the
battery compartment. Make sure the
bottom of the battery is aligned to the
marking line in the compartment.
3
Push the battery to the bottom.
To remove the Intelligent Battery, press and hold the battery release button, then push the battery
upward.
Refer to the BS60 Intelligent Battery Station User Guide for Intelligent Battery charging details.
3. Mounting the 4G Dongle and SIM Card
Only use a DJI-approved dongle.
The dongle and SIM card enable the Smart Controller to access 4G network. Make sure to
deploy these correctly, otherwise, network access will not be available.
The dongle and SIM card are excluded.
Remove the dongle compartment cover.
Insert the dongle into the USB port with the SIM card inserted
into the dongle.
Reattach the cover rmly.
EN
6
6. Linking the Smart Controller and Aircraft
When the Smart Controller is purchased together with an aircraft as a combo, it is already linked
to the aircraft. If not, please follow the steps below to link the Smart Controller and the aircraft
after successful activation.
1. Turn on the Smart Controller and the aircraft.
2. Press down the customizable buttons C1, C2, and the record button simultaneously. The
status LED will blink blue and the Smart Controller will sound a double beep to indicate that
linking starts.
3. Press and hold the aircraft's power button for at least ve seconds to link the aircraft and the
Smart Controller. The Smart Controller’s status LED will be solid green if linking is successful.
Please refer to the user manual for more details about linking the Smart Controller to the aircraft. To
download the manual, please visit https://www.dji.com/matrice-300.
Lift the antennas and adjust them. The strength of the Smart
Controller signal is affected by the position of the antennas.
When the angle between the antennas and the back of the Smart
Controller is 80° or 180°, the connection between the Smart
Controller and aircraft can reach its optimal performance.
Optimal Transmission Zone
Try to keep the aircraft inside the optimal transmission zone. If the signal is weak, adjust the
antennas or y the aircraft closer.
5. Adjusting the Antennas
80°
Avoid using wireless devices that use the same frequency bands as the Smart Controller.
In real operation, the DJI Pilot app will issue a prompt to warn that the transmission signal is weak, and
please adjust the antennas to ensure that the aircraft is back to the optimal transmission range.
4. Checking the Battery Level and Turning On
Check the internal battery level according to the
Battery Level LEDs. Press the power button once to
check it while turned o.
Press the power button once, press again and hold for
a few seconds to turn on/o the Smart Controller.
Low High
When using external WB37 Intelligent Battery, it is still necessary to make sure that the internal battery has
some power. Otherwise, the Smart Controller cannot be turned on.
Please refer to the user manual for more details about checking the internal and external battery levels.
EN
7
The motors can only be stopped mid-ight when the ight controller detects a critical error. Use
with caution.
Be sure the Smart Controller is linked to the aircraft.
Refer to the user manual for more Smart Controller usage details (e.g. dual Smart Controller
operations).
The default ight control is known as Mode 2. The left stick controls the aircraft’s altitude and
heading, while the right stick controls its forward, backward, and left and right movements.
Manual Takeoff/Landing
Combination Stick Command to
start/stop the motors.
Slowly push the left stick up to
take o. (Mode 2)
Slowly push the left stick down until
the aircraft lands. Hold for a few
seconds to stop the motors.
OR
左摇杆 右摇杆
左摇杆 右摇杆
右转左转
上升
下降
右转左转
上升
下降
Left Stick Right Stick
Up
Turn Left
Left
Forward
Backward
Turn Right
Right
Down
7. Flight
Before taking off, make sure the Aircraft Status Bar
in the DJI Pilot app displays “Ready to Go (GPS)” or
“Ready to Go (RTK)”.
Ready to Go (GPS)
Specications
OcuSync Enterprise
Operation Frequency Range 2.400-2.4835 GHz; 5.725-5.850 GHz
1
Max Transmission Distance
(Unobstructed, free of
interference)
NCC / FCC: 15 km
CE / MIC: 8 km
SRRC: 8 km
Transmitter Power (EIRP)
2.400-2.4835 GHz:
29.5 dBm (FCC); 18.5 dBm (CE) ; 18.5 dBm (SRRC); 18.5 dBm (MIC)
5.725-5.850 GHz: 28.5 dBm (FCC); 12.5 dBm (CE); 20.5 dBm (SRRC)
EN
8
Wi-Fi
Protocol Wi-Fi Direct, Wi-Fi Display, 802.11a/g/n/ac, Wi-Fi with 2×2 MIMO is supported
Operation Frequency Range 2.400-2.4835 GHz; 5.150-5.250 GHz
1
; 5.725-5.850 GHz
1
Transmitter Power (EIRP)
2.400-2.4835 GHz:
20.5 dBm (FCC); 18.5 dBm (CE); 18.5 dBm (SRRC); 20.5 dBm (MIC)
5.150-5.250 GHz:
14 dBm (FCC); 14 dBm (CE); 14 dBm (SRRC); 14 dBm (MIC)
5.725-5.850 GHz: 18 dBm (FCC); 12 dBm (CE); 18 dBm (SRRC)
Bluetooth
Protocol Bluetooth 4.2
Operation Frequency Range 2.400-2.4835 GHz
Transmitter Power (EIRP) 4 dBm (FCC); 4 dBm (CE); 4 dBm (SRRC); 4 dBm (MIC)
General
External Battery
Name: WB37 Intelligent Battery
Capacity: 4920 mAh; Voltage: 7.6 V
Battery Type: LiPo; Energy: 37.39 Wh
Charge Time (Using BS60 Intelligent Battery Station): 70 min (15° to 45° C);
130 min (0° to 15° C)
Built-in Battery
Battery Type: 18650 Li-ion (5000 mAh @ 7.2 V)
Charge Type : Supports USB charger rated 12 V / 2 A
Rated Power: 17 W
2
Charge Time: 2 hours and 15 minutes (Using a USB charger rated 12 V / 2 A)
Working Time
2
Built-in Battery: Approx. 2.5 hours
Built-in Battery + External Battery: Approx. 4.5 hours
Storage Capacity ROM 32GB + RAM 4GB
Video Output Port HDMI Port
Power Supply Voltage / Current
(USB-A port)
5 V / 1.5 A
Operation Temperature Range -20° to 40° C (-4° to 104° F)
Storage Temperature Range
Less than one month: -30° to 60° C (-22° to 140° F)
One month to three months: -30° to 45° C (-22° to 113° F)
Three months to six months: -30° to 35° C (-22° to 95° F)
More than six months: -30° to 25° C (-22° to 77° F)
Charging Temperature Range 5° to 40° C (41° to 104° F)
Supported Aircraft Models
3
Matrice 300 RTK
GNSS GPS+GLONASS
Weight
External Battery excluded: Approx. 885 g
External Battery included: Approx. 1054 g
Dimensions (Antennas folded) 178×164×108 mm
Model RM500-ENT
1
Local regulations in some countries prohibit the use of the 5.8 GHz and 5.2 GHz frequencies and in some regions
the 5.2 GHz frequency band is only allowed for indoor use.
2
The Smart Controller will supply power for the mobile device installed, which may affect the above-mentioned
specications.
3
The Smart Controller will support more DJI aircraft in future. Please visit the ocial website for the latest information.
93
Compliance Information
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End user must follow the specic operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
The remote controller is designed to meet the requirements for exposure
to radio waves established by the Federal Communications Commission
(USA). These requirements set a SAR limit of 1.6 W/kg averaged over one
部件名称
有害物质
(Pb) (Hg) (Cd) 六价铬 (Cr
+6
) 多溴联苯 (PBB) 多溴二苯醚 (PBDE)
线路板
×
外壳
×
金属部件(铜合金)
×
内部线材
×
其他配件
×
本表格依据 SJ/T 11364 的规定编制。
○:表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
×:表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。(产品符合欧盟 ROHS 指令环保要求)
KCC Compliance Notice
“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니
다 .”
“해당 무선설비는 운용 중 전파혼신 가능성이 있음”
NCC Compliance Notice
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不
設備名稱:DJI Smart Controller Enterprise,型號(型式):RM500-ENT
單元U nit
限用物質及其化學符號
鉛 Lead
(Pb)
汞 Mercury
(Hg)
鎘 Cadmium
(Cd)
六價鉻 Hexavalent
chromium(Cr
+6
)
多溴聯苯 Polybrominated
biphenyls
(PBB)
多溴二苯醚 Polybrominated
diphenyl ethers (PBDE)
線路板
外殼
排針
其他
備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
備考 3.〝-〞係指該項限用物質為排除項目。
gram of tissue. The highest SAR value reported under this standard during
product certication for use when properly worn on the body
ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions: (1)
This device may not cause interference.(2)This device must accept any
interference, including interference that may cause undesired operation of
the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil
est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil
ne doit pas produire de brouillage; (2)L’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
This equipment complies with ISED radiation exposure limits set forth for
an uncontrolled environment. End user must follow the specic operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.The portable device is designed to meet the requirements for
exposure to radio waves established by the ISED.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram
of tissue. The highest SAR value reported under this standard during
product certication for use when properly worn on the body.
Cet équipement est conforme aux limites d’exposition aux rayonnements
ISED établies pour un environnement non contrôlé. L’utilisateur final
doit suivre les instructions spécifiques pour satisfaire les normes. Cet
émetteur ne doit pas être co-implanté ou fonctionner en conjonction
avec toute autre antenne ou transmetteur. Le dispositif portatif est conçu
pour répondre aux exigences d’exposition aux ondes radio établie par le
développement énergétique DURABLE.
Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme
de tissu. La valeur SAR la plus élevée signalée en vertu de cette norme
lors de la certication de produit à utiliser lorsqu’il est correctement porté
sur le corps.
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾
現象時,應改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之
無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電
機設備之干擾。
注意:
應避免影響附近雷達系統之操作。
高增益指向性天線只得應用於固定式點對點系統。
This content is subject to change.
Download the latest version from
https://www.dji.com
If you have any questions about this document, please contact DJI by
sending a message to
DJI is a trademark of DJI.
Copyright © 2020 DJI All Rights Reserved.
Printed in China.
3GMD3PSM03
DJI Support
DJI
技术支持
DJI
技術支援
DJI
サポート
DJI
고객지원
DJI Support
Servicio de asistencia de DJI
Service client DJI
Assistenza DJI
DJI-ondersteuning
Assistência da DJI
Suporte DJI
Техническая поддержка DJI
http://www.dji.com/support
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

dji MATRICE 300 RTK User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI