Hama 00054650 Owner's manual

Type
Owner's manual

Hama 00054650

The Hama 00054650 is a dual charger for Wii remotes. It comes with two 2.4V 700mAh rechargeable batteries and an adapter to connect the charger to the Wii console.

To use the charger, first remove the original battery cover from the Wii remote and insert the rechargeable battery with integrated battery compartment cover. Then, connect the charger to the Wii console using the supplied adapter and cable. Finally, place the Wii remotes on the charging cradle and the charging process will begin.

The LED on the charger will light up red while charging and will turn blue once charging is complete. When charging is complete, remove the Wii remotes from the charger to avoid shortening the battery life.

Hama 00054650

The Hama 00054650 is a dual charger for Wii remotes. It comes with two 2.4V 700mAh rechargeable batteries and an adapter to connect the charger to the Wii console.

To use the charger, first remove the original battery cover from the Wii remote and insert the rechargeable battery with integrated battery compartment cover. Then, connect the charger to the Wii console using the supplied adapter and cable. Finally, place the Wii remotes on the charging cradle and the charging process will begin.

The LED on the charger will light up red while charging and will turn blue once charging is complete. When charging is complete, remove the Wii remotes from the charger to avoid shortening the battery life.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Hama 00054650 Owner's manual

Type
Owner's manual

Hama 00054650

The Hama 00054650 is a dual charger for Wii remotes. It comes with two 2.4V 700mAh rechargeable batteries and an adapter to connect the charger to the Wii console.

To use the charger, first remove the original battery cover from the Wii remote and insert the rechargeable battery with integrated battery compartment cover. Then, connect the charger to the Wii console using the supplied adapter and cable. Finally, place the Wii remotes on the charging cradle and the charging process will begin.

The LED on the charger will light up red while charging and will turn blue once charging is complete. When charging is complete, remove the Wii remotes from the charger to avoid shortening the battery life.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI