6
Quick Reference Guide
Voice Control Operation
Voice Portal Screen
a Press and release the d (Talk) button
on the top screen of any mode.
The system prompts you to say a voice
command and gives examples. Press
and release the d (Talk) button again
to bypass this prompt.
z The system beeps when ready for a
command. Press the J (Hang-Up/
Back) button to cancel.
z Available voice commands are
highlighted on the screen.
b Say a voice command (e.g., Address).
After that, follow the voice prompt
and say a voice command.
z The audio system is muted during voice
control mode.
z You can use other voice commands on
the Voice Portal screen. Voice Command
Index (P330)
z Say d “Voice Help” to enter supported
commands for the current screen. A
voice help tutorial is also available. Voice
Help (P16)
z During the voice control mode, press and
hold the J (Hang-Up/Back) button to
return to the Voice Portal screen.
z Set Voice Prompt to Off to bypass the
voice prompt. Voice Recognition
Settings (P26)
z Carefully read the usage note for the
voice control. Voice Control System
(P24)
On the Menu Screen
z Say d “Voice portal” to display the
Voice Portal on any screen.
z Say d “Voice Help” to enter supported
commands for the current screen. A
voice help tutorial is also available. Voice
Help (P16)
a Press and release the d (Talk) button
on the menu or setting screen.
The system prompts you to say a voice
command and gives examples. Press
and release the d (Talk) button again
to bypass this prompt.
Available voice commands are
highlighted on the screen.
b Say a voice command.
MDX_KA-31TZ58200.book 6 ページ 2014年12月18日 木曜日 午後3時59分