LG 42LH200H User manual

www.lg.com

Please read this manual carefully before operating

your set and retain it for future reference.

ENGLISH

OWNER’S MANUAL

LCD TV

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or regis-

tered trademarks of HDMI Licensing LLC.

Wall Mounting Bracket(Separate purchase)

(26/32LH2

***

)(19/22LH2

***

)

RW230RW120

(32/37/42LH2

***

)

AW-47LG30M

I

CONTENTS

Contents

PRePARAtIon

LCD TV MODELS : 19/22/26/32/37/42LH2*** A-1

exteRnAl equIPment setuP

Antenna Connection ............................................1

Connecting with a Component cable ..................2

Connecting with an HDMI cable .........................3

Speaker output Setup .........................................3

Connecting with an HDMI to DVI cable ..............4

Connecting with a Euro Scart cable ...................5

Usb setup ............................................................6

Connecting with a RF Cable ...............................6

Connecting with a D-sub 15 pin cable ................7

Insertion of CI Module .........................................8

Digital audio out Setup ........................................9

Headphone Setup ...............................................9

Supported Display Resolution ...........................10

Screen Setup for PC mode ...............................11

WAtChIng tV / PRogRAmme ContRol

Turning on the TV .............................................15

Initializing Setup ...............................................15

Programme Selection ........................................15

Volume Adjustment ...........................................15

Quick Menu .......................................................16

On Screen Menus Selection and adjustment ...17

Auto programme tuning ...................................18

Manual programme Tuning ...............................20

Programme Edit ...............................................28

CI [Common Interface] Information ...................32

Selecting the Programme List ...........................33

Input List ............................................................35

Input Label ........................................................36

Data Service ......................................................37

SIMPLINK ..........................................................38

AV Mode ............................................................42

Initializing(Reset to original factory settings) ....43

to use A usB deVICe

When connecting a USB device .......................44

Movie list ..........................................................46

Photo list ............................................................57

Music list ............................................................67

DivX Registration Code ....................................76

Deactivation .....................................................77

ePg(eleCtRonIC PRogRAmme

guIde)(In dIgItAl mode)

Switch on/off EPG .............................................79

Select a programme ..........................................79

Button Function in NOW/NEXT Guide Mode ...80

Button Function in 8 Day Guide Mode .............81

Button Function in Date Change Mode ............82

Button Function in Extended Description Box ..83

PICtuRe ContRol

Picture Size (Aspect Ratio) Control ..................84

Energy Saving ...................................................86

Preset Picture Settings .....................................88

Manual Picture Adjustment ...............................89

Picture Improvement Technology ......................90

Expert Picture Control .......................................91

Picture Reset .....................................................94

Power Indicator ................................................95

DEMO MODE ....................................................95

II

CONTENTS

SOuNd & LaNguagE CONTrOL

Auto Volume Leveler .........................................96

Clear Voice II .....................................................97

Preset Sound Settings-Sound Mode ................98

Sound Setting Adjustment -User Mode ............99

Infinite Sound ..................................................100

Balance ...........................................................101

DTV Audio Setting (in digital mode only) ........102

Selecting Digital Audio out ..............................103

Audio Reset .....................................................104

Audio Description (In digital mode only) .........105

I/II

- Stereo/Dual Reception (In Analogue Mode Only) ...

106

- NICAM Reception (In Analogue Mode Only) .. 107

- Speaker Sound Output Selection .................107

On-Screen Menu Language / Country Selectio

n ...108

Language Selection ........................................109

TimE SETTiNg

Clock Setup .....................................................111

Auto on/off time setting ...................................112

Sleep Timer setting .........................................112

Alarm Setting ...................................................113

Automatic Standby ..........................................113

ParENTaL CONTrOL / raTiNgS

Set Password & Lock System.........................114

Block Programme ............................................115

Parental Control (In Digital Mode only) ...........116

External Input Blocking ...................................117

Key Lock..........................................................118

TELETExT

Switch on/off ...................................................119

SIMPLE Text....................................................119

TOP Text..........................................................120

Fastext .............................................................120

Special Teletext Functions ..............................121

digiTaL TELETExT

Teletext within Digital Service .........................122

Teletext in Digital Service ................................122

aPPENdix

Troubleshooting ...............................................123

Maintenance ....................................................125

Product Specifications .....................................126

IR Codes .........................................................127

External Control Device Setup ........................128

Open source software notice ..........................135

A-1

PREPARATION





Ensure that the following accessories are included with your TV. If an accessory is missing, please

contact the dealer where you purchased the TV.

■ Image shown may differ from your TV.



Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

Install the power plug closely.

Owner’s Manual

Batteries

Remote Control

Power Cord

Polishing Cloth

Polishing cloth for

use on the

screen.

This item is not included for all models.

* Lightly wipe any stains

or fingerprints on the

surface of the TV with

the polishing cloth.

Do not use excessive force.

This may cause scratching

or discolouration.

Ferrite Core

(

This item is not included for

all models.

)



Protection Cover

or

(Only 19/22LH2

***

)

Cable management clip

(Only 26/32/37/42LH2

***

)

1-screw for stand fixing

Bolts for stand assembly

x 4

(Only 26/32/37/42LH2

***

)

Protective Bracket and

Bolt for Power Cord

(Only 26/32/37/42LH2

***

)

Dual Lock™

(

This item is not included for all

models.

)

or

A

V MODE

ENERGY

SA

VING

RETURN / EXIT

MENU

Q.MENU INFO GUIDE

i

MUTE

POWER

LIST

Q.VIEW

MARK

FAV

This item is not included for all models.

VELCRO (LOOP)

VELCRO (HOOK)

HOLDER CABLE

A-2



PREPARATION



(Only 32/37/42LH2

***

)

INPUT MENU

P

OK

PROGRAMME

VOLUME

(Only 19/22/26LH2

***

)

PROGRAMME

VOLUME

OK

MENU

INPUT

POWER

OK

INPUT

POWER

MENU

INPUT

MENU

ENTER

CH

VOL

POWER

Remote Control Sensor

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the TV is

switched on.



►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will

reduce energy consumption.

►The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

■ Image shown may differ from your TV.

A-3





 





















































































































  

   

HDMI / DVI IN

ANTENNA IN

COMPONENT IN

USB IN

H/P

RGB IN (PC)

(RGB)

SPEAKER

OUT

VOLUME

CONTROL

RJP

INTERFACE

STEREO

(8 )





A-4









  

 

H/P

ANTENNA IN

(RGB)

SPEAKER

OUT

VOLUME

CONTROL

RJP

INTERFACE

1

2

/DVI IN

STEREO

(8 )







 















































































































 

A-5

PREPARATION



■ Image shown may differ from your TV

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,

the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,

the bolt can deviate from abrasion of the tightening part of the bolt.

Carefully place the TV screen side down

on a cushioned surface to protect the

screen from damage.

Carefully place the TV screen side down

on a cushioned surface to protect the

screen from damage.

11

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in

the back of the TV.

2

3



A-6



PREPARATION



■ Image shown may differ from your TV.



►Do not use the  to lift the TV.

- If the TV is dropped, you may be injured or the TV may be damaged.



Connect the cables as nec-

essary.

To connect additional equip-

ment, see the 

 sec-

tion.

Open the



as

shown.

Cable Management Clip

Fit the



as shown.



Connect the cables as nec-

essary.

To connect additional equip-

ment, see the 

 sec-

tion.

Install the as shown.

Cable Management Clip

Fit the



as shown.

Hold the

 



with both hands and pull it

backward.







1

2

3

1

2

3



A-7

PREPARATION

■ Image shown may differ from your TV.

When installing the wall-mounted unit, use the protection cover.





Insert the 

 into the TV until

clicking sound.

Fix the 4 bolts securely using the holes in

the back of the TV.

5



Protection Cover

1

3

4

Carefully place the TV screen side down on

a cushioned surface to protect the screen

from damage.

2

Loose the bolts from TV.

Detach the stand from TV.

Insert the  into the TV.

Protection Cover







Fix the set-top box to the TV and use it when

you want to.

After removing the protection paper

from the Dual Lock, stick it to the TV

and the set-top box as shown.

Attach the set-top box to the TV by press-

ing the Velcro strips together.

1

2

A-8



PREPARATION



Desk

Stand

■ Image shown may differ from your TV.

The TV must be attached to desk so it cannot

be pulled in a forward/backward direction,

potentially causing injury or damaging the

product.



►To prevent TV from falling over, the TV

should be securely attached to the floor/wall

per installation instructions. Tipping, shaking,

or rocking the machine may cause injury.

1-Screw

( provided as parts of the product)







■ Image shown may differ from your TV.

After installing the TV, you can adjust the TV set

manually to the left or right direction by 20

degrees to suit your viewing position.



Bolt

Secure the power cable with the  

and the bolt as shown. It will help prevent the power

cable from being removed by accident.









■ Image shown may differ from your TV.

■ Adjust the position of the panel in various ways

for maximum comfort.

• Tilt range

12

0

3

0



►

Screw: M5 x L (*L: Table depth + 8~10 mm)

ex) Table depth: 15mm, Screw: M5 x 25

4-Screws

(not provided as parts of the product)

Stand

Desk

A-9

PREPARATION

■ This feature is not available for all models.

■ Image shown may differ from your TV.





2





■ You should purchase necessary components

to fix the TV safety and secure to the wall on

the market.

■ Position the TV close to the wall to avoid the

possibility of it falling when pushed.

■ The instructions shown below are a safer way

to set up the TV, by fixing it to the wall, avoid-

ing the possibility of it falling forwards if pulled.

This will prevent the TV from falling forward

and causing injury. This will also prevent the

TV from damage. Ensure that children do not

climb or hang from the TV.

3

Use the eye-bolts or TV brackets/bolts to fix the

product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen

then bolts.)

* Insert the eye-bolts or TV brackets/bolts and

tighten them securely in the upper holes.

Secure the wall brackets with the bolts on

the wall. Match the height of the bracket

that is mounted on the wall.

Use a sturdy rope to tie the product for align-

ment. It is safer to tie the rope so it becomes

horizontal between the wall and the product.

2

1

The TV is equipped with a Kensington Security

System connector on the back panel. Connect

the Kensington Security System cable as shown

below.

For the detailed installation and use of the

Kensington Security System, refer to the user’s

guide provided with the Kensington Security

System.

For further information, contact http://www.kens-

ington.com, the internet homepage of the

Kensington

company. Kensington sells security systems for

expensive electronic equipment such as note-

book PCs and LCD projectors.

1

2

3



►When moving the TV undo the cords first.

►Use a platform or cabinet strong and large

enough to support the size and weight of the

TV.

►To use the TV safely make sure that the

height of the bracket on the wall and on the

TV is the same.



► The Kensington Security System is an

optional accessory.

► If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on.

This is normal, there is nothing wrong with

TV.

► Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the monitor's performance.

► Avoid touching the LCD screen or holding

your finger(s) against it for long periods of

time. Doing so may produce some temporary

distortion effects on the screen.

2

A-10



PREPARATION

■ The TV can be installed in various ways such as

on a wall, or on a desktop etc.

■ The TV is designed to be mounted horizontally.

Power Supply

Circuit breaker











■ We recommend the use of a LG Brand wall

mounting bracket when mounting the TV to a

wall.

■ We recommend that you purchase a wall

mounting bracket which supports VESA stan-

dard.

■ LG recommends that wall mounting be per-

formed by a qualified professional installer.

10 cm

For adequate ventilation allow a clearance of 10

cm all around the TV.

AA

BB

AA

Model

VESA

(A

*

B)

Standard

Screw

Quantity

19/22LH2

***

26/32LH2

***

37/42LH2***

100

*

100

200

*

100

200

*

200

M4

M6

4

10 cm



► Should Install wall mount on a solid wall per-

pendicular to the floor.

► Should use a special wall mount, if you want to

install it to ceiling or slanted wall.

► The surface that wall mount is to be mounted

on should be of sufficient strength to support

the weight of TV set; e.g. concrete, natural

rock, brick and hollow block.

► Installing screw type and length depends on

the wall mount used. Further

information, refer

to the instructions included with the mount.

► LG is not liable for any accidents or damage to

property or TV due to incorrect installation:

- Where a non-compliant VESA wall mount is

used.

- Incorrect fastening of screws to surface

which may cause TV to fall and cause per-

sonal injury.

- Not following the recommended Installation

method.

■ Image shown may differ from your TV.

Ensure that you connect the earth wire to prevent

possible electric shock. If grounding methods are

not possible, have a qualified electrician install a

separate circuit breaker.

Do not try to earth the TV by connecting it to tele-

phone wires, lightening rods or gas pipes.

A-11

PREPARATION



When using the remote control, aim it at the remote control sensor on the TV.

Image shown may differ from your TV.

(POWER)

ENERGY

SAVING

AV MODE

INPUT

TV/RAD

Switches the TV on from standby or off to standby.

Adjust the Energy Saving mode of the TV.(►

)

It helps you select and set images and sounds

when connecting AV devices.(►

)

External input mode rotate in regular sequence.

(

►



)

Selects Radio, TV and DTV channel.

0 to 9 number

button

LIST

Q.VIEW

Selects a programme.

Selects numbered items in a menu.

Displays the programme table.

(

►



Returns to the previously viewed programme.

MENU

GUIDE

Q. MENU

BACK

EXIT

INFO i

THUMBSTICK

(Up/Down/Left/Right)

OK

Selects a menu.

Clears all on-screen displays and returns to TV

viewing from any menu.

(

►

)

Shows programme guide.

(

►

)

Select the desired quick menu source. (Aspect

Ratio, Clear Voice II , Picture Mode, Sound Mode,

Audio (or Audio Language), Sleep Timer, Skip Off/

On, USB Device).(►

)

Allows the user to move return one step in an inter-

active application, EPG or other user interaction

function.

Clears all on-screen displays and returns to TV

viewing from any menu.

Shows the present screen information.

Allows you to navigate the on-screen menus and

adjust the system settings to your preference.

Accepts your selection or displays the current

mode.

Coloured

buttons

These buttons are used for teletext (on 

models only), .

TELETEXT

BUTTONS

SUBTITLE

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.(►



)

Recalls your preferred subtitle in digital mode.



A-12



PREPARATION

VOLUME UP

/DOWN

FAV

MARK

RATIO

MUTE

Programme

UP/DOWN

PAGE UP/

DOWN

Adjusts the volume.

Displays the selected favourite programme.

Select the input to apply the Picture Wizard

settings.

Check and un-check programmes in the USB

menu.

Selects your desired Aspect Ratio of picture.

(►

)

Switches the sound on or off.

Selects a programme.

Move from one full set of screen information to the

next one.



■ Open the battery compartment cover on the back and install

the batteries matching correct polarity (+with +,-with -).

■ Install two 1.5 V AAA batteries. Do not mix old or used batter-

ies with new ones.

■ Close cover.

■ To remove the batteries, perform the installation actions in

reverse.

SIMPLINK /

MY MEDIA Menu

control buttons

Controls SIMPLINK or MY MEDIA menu(Photo List

and Music List).

See a list of AV devices connected to TV.

When you toggle this button, the Simplink menu

appears at the screen.(►

)

A-13

PREPARATION



When using the remote control, aim it at the remote control sensor on the TV.

Image shown may differ from your TV.

AV MODE

ENERGY SAVING

RETURN / EXIT

MENU

Q.MENU INFO GUIDE

i

MUTE

POWER

LIST

Q.VIEW

MARK

FAV

TV/RAD

AV MODE

(POWER)

INPUT

ENERGY

SAVING

Selects Radio, TV and DTV channel.

It helps you select and set images and sounds

when connecting AV devices.(►

)

Switches the TV on from standby or off to standby.

External input mode rotate in regular sequence.

(

►

)

Adjust the Energy Saving mode of the TV. (►)

0 to 9 number

button

Q.VIEW

LIST

Selects a programme.

Selects numbered items in a menu.

Returns to the previously viewed programme.

Displays the programme table.

(

►

)

THUMBSTICK

(Up/Down/Left/Right)

OK

MENU

RETURN/EXIT

Allows you to navigate the on-screen menus and

adjust the system settings to your preference.

Accepts your selection or displays the current

mode.

Selects a menu.

Clears all on-screen displays and returns to TV

viewing from any menu.(►

)

Allows the user to move return one step in an inter-

active application, EPG or other user interaction

function.

Coloured

buttons

These buttons are used for teletext (on 

models only) , .

TELETEXT

BUTTONS

SUBTITLE

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

(►

)

Recalls your preferred subtitle in digital mode.

See a list of AV devices connected to TV.

When you toggle this button, the Simplink menu

appears at the screen.(►

)



A-14



PREPARATION

AV MODE

ENERGY SAVING

RETURN / EXIT

MENU

Q.MENU INFO GUIDE

i

MUTE

POWER

LIST

Q.VIEW

MARK

FAV

VOLUME UP

/DOWN

MUTE

Programme

UP/DOWN

PAGE UP/

DOWN

Adjusts the volume.

Switches the sound on or off.

Selects a programme.

Move from one full set of screen information to the

next one.

Q. MENU

INFO i

GUIDE

FAV

MARK

Select the desired quick menu source. (Aspect

Ratio, Clear Voice II , Picture Mode, Sound Mode,

Audio (or

Audio Language)

, Sleep Timer, Skip Off/

On, USB Device).

(

►

)

Shows the present screen information.

Shows programme schedule.(►

)

Displays the selected favourite programme.

Check and un-check programmes in the USB

menu.



■ Loose the bolt on battery compartment cover.

■ Open the battery compartment cover on the back and install the

batteries matching correct polarity (+with +,-with -).

■ Install two 1.5V AAA batteries. Do not mix old or used batteries

with new ones.

■ Close cover.

■ To remove the batteries, perform the installation actions in

reverse.

SIMPLINK /

MY MEDIA Menu

control buttons

Controls SIMPLINK or MY MEDIA menu(Photo List,

Music List, Movie List).



EXTERNAL EQUIPMENT SETUP





■ For optimum picture quality, adjust antenna direction.

■ An antenna cable and converter are not supplied.

■ To prevent damage do not connect to the mains outlet until all connections are made between the

devices.

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)













RF Coaxial Wire (75

Ω)











■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier

to the antenna as shown above.

■ If signal needs to be split for two TVs,use an antenna signal splitter for connection.

USB IN

SERVICE ONLY

RS-232C IN

(

CONTROL&SERVICE)

AUDIO IN

(RGB/DVI)

OPTICAL DIGITAL AUDIO OUT

ANTENNA/

CABLE IN

VIDEO

AUDIO

RGB IN (PC)

VIDEO AUDIO

L(MONO)

R

2

1

(DVI)

AV IN

COMPONENT IN

L R

/DVI IN

COMPONENT IN

AUDIO

VIDEO

L(MONO)

R

AUDIO

AV IN

VIDEO

IN

OUT

VARIABLE AUDIO OUT

ANTENNA IN

HDMI/DVI IN

RGB IN

(PC)

RS-232C IN

(CONTROL)

AUDIO IN

(RGB/DVI)

USB IN

SERVICE ONLY

AUDIO

VIDEO

L(MONO)

R

AUDIO

AV

VIDEO

IN1

OUT

VARIABLE AUDIO OUT

ANTENNA

IN

HDMI

/DVI IN

RGB IN

(PC)

RS-232C IN

(CONTROL)

AUDIO IN

(RGB/DVI)

USB IN

SERVICE ONLY

1

HDMI

1

2

AV IN2

IN 3

COMPONENT IN





EXTERNAL EQUIPMENT SETUP



■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting

all equipment.

■ This section on  mainly uses diagrams for the 32LH2

***

models.

■ Image shown may differ from your TV.

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do

receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as

shown below.

► HDMI Audio Supported format : Dolby Digital, PCM

DTS Audio format is not supported.



To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Signal Component HDMI

480i/576i O X

480p/576p O O

720p/1080i O O

1080p

O

(50 Hz / 60 Hz only)

O

(24 Hz / 30 Hz /

50 Hz / 60 Hz)

Component ports on the TV Y PB PR

Video output ports

on DVD player

Y P

B PR

Y B-Y R-Y

Y Cb Cr

Y Pb Pr

1

Connect the video outputs

(

Y, PB, PR

)

of the

external equipment (digital set-top box, DVD,

etc.) to the  jacks on

the TV.

2

Connect the audio output of the external equip-

ment (digital set-top box, DVD, etc.) to the

 jacks on the TV.

3

Turn on the external equipment.

(

Refer to the external equipment's manual for

operating instructions.)

4

Select the input source using the

 button on the remote control.

ANTENNA

IN

(

RGB

)

S

PEAKER

OUT

VOLUME CONTROL

1

2

/

DVI IN

STEREO

(8 )





Page is loading ...

LG 42LH200H, 32LH200H, 37LH200H, 42LH250C User manual

Related papers

Other documents