7 "
SAFETY WARNINGS!
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton.
Do not remove warning label from bed.
2- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
of entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure that the guardrail, ladder and other components are in their proper position,
free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8- Always use the ladder for entering and leaving the upper bunk.
9- Do not use substitute parts. Contact distributor or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.
12- Always use guardrails on both long sides of the upper bunk.
13- The use of water or sleep flotation mattresses is prohibited.
14- Keep these instructions for future reference.
15- Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
Inst ctio s
n
ru
st tio
cs
n
ru
total thickness must not exceed
inches. Do not use mattress without the proper bunkie board or safe
foundation.
Note:There must be at least 5" inches from top surface of mattress to top edge or guardrails.
TO OBTAIN PARTS, PLEASE CONTACT:
This bed is designed to use a twin mattress ( 37 ½”- 38 ½”x 74 - 75") and bunkie board (37 ½"x 74"). The
REPLACEMENT PARTS.
Replacement parts, including additional guardrails, may be obtained from place of purchase or original
distributor.
DONCO TRADING COMPANY- FORT WORTH, TEXAS
Thank you for purchasing this quality product.
Be sure to check all packing materials carefully
for small parts which may have come loose
inside the carton during shipment. Separate,
identify and count all parts and hardware.
Compare with the parts list to be sure all parts
are present.
´´DO NOT TIGHTEN SCREWS
UNTIL COMPLETELY ASSEMBLED´´
ASSEMBLY INSTRUCTIONS
1573 BELLAIRE BUNK BED KD
SIZE OF MATTRESS AND FOUNDATION (SUPPORT)
HARDWARE
1573 BELLAIRE BUNK BED KD
page 2 of 8
09
45
4,0 x 30 Screw
Half Moon
1/4" 16
A
H
16
08
24
12
01
B
E
F
G
C
D
17mm 7 x 60mm
10 x 40mm
17mm 7 x 100mm
17mm 1/4 x 70mm
17mm 1/4 x 110mm
1
2
12
6
11
11
11
1
3
4
5
4
5
5
7
6
9
9
4
5
10
10
10 8
8
74
5
5
WARNING
LABELS
POST NUMBER HERE
x2
x3
x5
x2
x2
x3
x2
7
88
11
5
5
4
4
9
88
66
7
G
G
G
G
G
G
G
G
G
G
G
GG
G
G
G
G
G
GG
10 x 40
G
01
45
D+C
D+C
D+H
D+C
D+H
H+D
C+D
H+D
C+D
C+D
C
D
4
4
4
5
5
2
1
5
02
01
D
page 3 of 8
04
C06
17mm 7 x 100mm
Half Moon
1/4"
H
04
B
B
17mm 1/4 x 110mm
H
BB
B
B
B
B
FOOTBOARD
FRONT SIDE RAILS WHITH HOLES
WARNING
LABELS
INSIDE
POST NUMBER HERE
(-) Space
Top
HOLE ON EDGE UP
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
03
H+D
C+D
H+D
C+D
C+D
D+C
D+C
D+H
D+C
D+H
1
3
5
5
5
4
4
C
A
D
D
A04
04
01
B
D
17mm 1/4 X 70
04
6
7
A
A
A
Half Moon
B
BB
1/4"
x2 x2
x2
x2
D
D
page 4 of 8
01
D
04
C06
17mm 7 x 100mm
Half Moon
1/4"
H
04
B
B
B
B
B
17mm 1/4 x 110mm
H
BB
4
B
HEADBOARD
POST NUMBER HERE
INSIDE
ATTENTION
WARNING
LABELS
(-) Space
Top
HOLE ON EDGE UP
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
05
A
A
A
B
x2
x2
7
6
B
B
x2
x2
D
D
A
A
04
04
04
04
01
01
B
B
D
D
17mm 1/4 X 70
17mm 1/4 X 70
Half Moon
Half Moon
1/4"
1/4"
A
D
7
A
B
Ax2
Ax2
B
B
x2
x2
06
D
D
7
ATTENTION
page 5 of 8
DO NOT TIGHTEN TOTALLY THE SCREWS/BOLTS
UNTIL TO ASSEMBLE THE PARTS # 8
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
AB
Ax2
Ax2
6
B
B
x2
x2
07
D
D
A
F
04
02
04
01
01
B
D
D
17mm 1/4 X 70
17mm 7 X 60
Half Moon
1/4"
08
F+D
F+D
12
page 6 of 8
F
D
ATTENTION
DO NOT TIGHTEN TOTALLY THE SCREWS/BOLTS
UNTIL TO ASSEMBLE THE PARTS # 8
09
10
D+F
D+F
F+D
F+D
88
F
D
page 7 of 8
F04
01
D
17mm 7 X 60
F04
01
D
17mm 7 X 60
D+F
D+F
D+F
D+F
F
D
99
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
page 8 of 8
11
E
E
E
E
E
E
E
E
E
09
4,0 x 30 Screw
E
11
11
11
F+D
F+D
F+D
D+F
D+F
D+F
F
D
F06
01
D
17mm 7 X 60
10
10
10
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
12
PLEASE TIGHTEN COMPLETELY
ALL SCREWS / BOLTS NOW
13
OPTIONAL SLATS
Not included in the bed box
/
