Pepperl+Fuchs IUA-F860-FR1 Operating instructions

Brief Instructions

IUA-F860-FR* Mounting Instructions 1

Refer to "General Notes Relating to Pepperl+Fuchs Product Information"

Pepperl+Fuchs Group Tel: +49 621 776-0

www.pepperl-fuchs.com E-Mail: inf[email protected].com

IUA-F860-FR* Mounting Instructions

Mounting

The antenna is designed to be mounted outdoors. Four holes for M5 screws are provided on the backside of the housing for

mounting on a VESA bracket. The screws used should have a screw-in depth of maximum 12 mm (0.45"). For secondary protec-

tion the antenna can be secured with an eyebolt, see Fig. 1. Fix the eyebolt with threadlocker. Secure the antenna e.g. with a wire

rope.

You can find suitable accessories at Pepperl-Fuchs.com

Figure 1 Back view

Figure 2 Side view

Warning!

Damage, loss of performance

The minimum bending radius of the antenna cable of 22 mm static and 44 mm dynamic must not be exceeded to avoid damage

and reduction of the antenna performance.

In order to maintain the full protection class and to prevent loss of performance of the antenna, the pressure compensation ele-

ment must not be damaged under any circumstances.

This manual is also suitable for

Download PDF