1of2
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Crossbar
Assembly
x1
A
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
D
Crossbar Assembly Wiring
Table of
Contents
STEP 1 STEP 2
Fixture Body
STEP 3
Outlet Box Screw
x2
B
Wire Connector
x3
C
LightSource
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
4BULBSREQUIRED
BULBSNOTINCLUDED
E
Optional
Candle Cover
x4
Installation Instructions: UQL4131
www.urbanambiance.com