2. urban ambiance
  3. UQL4131

urban ambiance UQL4131 Installation guide

  • I am a chat assistant, and I have reviewed the provided installation instructions for the urban ambiance Light Fixture UQL4131. This document details the tools and parts required for installation, including warnings, a list of included and optional parts and a step-by-step process. I'm ready to answer any questions you might have about the installation procedure or the light fixture itself.
  • What type of bulbs are required for this fixture?
    Are the bulbs included with the fixture?
    What should I do before starting the installation?
1of2
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Crossbar
Assembly
x1
A
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
D
Crossbar Assembly Wiring
Table of
Contents
STEP 1 STEP 2
Fixture Body
STEP 3
Outlet Box Screw
x2
B
Wire Connector
x3
C
LightSource
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
4BULBSREQUIRED
BULBSNOTINCLUDED
E
Optional
Candle Cover
x4
Installation Instructions: UQL4131
www.urbanambiance.com
STEP 1
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting backplate to mounting screws
2of2
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
www.urbanambiance.com
/