LG DS75QR User manual

Type
User manual
OWNER’S MANUAL
WIRELESS
SOUND BAR
Please read this manual carefully before operating your set and retain it for future
reference.
Model
DS75QR (DS75QR, SPQ7-W), SPQ8-S (SPQ8-S, S78S2-S)
2310_Rev03
www.lg.com
Copyright © 2022-2023 LG Electronics Inc. All Rights Reserved.
2
Sound Bar Quick Guide
Installing and using the Product
a Connect the sound bar to your TV via an optical cable or an HDMI
cable.
HDMI OUT
aa
b
HDMI IN
(ARC)
OPTICAL
OUT
HDMI IN
c
c
c
D
E
C
B
A
C
A Sound bar
B Remote Control Receiver / Status Display
C Rear Speakers / Wireless Receiver
D Wireless Subwoofer - Install it close to the sound bar.
E External Device - (Blu-ray player, game console, etc.)
Soundbar Quick Guide
3
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an
HDMI cable.
c Connect to power in the following order: wireless subwoofer [ wireless receiver [ sound bar. Then, turn on
the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless
subwoofer and the wireless receiver will light up green. ([ See “Connecting the Product” on page 6.)
d Using the product with your TV ([ See “Connecting with an
Optical Cable”, “Connecting with LG Sound Sync (Wireless)”,
“Connecting with an HDMI Cable” on page 32, 34, 35.)
A Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
B On your TV's settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
C When the TV is properly connected to the product, “OPT”, ARC, or “E-ARC” will appear on the status display
with a sound.
e Connecting the product to your smartphone via Bluetooth ([
See “Connecting via Bluetooth” on page 40.)
A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function.
( Off > On)
B Press the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.
C Find and tap the product on your smartphone. The product appears as “LG DS75QR (XX).
D When the product is connected to your smartphone via Bluetooth, you can see the status display change
from “PAIRED[Connected Bluetooth device name[BT”.
f Connecting to the LG Sound Bar app ([ See “Connecting with a
Smartphone via LG Sound Bar app” on page 43.)
A Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
B You can get more information regarding its use by selecting [Help] in [Setting].
4
Manually connecting the sound bar to the wireless subwoofer or wireless
receiver ([ See “Connecting the wireless subwoofer manually”, “Manual
connection” on page 8, 10.)
If you see a red LED on the back of the wireless subwoofer or on the front of the wireless receiver, it means
that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.
A Press the Power button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless subwoofer or wireless receiver.
Check if each LED blinks green.
- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the
back of the subwoofer again.
C Press the Power button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the back of the wireless
subwoofer or on the front of the wireless receiver light up green.
5
Table of Contents
Sound Bar Quick Guide
2 Installing and using the Product
Installation
6 Connecting the Product
12 Enjoying enhanced sound
Exploring the Product
20 Front
22 Back
23 Exploring Remote Control
Connecting to the TV
32 Connecting with an Optical Cable
34 Connecting with LG Sound Sync (Wireless)
35 Connecting with an HDMI Cable
Connecting to an External Device
37 Connecting with an HDMI Cable
39 Connecting with an Optical Cable
Using the Product as an Audio
System
40 Connecting via Bluetooth
43 Connecting with a Smartphone via LG Sound
Bar app
45 Connecting to a USB Storage Device
Mounting the Product to a Wall
47 Checking before mounting to a wall
49 Mounting the Product to a Wall
Safety Precautions
51 Safety and Regulatory
Before Reporting Product
Malfunction
54 Troubleshooting
Appendix
57 Specications
59 Registered Trademarks and Licenses
61 Open Source Software Notice Information
61 Handling the Product
6
Installation
Connecting the Product
You can enjoy a richer sound by connecting the sound bar to the wireless subwoofer.
Connecting the wireless subwoofer automatically
After completing installation, the wireless subwoofer will automatically be connected to the sound bar. Connect
the sound bar to the subwoofer in the following order.
a Plug the power cable into the wireless subwoofer.
b Plug the power cable connected to the wireless subwoofer into an outlet.
c Plug the power cable into the AC adapter.
d Connect the AC adapter cable to the DC IN (AC adapter input) terminal on the back of the product.
e Plug the power cable connected to the AC adapter into an outlet.
f When the connection is automatically established, you will see the LED on the back of the wireless subwoofer
light up green.
Note
• Make sure to use the provided AC adapter. Using other AC adapters may lead to malfunction and will forfeit the
product warranty.
Installation
7
Checking the connection with the LED on the back of the wireless
subwoofer
You can check the connection status by looking at the LED on the back of the wireless subwoofer.
LED Colour Status
Blinking green Connecting in progress
Green Connected successfully
Red Bad connection, or the subwoofer is in standby
Off Power cable not connected
8
Connecting the wireless subwoofer manually
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the
subwoofer. If this is the case, connect them in the following order.
a Press the Power button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless subwoofer. Check if the LED on the back of the
subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on
the back of the subwoofer again.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the back of the wireless subwoofer light up
green.
Note
• Install the sound bar as close to the wireless subwoofer as possible. The closer the distance between the sound
bar and the wireless subwoofer, the better the sound quality.
• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless
subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,
microwave ovens, etc.).
9
Connecting the rear speakers to the wireless receiver
Automatic connection
After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the
sound bar to the wireless receiver in the following order.
a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the
black striped cable to the negative terminal and the other cable to the positive terminal.
b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.
Receiver Terminal Colour Speaker Position
Blue L Left rear
Grey R Right rear
c Plug the power cable into the wireless receiver.
d Plug the power cable connected to the wireless receiver into an outlet.
e Press the Power button on the sound bar to turn it on.
f When the connection is automatically established, you will see the LED on the front of the wireless receiver
light up green.
Note
• Please only use the speakers provided with the product. Using other speakers may cause malfunction.
• Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive
terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound
or produce no bass.
10
Checking connection status with the LED colour
You can check the connection status with the LED on the front of the wireless receiver.
LED Colour Status
Blinking green Connecting In progress
Green Connected successfully
Red Bad connection, or the receiver is in standby
Off Power cable not connected
Manual connection
If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the
receiver. If this is the case, connect them in the following order.
a Press the Power button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless
receiver is blinking green.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the front of the wireless receiver light up
green.
Note
• Keep the rear speakers at least 30 cm away from the TV or monitor.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless
receiver and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,
microwave ovens, etc.).
11
Attaching the ferrite core (optional)
A ferrite core may not be provided depending on national standards.
Attaching the ferrite core to the speaker cables
Attach the ferrite core to the cables to reduce radio noise.
a Pull Part [a] to open the ferrite core.
b Wind the wireless receiver's speaker cables twice around the ferrite core. A distance of about 18 cm is
required between the wireless receiver and the ferrite core.
c Close the ferrite core until you hear a click.
12
Enjoying enhanced sound
The surround sound function and the Multi-channel Experience allow you to hear immersive 3D sound produced
by multiple audio channels from the speakers, regardless of the channels in the originally recorded content.
For example, if you listen to music recorded in 2.0 channels with standard sound effects while the wireless rear
speakers are connected, you can hear the following difference.
When the surround sound is off
When the surround sound is on
Note
• Speaker positions are as follows.
A Front speakers
B Centre speaker
C Top speakers
D Subwoofer
E Rear speakers
13
Setting up surround sound
a Press Settings button. The product enters the setting mode and you can see “OFF-AUTO POWER” or
ON-AUTO POWER”.
OFF-AUTO POWER
b While the “OFF-AUTO POWER” or “ON-AUTO POWER” is scrolling in the status display, press Left/
Right button to select the surround sound setting. You can see the status of the surround sound, “OFF-
SURROUND” or “ON-SURROUND”.
OFF-AUTO POWER
OFF-SURROUND
OFF-NIGHT TIME
OFF-TV REMOTE
c While the “OFF-SURROUND” or “ON-SURROUND” is scrolling in the status display, press Up/Down
button to turn on or off the surround sound.
OFF-SURROUND ON-SURROUND
14
Using Multi-channel Experience
Playssoundfromallspeakerstoenhancesurroundsoundregardlessofthechannelcongurationoftheinput
source.
You can control this function on the LG Sound Bar app.
Note
• It may not work depending on the selected sound effect.
15
Surround sound function ON
When the surround sound function is turned on, sound is output from all connected speakers regardless of
whether the Multi-channel Experience is turned on or off.
Sound Effects
Input Output
Rear speakers not connected Rear speakers connected
All Sound Effects
2.0 channels
5.1 channels or more
16
Surround sound function OFF
When the surround sound function is turned off, sound is output differently from the connected speakers
depending on whether the Multi-channel Experience is turned on or off.
Multi-channel Experience ON
Sound Effects
Input Output
Rear speakers not connected Rear speakers connected
AI SOUND PRO
Soundcustomisedwitharticialintelligence
2.0 channels
5.1 channels or more
STANDARD
You can enjoy optimised sound.
2.0 channels
5.1 channels or more
CINEMA
Cinematic 3D sound
2.0 channels
5.1 channels or more
CLEAR VOICE PRO
Voice sound clear, improving the quality of voice sound
2.0 channels
5.1 channels or more
17
Sound Effects
Input Output
Rear speakers not connected Rear speakers connected
SPORTS
Realistic sound like in a stadium
2.0 channels
5.1 channels or more
MUSIC
Sound enriched with MERIDIAN technology
2.0 channels
5.1 channels or more
GAME
Optimised sound for game
2.0 channels
5.1 channels or more
BASS BLAST (BASS BLAST+)
Sound with reinforced bass
2.0 channels
5.1 channels or more
18
Multi-channel Experience OFF
Sound Effects
Input Output
Rear speakers not connected Rear speakers connected
AI SOUND PRO
Soundcustomisedwitharticialintelligence
2.0 channels
5.1 channels or more
STANDARD
You can enjoy optimised sound.
2.0 channels
5.1 channels or more
CINEMA
Cinematic 3D sound
2.0 channels
5.1 channels or more
CLEAR VOICE PRO
Voice sound clear, improving the quality of voice sound
2.0 channels
5.1 channels or more
19
Sound Effects
Input Output
Rear speakers not connected Rear speakers connected
SPORTS
Realistic sound like in a stadium
2.0 channels
5.1 channels or more
MUSIC
Sound enriched with MERIDIAN technology
2.0 channels
5.1 channels or more
GAME
Optimised sound for game
2.0 channels
5.1 channels or more
BASS BLAST (BASS BLAST+)
Sound with reinforced bass
2.0 channels
5.1 channels or more
20
Exploring the Product
Front
a
aPower
This turns the product on/off.
Function
Press the button repeatedly to select the desired function or input mode.
• OPT/HDMI ARC: Connects the product to a TV that supports an optical cable, ARC, E-ARC, or LG
Sound Sync
• BT: Connects the product via Bluetooth
• LG TV: Connects the product to a TV that supports LG Sound Sync (Wireless)
• HDMI: Connects the product to an HDMI input port
• USB: Connects the product to a USB storage device
Volume
Adjusts the sound volume.
Bluetooth pair
It allows you to pair your Bluetooth device such as a smartphone to this product for three minutes. ([
See “Connecting via Bluetooth” on page 40.)
It allows you to pair your LG TV to this product for three minutes. ([ See “Connecting with LG Sound
Sync (Wireless)” on page 34.)
bRemote Control Receiver
This receives wireless signals from the remote control.
cStatus display
Options such as input mode and volume are displayed in text.
• The status display can be controlled as auto, on, and off. ([ See “Using Display” on page 30.)
Exploring the Product
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62

LG DS75QR User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI