MILL OIL PREMIUM MEC 1000W OLJEOVN User manual

Assembly and instruction manual

Please read the instructions carefully before use.

Take good care of this manual for later use.

EN

DK

FI

NO

SE

This product is only suitable for well insulated spaces or occasional

use.

Dette produktet er kun egnet til godt isolerte rom eller ved

sporadisk bruk.

Dette produkt er kun egnet til godt isolerede rum eller leijlighedsvis

brug.

Denna produkt är endast lämplig för välisolerade utrymmen eller

sporadisk användning.

Tämä tuote soveltuu ainoastaan hyvin eristettyihin tiloihin tai

satunnaiseen käyttöön.

Series:

Gentle Air oil

ﬁlled radiator

Thanks for buying Mill

Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution

sell to many of the largest retailers in the Nordic countries.

In 2010, Cato’s son, Philip joined the company. Philip looked at the heating industry

with fresh new eyes and wondered why there had been so little change with the

appearance of portable heaters in the last 20 years, especially since interior design in

general had changed dramatically over the years. Philip thought consumers should

have more styles to choose from other than the typical old-fashioned, traditional

heaters.

Since heaters are part of so many homes, Philip and Cato decided to use their

extensive knowledge to re-invent the design of heaters. They wanted to create

beautiful, modern and minimalistic heaters, using the most advanced technology, that

would complement people’s homes. They launched the brand “Mill” in 2012.

to complement our line of products to meet consumers’ demand.

Prospering on our success in the Nordics we decided to promote Mill at some of the

world’s largest electronic fairs and home shows in 2015 and 2016 - the feedback from

retailers and distributors all over the world were amazing. We are proud to say that

consumers in over 25 countries can now keep warm with style!

Follow us on social media:

@millheat

millheat.com

1

millheat.com

EN

Content

P. 2-3

P. 4

P. 5

P. 6

P. 7

P. 8

P. 9

P. 10

P. 11

Important safety information

First use

Description of heater

Parts

Assembly

Instructions mechanical thermostat

Usage mechanical thermostat

Instructions day/night thermostat

Usage day/night thermostat

Timer function

Day- and nighttime setback

How to activate daytime setback

How to activate nighttime setback

Change setback temperature – daytime

Change setback temperature – nighttime

Change number of hours – daytime

Change number of hours – nighttime

Cancel (skip) setback period

Delete setback program

Temperature calibration

Resetting the heater

Memory function

Maintenance

Warranty

Waste disposal

|

Please read the instructions carefully before use.

Take good care of this manual for later use.

IN ORDER TO AVOID OVERHEATING,

DO NOT COVER THE HEATER.

STORE THIS INSTRUCTION

MANUAL FOR FUTURE USE!

NEVER TOUCH YOUR HEATER OR ITS

CASING WITH WET HANDS!

2

EN

You must obey common safety guidelines when using electrical

products, especially in the presence of children.

WARNING! To avoid electric shock or damage due to

the heat, always make sure the plug is pulled out before

the heater is moved or cleaned.

READ THE INSTRUCTIONS CAREFULLY

• The product is intended for home use only.

• Make sure the heater is connected to the house's regular

mains as indicated on the heater.

•

• Check for any pieces of packing foam or cardboard that may

have fallen into the heating elements of the heater. These

pieces must be removed to avoid unpleasant odors.

• Prevent the heater from overheating – do not cover.

• long period of time.

• Pay special attention if the heater is used in rooms where

children, the handicapped or elderly reside.

• The heater should not be set up directly beneath an electrical

socket outlet.

• The cord must not be laid under any kind of carpet. Make sure

the cord is laid in such a way that nobody can trip on it.

• The heater must not be used if either the cord or plug is

damaged. The heater must not be used if it has been

dropped on the ﬂoor or is damaged in any other way causing

it to malfunction.

• The cord must be repaired by the manufacturer or by an expert

if it has been damaged, to avoid dangerous situations.

• Avoid using extension cords, which may overheat and could

• hazards by making sure the air intakes are not blocked or

Important safety information

3

millheat.com

EN

• The heater should not be installed in close proximity to

• The heater must never be used in rooms where gasoline, paint

or other ﬂammable liquids are stored, such as in a garage.

• Never touch an electric heater with wet hands. The heater

should be installed so a person showering or taking a bath

cannot come into direct contact with it.

• Some parts of this product can become very hot and cause

burns. Particular attention has to be given where children and

vulnerable people are present.

• heater must cool down before it is moved.

• Avoid overloading the mains (the circuit) where the heater is

connected. The heater may overload the electrical circuit if

other electrical devices are plugged into the same socket

outlet.

• Do not use this heater in small rooms when they are occupied

by persons not capable to leaving the room on their own,

unless constant supervision is provided.

• The product cannot be used by children under 8 years of age

and persons with reduced physical or mental abilities or lack

of experience and knowledge unless they have been given

supervision or instruction in the safe use of the product and

understand the hazards involved.

• Children should not play with the product. Cleaning and

maintenance should not be done by unsupervised children.

• Children under the age of 3 should be kept away from the

product, unless they are under constant supervision.

• Children aged 3 to 8 years are only permitted to turn the

product ON/OFF, assuming the heater is mounted according

to the assembly instructions and the children have received

instruction or supervision in the safe use of the product and

understand the hazards involved.

• Do not use this heater in the immediate surroundings of a

bath, a shower or a swimming pool.

WARNING! The heater must not be used if the glass panels are

damaged (applies to AB-H1000DN GLASS only).

EN

First use

Description of heater

during transport. Contact the retailer or importer if you discover any visible damages to

the product.

Keep the outer packaging to transport the heater in the future. If you want to dispose

the packaging, make sure it is done properly. Keep plastic bags away from children.

d period without use,

the heater can produce a burnt odor for a short time. This is normal.

Please read all the instructions carefully before use. Save the instruction manual for future

use.

It is also normal for the heater to make “sounds” when it warms up or cools down.

Please see table above for which models that have mechanical/day- and night

thermostats

Day/night thermostat

and Mechanical thermostat

Model Thermostat Color Amperage

Power

(W)

Mill Heat

Boost

AB-H1000MEC Mechanical White 220-240V~, 50-60Hz 1000 Yes

AB-H1000DN Day/night White 220-240V~, 50-60Hz 1000 Yes

AB-H1500DN Day/night White 220-240V~, 50-60Hz 1500 Yes

AB-H2000DN Day/night White 220-240V~, 50-60Hz 2000 Yes

AB-H1000DN GLASS Day/night Glass 220-240V~, 50-60Hz 1000 Yes

AB-H1000DN BLACK Day/night Black 220-240V~, 50-60Hz 1000 Ye s

A B C

1. Heat emission

2. LED display

3. Control panel

4. Output selector and thermostat

5. ON/OFF

6. Legs (aluminium)

1. Heat emission

2. Indicator light

3. Thermostat

4. Output selector

5. Legs (aluminium)

4

5

millheat.com

EN

Parts

Assembly

Instructions mechanical thermostat

1. 2 rails for the feet

2. 2 foot brackets

3. 8 screws (pre-mounted)

1. Remove the pre-mounted screws on both legs before you insert them into the

brackets, so that you get a stable foot.

2. Attach the legs to the brackets by tightening 2 screws into each bracket.

3. Remove the pre-mounted screws from the bottom of the heater and place the

heater gently on its head to mount the feet.

4. Two screws must be fastened on each foot bracket.

5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.

Please see table on page 4 for which models that have mechanical thermostats

Control panel

1. Indicator light

2. Thermostat: Adjust the desired heat setting

3. Output selector:

0: OFF

I: Low

II: Medium

III: High

WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE

INSTRUCTIONS BEFORE USING THE HEATER!

6

EN

Usage mechanical thermostat

1. Set the output selector to the OFF position (0) and the thermostat to minimum.

Plug the heater into a grounded outlet.

2. Set the output selector to position |, || or |||. Turn the thermostat up to the maximum

position. When the desired room temperature has been reached, turn the

thermostat slowly down until you hear a click. The thermostat can now remain in

s soon as the room

temperature falls below this level, the heater will automatically switch on again.

When the room has again reached the desired temperature, the heater will switch

3. If you wish to change the room temperature, repeat the instructions in step 2.

4.

extremely hot.

5.

Please see table on page 4 for which models that have day- and night thermostats

Control panel

1. Standby

2. Daytime setback

3. Nighttime setback

4. Power indicator — Shows whether the heater is using power or not

5. Desired room temperature

6,7,8 Indicates the output level

9. Timer function

10. Daytime setback activation button

11. Nighttime setback activation button

12. Function button

13. Timer activation button

14. Thermostat and output selector:

i.

to the right to increase the temperature.

ii. Push the button to change the desired power level. 3 power levels

WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE

INSTRUCTIONS BEFORE USING THE HEATER!

Instructions day/night thermostat

If the temperature sensor is not functioning properly, you will see this

symbol on the display. Please contact the dealer or importer.

7

millheat.com

EN

Usage day/night thermostat

1. Plug the heater into a grounded outlet.

2. Press OFF/ON button.

3. Choose the desired power |, || or |||, by pressing the output selector. Turn the

thermostat to the desired temperature while looking at the display. As soon as the

room temperature drops below this level, the heater will automatically start again.

When the room has reached the desired temperature again, the heater will turn

4. The thermostat goes from 5 to 35°C.

5. If you want to change the temperature in the room, repeat step 3.

6.

extremely hot.

7.

for a longer period of time, pull out the plug.

Timer function

r of hours have passed.

Day- and nighttime setback

When programming the heater for either day- or nighttime setback, the setback

period will be active from the time you register the program. Which means; if you want

to start your daytime setback at 7.30 am, you need to register the program at 7.30 am.

You only need to program the heater 1 time for daytime setback and 1 time for

nighttime setback. If you have programmed the heater, the setback programs will be

active on the following days:

Daytime setback: Monday-Friday (day 1-5)

Nightime setback: All nights

EXAMPLE:

Let us say you want to program the heater for both daytime- and nighttime setback

(normally the heater is set to 23 degrees). You want the heater to do the following:

1. Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17

degrees

2. Nighttime setback activated from 10.00 pm to 6.00 am. Desired temperature: 18

degrees

8

EN

1. Tuesday 7.30 am you go to the heater and press on the heater’s control panel.

2. “d” will be visible in the display. Use the wheel to set what day it is today when

you are programming the heater (1= Monday, 2 = Tuesday etc.) You are not

programming the heater for the various days. This is simply to tell the heater what

day it is when you are programming the heater, since the daytime setback is active

3.

4.

5. The daytime setback will now be active from 7.30 am to 2.30 pm Monday-Friday.

Setback temperature is 17 degrees.

How to activate daytime setback

*Control light is green when the heater is in an active setback period. The control

light is red when the setback period is inactive but programmed.

How to activate nighttime setback

1. At 10.00 pm you go to the heater and press on the heater’s control panel.

2.

3.

4. The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The

setback temperature is 18 degrees.

*Control light is green when the heater is in an active setback period. The control

light is red when the setback period is inactive but programmed.

you will have to do this over again.

ATTENTION!

asked to register number of hours and temperature while programming. The standards

are as follows:

Daytime setback: 5 hours and 17 degrees

Nighttime setback: 7 hours and 17 degrees

Besides this they follow the same set up.

How to activate daytime setback

9

millheat.com

EN

Change setback temperature – daytime

Press and hold and press 3 times.

Enter the desired temperature for daytime setback. Save by pressing or wait for

Change number of hours – daytime

Press and hold and press 2 times.

Enter the desired number of hours for daytime setback. Save by pressing or wait

sheet

Change setback temperature – nighttime

Press and hold and press 3 times.

Enter the desired temperature for nighttime setback. Save by pressing or wait

Change number of hours – nighttime

Press and hold and press 2 times.

Enter the desired number of hours for nighttime setback. Save by pressing or

Cancel (skip) setback period

Press and hold and press or once (depending on which setback period

you want to cancel).

* The heater will skip an active setback period or the next setback period.

* During the next setback period, the heater will automatically resume the

programmed temperature reduction.

10

EN

Delete a setback program

Press and hold or (depending on which setback period you want to cancel)

for 3 seconds.

Temperature calibration

Resetting the heater

main switch.

It may occur deviation between the temperature registered by the heater and the

actual temperature in the room. This can be caused by several reasons, however, the

most common is that the heater is placed in a fair distance from where you usually

reside. When you set the temperature to for example 22 degrees, it is only natural that

you expect the same temperature where your sofa is placed for instance. However,

the temperature sensor is placed on the product itself, and therefore a deviation in

temperature may occur. To adjust this, all Mill heaters are equipped with a calibration

function, which enables you to adjust the temperature registered by the heater. N.B!

The room must have achieved a stable temperature before any calibration.

Press 2 times and use + or – to set the actual temperature observed in the room.

Memory function

The heater remembers all the temperature settings and will automatically return to

again.

11

millheat.com

EN

Mill International AS

Grini Næringspark 10

1361 Østerås

Norway

www.millheat.com

Maintenance

Warranty

Waste disposal

1. For cleaning, always unplug the heater and leave it to cool.

2. Wipe the heater regularly with a damp cloth and dry the surface before turning on

the heater again.

3. The heater must be cleaned at least once a month during the heating season.

CAUTION! The heater should never be immersed in water.

Avoid using detergents to clean the heater.

Never let any water get inside the heater; this can be hazardous.

4.

5. The heater can be stored in a dry and clean place.

6. If the heater stops working, do not attempt to repair it yourself because it can

The warranty is valid for 2 years. The heater will be repaired or replaced during

this time should any malfunction occur. The warranty applies if the heater is used

according to these instructions and the customer can present a purchase receipt. If

the heater malfunctions in any way, please contact the store where it was purchased

or the importer.

The symbol indicates that this product is not to be disposed of together with

household waste. This product must be delivered to a recycling service or container

for electrical appliances and electronic equipment. This is done to avoid health risks

and prevent harm to the environment. Local businesses (or the environmental station

in your neighborhood) are required by law to accept and recycle such products, as a

means of environmentally sound disposal.

NO

1

Innholdsfortegnelse

S. 2-3

S. 4

S. 5

S. 6

S. 7

S. 8

S. 9

S. 10

S. 11

Viktig sikkerhetsinformasjon

Før førstegangsbruk

Førstegangsbruk

Beskrivelse av ovnen

Deler

Montering

Bruksanvisning mekanisk termostat

Bruk av mekanisk termostat

Bruksanvisning dag/natt termostat

Bruk av dag/natt termostat

Timerfunksjon

Dag- og nattsenking

Slik gjør du for å aktivere dagsenk

Slik gjør du for å aktivere nattsenk

Endre senketemperatur—dag

Endre senketemperatur—natt

Endre antall timer—dag

Endre antalI timer—natt

Kansellere (hoppe over) senkeprogrom

Slette senkeprogrom

Kalibrering av temperatur

Resette ovnen

Huskefunksjon

Vedlikehold

Garanti

Avfallshåndtering

|

Vennligst les bruksanvisningen nøye før bruk.

Ta godt vare på denne bruksanvisningen for

senere bruk.

FOR Å UNNGÅ OVEROPPHETING,

IKKE DEKK TIL OVNEN.

TA VARE PÅ DENNE

BRUKSANVISNINGEN!

HA ALDRI VÅTE HENDER PÅ-

ELLER DEKK TIL OVNEN!

millheat.com

NO

2

Vanlige sikkerhetsregler må alltid følges ved bruk av elektriske

artikler, spesielt når barn er tilstede.

ADVARSEL! For å unngå elektrisk støt eller skader på

grunn av varme, pass alltid på at støpselet er trukket ut

før

LES BRUKSANVISNINGEN NØYE

• Produktet er kun beregnet for hjemmebruk

• Sørg for at ovnen kobles til husets vanlige strømnett slik ovnens

merke viser

• Nye ovner vil avgi en egen lukt når den brukes første gang. Dette

gir seg etter en kort stund og er helt ufarlig

• Sjekk at det ikke har falt rester (isopor/papp) fra innpakningen

ned

ubehagelig lukt

• Unngå at ovnen blir overopphetet- må ikke tildekkes

• over lengre tid

• Vær spesielt oppmerksom hvis ovnen er i bruk i rom hvor barn,

handikappede eller eldre oppholder seg

• Ovnen må ikke stilles opp rett under et elektrisk kontaktpunkt

• Ledningen må ikke legges under tepper av noe slag. Påse at den

ligger på en slik måte at ingen kan snuble i den

• Ovnen må ikke brukes hvis ledningen eller kontakten er skadet.

Den må ikke brukes hvis den har falt i bakken (gulvet) eller er

skadet på annen måte, slik at den ikke fungerer normalt

• Hvis ledningen blir skadet må denne bli reparert av en fagperson

for å unngå farlige situasjoner

• Unngå å bruke skjøteledning, da en slik ledning kan bli

overopphetet og muligens starte en brann

•

brukes i rom med vanlige rette gulv

Viktig sikkerhetsinformasjon

NO

3

• Ovnen må ikke monteres rett ved brennbart materiale av noe

slag da det alltid kan være en fare for brann

• Ovnen må aldri brukes i rom hvor det lagres bensin, maling eller

andre lett antennelige væsker som for eks. i en garasje

• Ta aldri på en elektrisk ovn med våte hender. Ovnen monteres/

plasseres slik at en person som dusjer eller tar et bad ikke kan

komme i direkte kontakt med den

• Enkelte deler av denne ovnen kan bli veldig varme og

forårsake brennmerker på huden. Vær ekstra oppmerksom

når barn og sårbare personer er tilstede

• Ovnen må være skrudd av, kontakten tatt ut og ovnen være

• Unngå overbelastning på strømnettet (kursen) hvor ovnen er

tilkoblet. Ta hensyn hvis andre elektriske apparater er koblet til

samme strømuttak eller kurs

• Bruk aldri ovnen i små rom hvor personer som ikke er i stand til

å forlate rommet av seg selv oppholder seg, med mindre de er

under konstant tilsyn

• Produktet kan ikke benyttes av barn under 8 år og personer

med

erfaring og kunnskap, om de ikke får tilsyn eller instruksjoner

om bruk av produktet på en sikker måte og forstår farene

som er involvert

• Barn skal ikke leke med produktet. Rengjøring og vedlikehold

skal ikke utføres av barn uten tilsyn

• Barn under 3 år skal holdes unna produktet med mindre de

har kontinuerlig tilsyn

• Barn i alderen 3 til 8 år kan kun slå AV/PÅ produktet, forutsatt

at ovnen er montert slik monteringsanvisningen viser, og

barna har fått instruksjon eller tilsyn vedrørende bruk av

produktet på en sikker måte og forstår farene som er involvert

• Bruk aldri denne varmeovnen i nærheten av badekar, dusj

eller svømmebasseng

ADVARSEL! Ovnen må ikke brukes hvis glasspanelet er skadet

(gjelder kun AB-H1000DN GLASS).

millheat.com

NO

4

Før førstegangsbruk

Førstegangsbruk

Beskrivelse av ovnen

Etter utpakking av produktet, kontroller om det er noen transportskader. Skulle det

være synlige skader på produktet, ta kontakt med butikken eller importør.

Ta vare på ytteremballasjen for senere transport av ovnen. Om du ønsker å kaste

emballasjen, sørg for at den blir kastet på forsvarlig vis. Hold plastposer unna barn.

Etter å ha skrudd på produktet første gang, eller etter et lengre opphold, vil det kunne

lukte “brent” i en kort periode. Dette er normalt.

Vennligst les hele denne bruksanvisningen nøye før bruk. Ta vare på bruksanvisningen

for senere bruk.

Det er også vanlig at produktet lager "lyder" i opp/ned-varmingsfasen.

Vennligst se tabelloversikt over for hvilke modeller som har mekanisk/dag- og natt

termostat.

Dag/natt termostat

og Mekanisk termostat

Modell Termostat Farge Strømstyrke (W)

Mill Heat

Boost

AB-H1000MEC Mekanisk Hvit 220-240V~, 50-60Hz 1000 Ja

AB-H1000DN Dag/natt Hvit 220-240V~, 50-60Hz 1000 Ja

AB-H1500DN Dag/natt Hvit 220-240V~, 50-60Hz 1500 Ja

AB-H2000DN Dag/natt Hvit 220-240V~, 50-60Hz 2000 Ja

AB-H1000DN GLASS Dag/natt Hvit 220-240V~, 50-60Hz 1000 Ja

AB-H1000DN BLACK Dag/natt Sort 220-240V~, 50-60Hz 1000 Ja

A B C

1. Utslipp varme

2. LED display

3. Knapper

4.

5. AV/PÅ

6. Ben (aluminium)

1. Utslipp varme

2. Indikatorlys

3. Temperaturvelger

4.

5. Ben (aluminium)

NO

5

Deler

Montering

Bruksanvisning mekanisk termostat

1. 2 stk skinner til fot

2. 2 stk fotbraketter

3. 8 stk skruer (premontert)

1. Skru ut de premonterte skruene på begge bena før du fører de inn i brakettene, slik

at du får en fullverdig fot

2. Fest bena til brakettene ved å skru inn 2 skruer i hver brakett

3. Skru ut de premonterte skruene fra undersiden av ovnen og plasser ovnen forsiktig

på hodet for påmontering av fot

4. To skruer må festes i hver fotbrakett

5. BRUK ALDRI OVNEN FØR BENA ER SKRUDD ORDENTLIG PÅ

Vennligst se tabelloversikt side 4 for hvilke modeller som har mekanisk termostat.

Kontrollpanel

1. Indikatorlys

2. Termostat: Justere ønsket varme

3.

0: AV

I: Lav

II: Medium

III: Høy

ADVARSEL! FØR OVNEN BRUKES, VÆR SIKKER PÅ AT FOTEN ER MONTERT RIKTIG I

FØLGE MONTERINGSANVISNINGEN!

Deler

Montering

Bruksanvisning mekanisk termostat

millheat.com

NO

6

Bruk av mekanisk termostat

1.

jordet stikkontakt

2.

Når den ønskede romtemperaturen er oppnådd, skru termostaten sakte tilbake til

du hører et klikk. Termostaten kan nå stå på dette punktet inntil ny romtemperatur

ønskes. Så snart romtemperaturen synker under dette nivået, vil ovnen automatisk

starte igjen. Når rommet igjen har nådd den ønskede romtemperatur, så vil ovnen

skru seg av igjen.

3. Om en ønsker å endre romtemperaturen, gjenta punkt 2

4. Ovnen har et overopphetingsvern som stenger ovnen om noen deler blir ekstremt

varme

5.

lengre tid, trekk ut støpselet

Vennligst se tabelloversikt side 4 for hvilke modeller som har dag/natt termostat.

Kontrollpanel

1. Standby

2. Dagsenking

3. Nattsenking

4. Strømindikator – viser om ovnen trekker strøm eller ikke

5. Ønsket romtemperatur

6,7,8

9. Timerfunksjon

10. Aktiveringsknapp dagsenking

11. Aktiveringsknapp nattsenking

12. Funksjonsknapp

13. Aktiveringsknapp timerfunksjon

14.

i. Vri til venstre for å redusere ønsket temperatur, og vri til høyre for å øke ønsket

temperatur

ii.

ADVARSEL! FØR OVNEN BRUKES, VÆR SIKKER PÅ AT FOTEN ER MONTERT RIKTIG I

FØLGE MONTERINGSANVISNINGEN!

Om temperatursensoren ikke fungerer slik den skal vil du se dette

symbolet i displayet. Vennligst kontakt forhandler eller importør.

Bruksanvisning dag/natt termostat

NO

7

Bruk av dag/natt termostat

1. Sett støpslet i en jordet stikkontakt.

2. Trykk inn AV/PÅ knappen

3.

ønsket romtemperatur ved å se i displayet. Så snart romtemperaturen synker under

dette nivået, vil ovnen automatisk starte igjen. Når rommet igjen har nådd den

ønskede romtemperatur, så vil ovnen skru seg av igjen.

4. Termostaten går fra 5 til 35 grader Celsius

5. Om en ønsker å endre romtemperaturen, gjenta punkt 3

6. Ovnen har et overopphetingsvern som stenger ovnen om noen deler blir ekstremt

varme

7. For å skru av ovnen, trykk inn AV/PÅ knappen. Om ovnen skal forlates over lengre

tid, trekk ut støpselet

Timerfunksjon

Timerfunksjonen vil skru av ovnen etter at det ønskede antaII timer har passert.

Dag- og nattsenking

Når du programmerer ovnen for enten dag- eller nattsenking, så vil senkeperioden

være aktiv fra det tidspunktet du programmerer ovnen. Det vil si at om du ønsker at

en dagsenking begynner kl 07.30, så må du programmere dagsenkingen kl 07.30.

Du trenger kun å programmere ovnen 1 gang for dagsenking og 1 gang for

nattsenking. Om du har programmert ovnen vil programmene være aktiv på

følgende dager:

Dagsenking: Mandag-Fredag (dag 1-5)

Nattsenking: Alle netter

EKSEMPEL:

La oss si at du ønsker å programmere ovnen for både dag- og nattsenking (normalt

står ovnen eksempelvis på 23 grader). Du ønsker at den skal gjøre følgende:

1. Dagsenk skal være aktiv fra kl 07.30 til kl 14.30. Ønsket temperatur: 17 grader

2. Nattsenk skal være aktiv fra kl 22.00 til 06.00. Ønsket temperatur: 18 grader

Page is loading ...

MILL OIL PREMIUM MEC 1000W OLJEOVN User manual

MILL OIL PREMIUM MEC 1000W OLJEOVN User manual

in other languages

Related papers

Other documents