29/05/2018
e-text
quick guide
Connection to GSM500 TEXT
− Connect DB-9 connector of GSM500 TEXT to an USB port of your
PC
− Power on the GSM500 TEXT
Setting
− Open e-text software
− Set the USB port:
Options menu → Settings
. Enable the device that will be used
. Select the USB port connected to GSM500 TEXT
. Click OK
Multi-recipient SMS
− Click Multi-recipient SMS
− Click Import
− Select a .CSV file with the destination numbers list that will receive
the SMS and click Open
− Type the SMS text in the form “Text”
− Press OK
The list of SMSs to send will be show in the main window.
− To send the SMS click GO!
-
1
