Mobotix MOVE 20MP Multisensor IR Video Analytics Camera User guide

User Guide

MOBOTIX MOVE 20MPMultisensor IRVideo Analytics Camera

©2023MOBOTIX AG

V1.03_11/22/2023, Order Code: Mx-VM1A-20-IR-VA

Table of Contents

Table of Contents 2

Before You Start 5

Support 6

MOBOTIX Support 6

MOBOTIX eCampus 6

MOBOTIX Community 6

Safety Notes 6

Legal Notes 7

Overview 9

Features 10

Package Contents 10

Dimensions 12

Accessories 13

Further Reading 15

Connection 17

Camera Cabling 18

Camera Connectors 19

microSD Card Slots 20

M.2 SSD Card Slot 20

Reset Button 20

Formatting Internal Storage Media 20

Connecting Power 21

Connecting Ethernet Cable 21

Connecting Audio and Alarm I/O 22

Installation 25

General Remarks 26

Camera Installation 26

Installing to a Ceiling or Wall Without Accessories 26

Installing the Camera With Accessories 27

Configuration 29

System Requirements for Operating the Camera 30

Accessing the Camera 30

Setting the Video Resolution 32

Default Resolution 32

2 / 120

Exporting/Importing Configuration Files 33

Menu Reference 35

The Camera Menu 37

The “Home” Tab 38

Function Items on Home Page 39

The “System” Tab 42

System 42

Security 44

Network 51

DDNS 58

Mail 59

FTP 59

HTTP 59

Events (Alarm Settings) 60

Storage Management 73

Recording 77

Schedule 78

File Location (Snapshots and Web Recording) 79

View Information 79

Factory Default 80

Software Version 81

Software Upgrade 81

Maintenance 82

The “Streaming” Tab 83

Video Configuration 84

Video Rotation 87

Video Text Overlay 88

Video ROI Encoding 89

Video OCX Protocol 90

Video Mask 90

Audio (Audio Mode and Bit Rate Settings) 91

The “Camera” Tab 93

Camera Selector 93

Exposure 93

White Balance 95

Picture Adjustment 98

Color Style 99

IR Function 99

Table of Contents

3 / 120

Table of Contents

Illumination 101

Noise Reduction 101

HDR Type 102

Gamma HDR 102

Digital Zoom 103

Profile 103

TV System 104

The “Logout” Tab 105

Appendix A: Installing UPnP Components 106

Appendix B: Converting IP Addresses from Decimal to Binary 106

AppendixC: List of Open/Closed IP Ports 108

TCP Protocol 108

UDP Protocol 108

Technical Support Information 111

Technical Specifications 112

4 / 120

5 / 120

Before You Start

This section contains the following information:

Support 6

MOBOTIX Support 6

MOBOTIX eCampus 6

MOBOTIX Community 6

Safety Notes 6

Legal Notes 7

1

Before You Start

Support

MOBOTIX Support

If you need technical support, please contact your MOBOTIX dealer. If your

dealer cannot help you, he will contact the support channel to get an answer for

you as quickly as possible.

If you have internet access, you can open the MOBOTIX help desk to find addi-

tional information and software updates.

Please visit www.mobotix.com > Support > Help Desk.

MOBOTIX eCampus

The MOBOTIX eCampus is a complete e-learning platform. It lets you decide

when and where you want to view and process your training seminar content.

Simply open the site in your browser and select the desired training seminar.

Please visit www.mobotix.com/ecampus-mobotix.

MOBOTIX Community

The MOBOTIX community is another valuable source of information. MOBOTIX

staff and other users are sharing their information, and so can you.

Please visit community.mobotix.com.

Safety Notes

nThis camera must be installed by qualified personnel and the installation should conform to all

local codes.

6 / 120

nThis product must not be used in locations exposed to the dangers of explosion.

nDo not look directly into the infra-red LEDs that may be active on the product.

nDo not use this product in a dusty environment.

nProtect this product from moisture or water entering the housing.

nInstall this product as outlined in this document. A faulty installation can damage the

product!

nDo not replace batteries of the camera. If a battery is replaced by an incorrect type, the bat-

tery can explode.

nThis equipment is not suitable for use in locations where children are likely to be present.

nExternal power supplies must comply with the Limited Power Source (LPS) requirements and

share the same power specifications with the camera.

nWhen using a ClassI adapter, the power cord shall be connected to a socket-outlet with

proper ground connection.

nTo comply with the requirements of EN 50130-4 regarding the power supply of alarm systems

for 24/7 operation, it is highly recommended to use an uninterruptible power supply (UPS) for

backing up the power supply of this product.

NOTE! Observe the MOBOTIX MOVE Installation Hints document to ensure optimum performance

of the camera features.

Legal Notes

Legal Aspects of Video and Sound Recording

You must comply with all data protection regulations for video and sound monitoring when using

MOBOTIX AG products. Depending on national laws and the installation location of the cameras, the

recording of video and sound data may be subject to special documentation or it may be pro-

hibited. All users of MOBOTIX products are therefore required to familiarize themselves with all

applicable regulations and to comply with these laws. MOBOTIX AG is not liable for any illegal use of

its products.

Declaration of Conformity

The products of MOBOTIX AG are certified according to the applicable regulations of the EC and

other countries. You can find the declarations of conformity for the products of MOBOTIX AG on

www.mobotix.com under Support> Download Center> Marketing & Documentation> Cer-

tificates & Declarations of Conformity.

Before You Start

Legal Notes

7 / 120

Before You Start

Legal Notes

RoHS Declaration

The products of MOBOTIX AG are in full compliance with European Unions Restrictions of the Use of

Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS Directive 2011/65/EC) as

far as they are subject to these regulations (for the RoHS Declaration of MOBOTIX, please see www.-

mobotix.com, Support> Download Center> Marketing & Documentation> Brochures & Guides>

Certificates).

Disposal

Electrical and electronic products contain many valuable materials. For this reason, we recommend

that you dispose of MOBOTIX products at the end of their service life in accordance with all legal

requirements and regulations (or deposit these products at a municipal collection center). MOBOTIX

products must not be disposed of in household waste! If the product contains a battery, please dis-

pose of the battery separately (the corresponding product manuals contain specific directions if the

product contains a battery).

Disclaimer

MOBOTIX AG does not assume any responsibility for damages, which are the result of improper use

or failure to comply to the manuals or the applicable rules and regulations. Our General Terms and

Conditions apply. You can download the current version of the General Terms and Conditions from

our website at www.mobotix.com by clicking on the corresponding link at the bottom of every page.

8 / 120

9 / 120

Overview

This section contains the following information:

Features 10

Package Contents 10

Dimensions 12

Accessories 13

Further Reading 15

2

Overview

Features

The MOBOTIX MOVE 20MPMultisensor IRVideo Analytics Camera incorporates four individually

adjustable 5MP sensors with remote zoom/focus lenses for optimum positioning and alignment to

the observation needs. Four individual video streams plus a combined stream of all four sensors that

provides an undistorted view up to 360 degrees make this camera the best choice for monitoring

large areas or road intersections. The integrated DNN-based video analytics features include Face

and License Plate recognition for 24/7 video surveillance with simultaneous detection of multiple

objects. The MOBOTIX EverClear superhydrophilic and self-cleaning nano coating of the multisensor

bubble ensures best image quality even in rain and reduces cleaning efforts and operational costs.

n4x 5MP image sensors,

freely adjustable (1/2.8” Pro-

gressive CMOS IMX 675

SONY STARVIS II)

nHigh light sensitivity:

0.02Lux color, 0.001Lux

B/W

nMotorized 3x zoom/focus

lens 2.8 to 8mm

nWDR up to 130dB

nIntegrated IR illumination

up to 30 m/100 ft

nSupports up to nine

streams

H.264/H.265/MJPEG

nIntelligent encoding, smart

low-bitrate control

nBi-directional audio Line

In/Out and integrated

microphone

nMOBOTIX

MxMessageSystem

n2D & 3D motion-com-

pensated noise reduction

(MCTF)

nONVIF Profile S/G/T/M sup-

port

nDNN video analytics (8 VA,

Face & ALPR)

nSmart event functions

nM.2 SATA3 SSD support up

to 8TB

nmicroSD SDHC/SDXC card

support up to 1TB (2 slots)

nTriple power support

(IEEE802.3bt/AC24V/DC24V)

nOutdoor protection rate

IP66/IK10

nNEMA 4x-compliant

nBuilt-in FIPS 140-2 Level 2-

certified TPM hard-

ware/firmware

nTemp. Range –40 to 60°C/-

40 to 140°F with heater

nEverClear coating of multi-

sensor bubble

NOTE! Observe the MOBOTIX MOVE Installation Hints document to ensure optimum performance

of the camera features.

Package Contents

Check the package for the items listed below.

20MPMultisensor IRVideo Analytics Camera

4-pin power terminal block

10 / 120

12-pin alarm & audio terminal block

M3 screw for M.2 SSD (x2)

Plastic screw anchors (x2)

RJ-45 insert tool (x1)

Ground ring (x1)

Self-tapping screws (x5)

Plastic dowel (x5)

#8-32 screw for Junction box (x4)

Overview

Package Contents

11 / 120

Overview

Dimensions

#6-32 screw for Junction box (x2)

M4 screw for Ground wire (x1)

Security Torx wrench

NOTE! To purchase a power adapter, contact MOBOTIX for further information.

NOTE! To use an external power supply, contact the camera manufacturer to confirm that the

power supply complies with the LPS requirements and shares the same power specifications with

the camera.

NOTE! The supplied self-tapping screws are for soft substances/materials such as wood. For other

installation environments, such as solid or sheet rock walls, users MUST pre-drill and use plastic

anchors before fastening the camera onto the wall.

CAUTION! Do not replace batteries of the camera. Risk of explosion may occur if the battery is

replaced by an incorrect type.

Dimensions

NOTE! Download the drilling template from the MOBOTIX website: www.mobotix.com> Support

> Download Center > Marketing & Documentation> Drilling Templates.

CAUTION! Always print or copy the drilling template at 100% of the original size!

12 / 120

Fig. 1: 20MPMultisensor IRVideo Analytics Camera: All measurements in mm

Accessories

Picture Order Code Description

Mx-M-SD-C Corner Mount for MOBOTIX MOVE

Speed Dome cameras (only in com-

bination with Wall Mount Mx-M-SD-

W/WM)

Mx-M-SD-GN Parapet Mount (Gooseneck) with

integrated junction box for

MOBOTIX MOVE Speed Dome cam-

eras

Mx-M-SD-P Pole Mount for MOBOTIX MOVE

Speed Dome cameras (only in com-

bination with Wall Mount Mx-M-SD-

W/WM)

Overview

Accessories

13 / 120

Overview

Accessories

Picture Order Code Description

Mx-M-SD-PM Pendant Mount Kit 25cm for

MOBOTIX MOVE Speed Dome cam-

eras

Mx-M-SD-PMEXT Pendant mount extension 25cm for

use with Pendant Mount Kit Mx-M-

SD-PM

Mx-M-SD-W Wall Mount for MOBOTIX MOVE

Speed Dome cameras; can be com-

bined with Pole Mount Mx-M-SD-P

or Corner Mount Mx-M-SD-C

Mx-M-SD-WM Wall Mount with room for optional

junction box Mx-M-SD-WMJB for

MOBOTIX MOVE Speed Dome cam-

eras

Mx-M-SD-WMJB Wall Mount Junction Box for

MOBOTIX MOVE Speed Dome cam-

eras

Mx-M-VM-IC Ceiling Flush Mount for

20MPMultisensor IRVideo Analytics

Camera

Mx-M-VM-AP Adapter Mounting Plate for

20MPMultisensor IRVideo Analytics

Camera (use with Mx-M-SD-GN, Mx-

M-SD-PM/PMEXT, Mx-M-SD-W, Mx-M-

SD-WM)

Mx-A-VM-DBC Clear Replacement Dome for

20MPMultisensor IRVideo Analytics

Camera

Mx-A-VM-DBT Tinted Replacement Dome for

20MPMultisensor IRVideo Analytics

Camera

14 / 120

Picture Order Code Description

Mx-NPA-PoE1A-60W-BT Network Power Injector 60W

Mx-A-ETP1A-2601-SET Media Converter Set Ethernet

(PoE+) – Twisted-Pair

Further Reading

15 / 120

17 / 120

Connection

This section contains the following information:

Camera Cabling 18

Camera Connectors 19

microSD Card Slots 20

M.2 SSD Card Slot 20

Reset Button 20

Formatting Internal Storage Media 20

Connecting Power 21

Connecting Ethernet Cable 21

Connecting Audio and Alarm I/O 22

3

Connection

Camera Cabling

The camera is rated IP66 to prevent water from entering the camera. However, water might still enter

the camera if it is being improperly installed. Please make sure the warnings below are strictly fol-

lowed when installing the camera.

nPlace all cables and the adapter in dry and well-waterproofed environments, e.g. waterproof

boxes. This will prevent moisture from accumulating inside the camera and from penetrating

cables.

nWhile running cables, slightly bend the cables to a U-shaped curve (see top images in figure

above) to make a low point. This will prevent water from entering the camera along the cables

from above.

nThe cable entry hole of the outdoor mounting kit (see bottom image in figure above) needs to

be sealed with thread seal tape to avoid water from entering the camera.

NOTE!

This camera must be installed by qualified personnel and the installation should conform to all

local codes.

18 / 120

Camera Connectors

No. Connector Definition

1M.2 SSD Card Slot Insert the M.2 SSD card (max. 8TB) into the slot to store videos and

snapshots. Always power off the camera before inserting or removing

any storage media!

2Reset Button Press the button with a proper tool for at least 20 seconds to reset

the system to factory defaults.

3microSD Card

Slots (2)

Insert microSD cards into the slots to store videos and snapshots.

Always power off the camera before inserting or removing any stor-

age media!

4USB Type A Insert a flash drive into the USB slot to store videos and snapshots.

Always power off the camera before inserting or removing any stor-

age media!

5MIC Audio In

6BNC Not available on this camera model.

7BNC Button Not available on this camera model.

8RJ-45 Port For network and PoE connections

9Power Connector AC24V/DC24V power connector (see Camera Cabling, p. 18 below)

10 Audio/Alarm I/O

Connector*

Audio/Alarm I/O connection (see Camera Cabling, p. 18 below)

*Do NOT connect an external power supply to the alarm I/O connector of the camera.

NOTE! To purchase a power adapter, please contact MOBOTIX for further information.

Connection

Camera Cabling

19 / 120

Connection

Camera Cabling

microSD Card Slots

microSD Card Slot

CAUTION! Always power down the camera before performing the following steps!

Insert a microSD card into the card slot to store videos and snapshots.

NOTE!

nIt is not recommended to record with the microSD card for 24/7 continuously, as it may not

be able to support long term continuous data read/write. Contact the manufacturer of the

microSD card for information regarding the reliability and the life expectancy.

nRemember to format a new microSD card as shown in Formatting Storage Media below.

M.2 SSD Card Slot

CAUTION! Always power down the camera before performing the following steps!

Insert a suitable M.2 SSD card (max. 8TB) into the slot and secure it using the supplied M3 screw.

NOTE!

nRemember to format a new SSD card as shown in Formatting Storage Media below.

Reset Button

Press the button with a proper tool for at least 20 seconds to reset the system to factory defaults.

Formatting Internal Storage Media

After inserting a new or replacing a used storage medium, make sure to format the medium so the

camera can use it to record video streams.

1. Connect to the camera.

2. Open System> Storage Management> <storage media type>.

3. In the Device Setting section, click on Format to start the formatting process.

20 / 120

Page is loading ...

Mobotix MOVE 20MP Multisensor IR Video Analytics Camera User guide

Mobotix MOVE 20MP Multisensor IR Video Analytics Camera User guide

Related papers