2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. ATEN
  6. VE-RMK1U
VE-RMK1U

ATEN VE-RMK1U Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the ATEN VE-RMK1U Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What does the ATEN VE-RMK1U consist of?
    How many units can I install on the rack mount frame?
    What is the purpose of the alignment line on the mounting plate?
    What types of mounting options are available?
    How do I install devices with rack ears on the mounting plate?
    What are the steps to install devices without rack ears on the mounting plate?
    Does the ATEN VE-RMK1U include the screws required for the installation?
ATEN Video Extender Rack Mount Kit
VE-RMK1U Quick Start Guide
Package Contents
1 x VE-RMK1U Frame
4 x 1U Mounting Plates
5 x Plastic Captive Screws
6 x Hexagon Head Screws
12 x Countersunk Head Screws
Note: Please make sure that all package
contents are present and that nothing is
damaged in shipping. If you encounter any
problems, contact your local sales
representative for more information.
Installation
Different ATEN devices use different sets of screw holes on the mounting plate to install. Use
the table below to find out:
Whether if your ATEN device is built-in with rack ears
The alignment line that your ATEN device uses
Models
Mounting Plate
Category
Not Equipped with
Rack Ears
Equipped with
Rack Ears
Alignment
Line
CE
CE100
-
Line A
VE
VE560, VE600A, VE602,
VE800A, VE803, VE810
VE601, VE801,
VE811, VE901
VE150A, VE170, VE172R,
VB802
-
Line B
Note: For a full list of supported models, download the VE-RMK1U Installation Guide from the
VE-RMK1U web page.
Installing Devices with Rack Ears
1.
Align the device to its alignment line
as illustrated, latch one of the rack
ears onto the protruded dot on the
mounting plate, and secure the device
to the mounting plate using the
supplied hexagon head screw.
Example: VE801
2.
Position the VE-RMK1U frame on the
front of your rack, align the holes in
the frame with the holes in the rack,
and then secure the frame to the rack
with self-prepared screws.
3.
Follow the steps in Installing Devices to the Rack to finish the installation.
Installing Devices without Rack Ears
1.
Align the device to line A.
Example: VE800A
2.
Secure the device to the mounting
plate from the backside using the
supplied countersunk head
screws.
Example: VE800A
3. F
Follow the steps in Installing Devices to the Rack to finish the installation.
Installing Devices to the Rack
1.
Align your device and mounting plate assembly to one of the slots on the VE-RMK1U
Frame.
2.
Secure the mounting plate to
the frame with a plastic captive
screw provided in the package.
For a device that aligns to line
A, you can install up to 4 units.
Published on May 29, 2020
/