Shimano HB-7600-A Service Instructions

HB-7600-A
Shimano
Brand
Shimano
Model
HB-7600-A
Type
Service Instructions

This manual is also suitable for

Shimano HB-7600-A is a track hub for the rear wheel of a bicycle, designed to provide reliable performance and smooth shifting. It features a robust construction with 110 or 120 spoke holes, ensuring compatibility with a wide range of wheel builds. The hub utilizes a lock ring and lock nut system for secure sprocket attachment, with a recommended tightening torque of 17 to 35 Nm for optimal performance. Additionally, the HB-7600-A is compatible with various sprocket sizes, including 13T, 14T, 15T, and 16T, allowing riders to customize their gearing setup.

Shimano HB-7600-A is a track hub for the rear wheel of a bicycle, designed to provide reliable performance and smooth shifting. It features a robust construction with 110 or 120 spoke holes, ensuring compatibility with a wide range of wheel builds. The hub utilizes a lock ring and lock nut system for secure sprocket attachment, with a recommended tightening torque of 17 to 35 Nm for optimal performance. Additionally, the HB-7600-A is compatible with various sprocket sizes, including 13T, 14T, 15T, and 16T, allowing riders to customize their gearing setup.

HB-7600-R / HB-7710-R
36 H / 32 H / 28 H / 24 H (Option)
110 / 120 mm
Model No.
No. of spoke holes
Overlock nut dimensions
General Safety Information
• Check that the wheels are fastened securely before riding the bicycle. If the wheels are loose
in any way, they may come off the bicycle and serious injury may result.
• Obtain and read the service instructions carefully prior to installing the parts. Loose, worn
or damaged parts may cause the bicycle to fall over and serious injury may occur as a result.
We strongly recommend only using genuine Shimano replacement parts.
• Read these Technical Service Instructions carefully, and keep them in a safe place for later
reference.
Note
• If the wheel becomes stiff and difficult to turn, you should lubricate it with grease.
• Do not apply any lubricant to the inside of the hub, otherwise the grease will come out.
• You should periodically wash the sprockets in a neutral detergent and then lubricate them
again. In addition, cleaning the chain with neutral detergent and lubricating it can be a
effective way of extending the useful life of the sprockets and the chain.
• If the chain keeps coming off the sprockets during use, replace the sprockets and the chain.
• Parts are not guaranteed against natural wear or deterioration resulting from normal use.
• For maximum performance we highly recommend Shimano lubricants and maintenance
products.
WARNING
Truck hub (Rear)
Specifications
No. of sprocket teeth
Sprocket
13T, 14T, 15T, 16T
* Service Instructions in further languages are available at :
http://techdocs.shimano.com
Please note: specifications are subject to change for improvement without notice. (English)
© Aug. 2009 by Shimano Inc. XBC SZK Printed in Japan.
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Installation of the sprocket
Technical Service Instructions
SI-23U0A-001
HB-7600-R
HB-7710-R
Track Hub (Rear)
SI-23U0A-001-00
1
2
After removing the lock ring, use the
TL-SR22 to remove the sprocket from
the hub as shown in the illustration.
Tool
(TL-SR22)
Sprocket
Lock ring
Lock nut
Disassembly
Lock nut double-locking
tightening torque:
17 - 35 N·m {148 - 305 in. lbs.}
  • Page 1 1

Shimano HB-7600-A Service Instructions

HB-7600-A
Shimano
Brand
Shimano
Model
HB-7600-A
Type
Service Instructions
This manual is also suitable for

Shimano HB-7600-A is a track hub for the rear wheel of a bicycle, designed to provide reliable performance and smooth shifting. It features a robust construction with 110 or 120 spoke holes, ensuring compatibility with a wide range of wheel builds. The hub utilizes a lock ring and lock nut system for secure sprocket attachment, with a recommended tightening torque of 17 to 35 Nm for optimal performance. Additionally, the HB-7600-A is compatible with various sprocket sizes, including 13T, 14T, 15T, and 16T, allowing riders to customize their gearing setup.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers