Gilson Porta Wheel User manual

INTRODUCTION

PSA-114 Porta Wheels t either the Gilson Porta-Screen

(PS-3

and PS-4) or the Gilson Sample Splitter (SP-1). Wheels provide

mobility in the laboratory.

ASSEMBLY

Porta-Screens and Sample Splitters are supplied with mounting

holes for fast installation of the Porta Wheels.

To mount Porta Wheels on either machine:

1. Insert cap screw through angle mount of wheel assembly.

2. Insert cap screw through predrilled mounting hole in ma-

chine, keeping the axle of wheel above mounting hole.

3. Install lock washer and nut, and tighten.

PSA-114

SP-1 shown with PSA-114

PS-4 shown with PSA-114

Porta Wheels

PSA-114

OPERATING MANUAL

Rev: 02/2019

PHONE: 800-444-1508 P.O. Box 200, Lewis Center, Ohio 43035-0200

740-548-7298 E-mail: customerservice@gilsonco.com Product Web Page: www.globalgilson.com

FAX: 800-255-5314

740-548-5314