INTRODUCTION
PSA-114 Porta Wheels t either the Gilson Porta-Screen
®
(PS-3
and PS-4) or the Gilson Sample Splitter (SP-1). Wheels provide
mobility in the laboratory.
ASSEMBLY
Porta-Screens and Sample Splitters are supplied with mounting
holes for fast installation of the Porta Wheels.
To mount Porta Wheels on either machine:
1. Insert cap screw through angle mount of wheel assembly.
2. Insert cap screw through predrilled mounting hole in ma-
chine, keeping the axle of wheel above mounting hole.
3. Install lock washer and nut, and tighten.
PSA-114
SP-1 shown with PSA-114
PS-4 shown with PSA-114
Porta Wheels
PSA-114
OPERATING MANUAL
Rev: 02/2019
PHONE: 800-444-1508 P.O. Box 200, Lewis Center, Ohio 43035-0200
740-548-7298 E-mail: customerservice@gilsonco.com Product Web Page: www.globalgilson.com
FAX: 800-255-5314
740-548-5314
/