Maximum load indicator. It ashes in case of overloading.
Salt relling indicator. It lights up when salt relling is needed.
Wi-Fi connection indicator. Remote connection indicator.
Delay start indicator Door lock indicator.
This area can show: the programme duration , the delay time ,
the cycle end , the warning code .
Energy saving indicators.
Child safety lock indicator.
To activate the Child Lock, touch and hold the two buttons:
Spin speed indicator. Temperature indicator. Cold wash.
Option indicators:
Rinse Hold Extra Silent Time Save
Prewash Stain Extra Rinse
Phase indicators:
Washing Rinse Spin
Oko-Mix Steam Anticrease
1. Press the On/O button.
2
2. Turn the programme dial to set the desired
programme.
3. It is possible to change the programme default
setting by means of the corresponding buttons.
7
4. Put the laundry in the drum. Close the door.
5. Pour the detergent and other treatments in the
proper compartments of the detergent dispenser.
6. Start the cycle by use of the Start/Pause button.
6
7. The cycle starts. If the Delay Start has been
selected, the appliance starts the countdown.
5
8. At the and of the programme, remove the laundry.
9. Press the On/O button to switch the appliance o.
The Stand-by function automatically deactivates the
appliance to decrease the energy consumption when
you do not touch any buttons or programme dial for ve
minutes:
• During programme set up, before starting the
cycle. Press On/O button to activate it again. Your
settings are cancelled.
• After the end of the cycle:
Press On/O button to activate it again.
The display shows the cycle end.
STAND BY OPTION
INTERACTIVE DISPLAY DAILY USE