SportsArt A931 User manual

How to Use the A931 Seat Frame Upgrade Tool

SportsArt is carrying out an upgrade on the A931 Abdominal Crunch

machine. We are replacing the seat frame.

For your convenience, we have included a tool to help remove the old seat

frame from the main frame. This tool works somewhat like a crank puller.

Please return this tool to SportsArt after use.

The following explains the use of this tool.

1. First, detach the bolts holding the

seat frame to the main frame (right).

2. Remove the set screw and cover

(not shown). Put the tool in place as

shown below.

3. Insert a 10 mm Allen wrench into

the tool shaft (see arrow). Turn

clockwise to drive the shaft inward,

pulling the seat frame away from

the main frame. This will push the

seat off the main frame.

The tool is not needed during installation of the new seat frame.

Please return the tool to SportsArt. An ARS label (for returning the tool) is

included with the tool. Call 866 709 1750 if you have questions. Thank

you.