s are properly
ushed and cleared to avoid blockage.
1. Always turn off water and relieve pressure before working on your faucet.
1. Clean the faucet with mild soap and water, then wipe the faucet dry with soft cloths.
2. Do not use cleaners which contain acids, harsh chemicals, or abrasives.
3. Repeat steps 1-2 whenever necessary.
Clean all dirt and debris
from supply valves
before proceeding with
installation. If you are
replacing an existing
faucet, remove the faucet
from the sink and clean
the surface thoroughly.
Connect the flexible hoses
to the water supply valves
(left to hot water and right
to cold). Make sure flexible
hoses are securely fastened
before turning on valve.
required.
Installation Guide
WH2070952
4.60”
8.70”
5.71”
9.25”
2.56”
Max 1.38”
5.51”
7.72”
10.25” open handle
-
1
-
2
Whitehaus Collection WH2070952-BN Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
