NavePoint 4334436908 Installation guide

Type
Installation guide

NavePoint 4334436908 is a 4-Post Open Frame Adjustable Rack designed to house and protect your computer equipment. It features adjustable beams that can be set to different depths to accommodate different sizes of equipment. The rack also includes cable management hooks to help keep your cables organized and out of the way. The NavePoint 4334436908 is perfect for use in server rooms, data centers, and other commercial applications.

Here are some of the key features of the NavePoint 4334436908:

  • Adjustable beams for different equipment sizes
  • Cable management hooks to keep cables organized

NavePoint 4334436908 is a 4-Post Open Frame Adjustable Rack designed to house and protect your computer equipment. It features adjustable beams that can be set to different depths to accommodate different sizes of equipment. The rack also includes cable management hooks to help keep your cables organized and out of the way. The NavePoint 4334436908 is perfect for use in server rooms, data centers, and other commercial applications.

Here are some of the key features of the NavePoint 4334436908:

  • Adjustable beams for different equipment sizes
  • Cable management hooks to keep cables organized
4-Post Open Frame Adjustable Rack
www.NavePoint.com
© 2017 NavePoint, LLC
Part Quantity
A Left Vertical Rail x 2
B Right Vertical Rail x 2
C Base Bracket x 2
D Bottom Corner Bracket x 4
E Bottom Center Bracket x 2
F Top Left Corner Bracket x 2
G Top Right Corner Bracket x2
H Top Center Bracket x2
I Top Support Bracket x2
Rev. 201708
Thank you for purchasing a NavePoint product. NavePoint intends this manual to guide you through
a smooth installation of the product. NavePoint assumes that you are qualied in the servicing of
computer equipment and trained in recognizing any hazards that may occur in the installation of this
product. If you have any questions regarding the installation or use of your product, please call us at
888.505.1363.
Assembly Hardware
J M8 Bolt x36
K M* (13mm) Wrench x1
Instructions for Products:
00300598 - 25U
00300599 - 45U
Equipment Mounting
Hardware
25U: 20 sets of M6 Cage Nut, Screw, and Plastic Washer
45U: 40 sets of M6 Cage Nut, Screw, and Plastic Washer.
Cable Management
25U: 16 Cable Management Hooks (L) and
Hook Mounting Screws (M)
45U: 28 Cable Management Hooks (L) and
Hook Mounting Screws (M)
Important information-
Keep this information for further reference.
WARNING
Limitations of Liability: In no event will NavePoint, LLC. (or its ofcers, direc-
tors, employees or agents) be liable for any damages, whether direct or
indirect, special, punitive, incidental or consequential damages (including,
but not limited to, lost prots or revenue, loss of use, lost business opportu-
nities or loss of goodwill) or for the costs of procuring substitute products,
arising out of or in connection with the use of the product, whether such
liability arises from any claim based upon contract, warranty, tort (including
negligence), product liability or otherwise, whether or not seller has been
advised of the possibility of such loss or damage. In no event will seller’s
total cumulative liability, from all causes of action and all theories of liabil-
ity, exceed the total amounts actually paid to seller by customer under the
order that gives rise to any liability hereunder.
The information contained in this document is subject to change
without notice.
NavePoint makes no warranty of any kind with regard to this
material, including, but not limited to the implied warranties of
merchantability and tness for a particular purpose.
NavePoint shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
NavePoint assumes no responsibility for the use, application, or
reliability of the software or hardware that you install into the
product. Always install the heaviest equipment in the bottom.
It is highly recommended that installation of this product be
performed by a qualied and experienced installer. Improper
installation of this product could result in damage to the
product, other equipment, or personal injury. NavePoint cannot
be held responsible for damage to equipment or personal
injury resulting from improper use, installation or the misuse of
information presented in this document.
Examine the package for any damaged or loose parts. If
anything is damaged or missing, contact NavePoint for
assistance. Do not attempt to install or use product if it
has been damaged.
1
2
Create the Adjustable Beams (Installer should deter-
mine what depth they would like and make sure that
each Adjustable Beam is the same depth)
a. Top Adjustable Beam:
i. Attach Top Left Corner Bracket (F) and Top
Right Corner Bracket (G) to Top Center Bracket (H)
using 2 M8 Bolts (J) (Repeat step to create second Top
Adjustable Beam) –
b. Bottom Adjustable Beam:
i. Attach 2 Bottom Corner Brackets (D) to Bottom
Center Bracket (E) using 4 M8 Bolts (J) (Repeat Step to
create second Bottom Adjustable Beam).
Create Left Frame:
a. Layout 1 Top Adjustable Beam
and 1 Bottom Adjustable Beam on a
at surface and Connect Left Vertical
Rail (A) and Right Vertical Rail (B) to
Beams. For the Bottom, use Base
Brackets (C) and 4 M8 Bolts (J). For
the Top, use Top Support Brackets (I)
and 4 M8 Bolts (J).
J
J
J
J
A
B
3
4
Create and Attach Right Frame to the Left Frame.
a. Connect the other Bottom Adjustable Frame and Left Vertical Rail
(A) and Right Vertical Rail (B) to the Base Brackets (C) with 4 M8 Bolts
(J)
b. Connect the other Top Adjustable Frame and Left Vertical Rail (A)
and Right Vertical Rail (B) to the Top Support Brackets (I) using 4 M8
Bolts (J).
Optional Step: Install Cable Manage-
ment Hooks (L) to Vertical Rails with Hook
Mounting Screws (M).
Finished.
L
M
  • Page 1 1
  • Page 2 2
  • Page 3 3

NavePoint 4334436908 Installation guide

Type
Installation guide

NavePoint 4334436908 is a 4-Post Open Frame Adjustable Rack designed to house and protect your computer equipment. It features adjustable beams that can be set to different depths to accommodate different sizes of equipment. The rack also includes cable management hooks to help keep your cables organized and out of the way. The NavePoint 4334436908 is perfect for use in server rooms, data centers, and other commercial applications.

Here are some of the key features of the NavePoint 4334436908:

  • Adjustable beams for different equipment sizes
  • Cable management hooks to keep cables organized

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI