Page is loading ...
HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
Installation
1
DETERMINING THE INSTALLATION
LOCATION
□ You can attach the bracket (A) and catch (B) on the top,
bottom, or side of the cabinet.
A
B
2
INSTALLING THE BRACKET AND
CATCH
□ Use the bracket screws (E) to attach the bracket (A) to
your chosen installation location. Then slide the catch
(B) into the bracket (A).
A
E
B
3
INSTALLING THE DOWEL AND STRIKE
□ Measure and mark the location for the dowel (C) on the door. Ensure this mark aligns with the catch (B) when you close the
door. Use a ø8 drill bit to drill a hole and insert the dowel (C). Place the strike (D) over the dowel (C) and secure in place using
the strike screw (F). Close the cabinet door and then push to open to ensure proper functionality.
F
C
D
Warranty
Subject to the terms of this warranty, the Manufacturer warrants to the original consumer purchaser that the product will be free from
defects in material and workmanship. If the product does not comply with this warranty, the Manufacturer will repair or replace the product
or, at the Manufacturer’s option, refund the purchase price. Repair, replacement, or refund of the original purchase price is your sole remedy
under this or any other warranty on the product, whether expressed or implied. For additional details and questions, please contact Everbilt
Customer Service at 1-800-305-1726.
Use and Care Guide
Push to Open for Door
TOOLS REQUIRED
Phillips screwdriver
PACKAGE CONTENTS
A - Bracket
x 1
B - Catch x 1
C - Dowel
x 1
D - Strike x 1
E - Bracket
screw x 3
D - Strike
screw x 1
Item # 1002 782 618
Model # 9235926
/