704544

Innovera Decor by Palram 704544, 704242, 704527 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Innovera Decor by Palram 704544 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
For your information: in the case of missing or damaged parts, do not return product to store .
Please contact:
Para su información: en caso de que falten piezas o alguna esté dañada, no devuelva el producto a la tienda.
Por favor, contacte con:
18.02_86216_V1
800-999-9459 ext: 332
After Sale Service
customer.ser[email protected]om
@
LEDGE STONE
Interlocking wall panels
LEDGE STONE
85391_18.01_MV-3.2
COR
INNOVERA
BY PALRAM
A member of PALRAM INDUSTRIES Ltd.
800-999-9459 ext: 332
After Sale Service
@
Adhesives
OR OR
EN
General Information prior to installation :
1. Surface and panels must be clean, dry smooth and free of dust, grease, wax and or any other particales priot to installation
2. Clean the back surface of the panel, use a clean cloth and rubbing alcohol
3. Prepare a detailed plan, measure the area planned to be covered to determine how many panels you will need prior to cutting and installing.
4. Adhesives - Use high quality, strong, one component adhesive and sealant based on MS polymer 5
Recommended adhesives:
Everbuild Stixall MS Polymer Grab Sealant
Parabond Transparent PARMSTR MS Polymers Sealant
Akix allbond ms polymer clear sealant
Akix A603-12 clear MS polymer sealant
Hybrid MS Polymer sealant
Hybrix Super 7 - Professional Adhesive & Sealant
Installing the Panels :
Step 1: Prepare a detailed plan, in accordance with your chosen option, measure the area planned to be covered prior to starting the installation.
Step 2: Cut the panels’ edge in accordance with the markings, and according to your chosen option (Step 1)
Step 3: Apply one of the recommended adhesives (see attached list) onto the high points at the panels’ back side (B). Make sure you apply the adhesive
on all spots as well as onto the overlap between the panels (C).
Step 4: Please pay attention to the connection between the panels, it is important to use an adhesive in the connection between the overlapping panels,
press the panels to the wall with your ngers and use a masking tape.
Step 5: Please note the overlap and attachments of the panels
Step 6: If the panels need cutting, please do so in advance using scissors or a utility knife.
Step 7: After installing all the panels and applying masking tape in order to hold them in place, wait for 24 hours until the adhesive dries totally prior to
removing the masking tape.
1 2
Option 1
Option 2
4321
1234
Option 1
Option 2
1234
4321
1 2
Option 1
Option 2
Option 1
Option 2
a
a
a
5 6
Option 1
Option 2
OR
7
master_wall_PianoSteps_v3-2
1
Adhesives
Optional proles
edge/corner
Palram’s 10 years Limited Warranty
Product Details: Innovera Décor 3D Decorative wall panels – Interlocking / Backsplash / Geometrics categories
Palram Applications (1995) Ltd (Company number: 512106824) whose registered office is at Teradion Industrial Park, M.P Misgav 2017400, Israel (“Palram”) warrants that the product will be free from defects in material
or workmanship for a period of ten years from the original date of purchase subject to the definitions, terms and conditions contained in this warranty.
1. Conditions
1.1 This warranty shall be valid only if the product is installed, cleaned, handled and maintained in accordance with Palrams written recommendations.
1.2 Without derogating from the above, damage caused by use of force, incorrect handling, inappropriate use, neglectful use or assembly or maintenance, accidents, impact from foreign objects, vandalism, pollutants, alteration,
painting, connecting, gluing, sealing not in accordance with the user’s manual, or damage resulting from cleaning with incompatible detergents and minor deviations of the product are not covered by this warranty.
1.3 This warranty does not apply to damage resulting from “force majeure”, which includes but is not limited to, hail, storm, tornado, hurricane, blizzard, flood, fire effects.
1.4 This warranty is void if structural parts and components used are not compatible with Palram’s written recommendations.
1.5 This warranty applies only to the original purchaser of the product. It does not extend to any other purchaser or user of the product (including, but not limited to, any person who acquires the product from the original purchaser).
2. Claims and Notifications
2.1 Every warranty claim must be notified in writing to Palram within 30 days after the discovery of the defective product, enclosing the original sales receipt and this warranty.
2.2 The claimant must allow Palram to inspect the product involved and the installation site itself while the product is still in its original position and has not been removed or moved or altered
in any way and/or return the product to Palram for testing.
2.3 Palram reserves the right to investigate independently the cause of any failure.
3. Compensation
3.1 If a claim under this warranty is properly notified and approved by Palram, the purchaser, at Palram’s option, may either (a) purchase a replacement product or part/s;
or (b) receive refund of the original product or part/s purchase price, all in accordance with the following schedule:
3.2 For avoidance of any doubt, calculation for determination regarding compensation for defective part/s, according to the schedule above, will be based on the contribution of the defective part to the original cost of the product.
Palram reserves the right to provide substitutions if the product or any part of it is unavailable or obsolete.
3.3 This warranty does not cover any costs and expenses of removal and installation of the product or taxes or shipping cost or any other direct or indirect loss(es) which may result from the product failure.
4. General Conditions and Limitations
4.1 OTHER THAN HAS BEEN SPECIFICALLY STATED IN THIS WARRANTY, ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PRTICULAR PURPOSE
ARE EXCLUDED SO FAR AS THE LAW PERMITS.
4.2 EXCEPT WHERE WE HAVE SPECIFICALLY STATED IN THIS WARRANTY, PALRAM SHALL NOT BE LIABLE FOR ANY LOSSES OR DAMAGES THE PURCHASER SUFFERS DIRECTLY, INDIRECTLY, OR AS A CONSEQUENCE OF USING, OR IN ANY
OTHER WAY CONNECTED TO THE PRODUCT.
4.3 IF PALRAM IS PROHIBITED UNDER ANY APPLICABLE LAW FROM EXCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN RELATION TO THE PRODUCT, THE DURATION OF ALL SUCH
IMPLIED WARRANTIES IS EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY OR, IF LONGER, THE MAXIMUM PERIOD REQUIRED BY APPLICABLE LAW.
4.4 THE PURCHASER IS SOLELY RESPONSIBLE FOR DETERMINING WHETHER THE HANDLING, STORAGE, ASSEMBLY, INSTALLATION OR USE OF THE PRODUCT IS SAFE AND APPROPRIATE IN ANY LOCATION, FOR ANY GIVEN APPLICATION
OR IN ANY GIVEN CIRCUMSTANCE.
PALRAM IS NOT RESPONSIBLE FOR ANY DAMAGES OR INJURY TO THE PURCHASER, ANY OTHER PERSON OR ANY PROPERTY RESULTING FROM THE IMPROPER HANDLING, STORAGE, INSTALLATION, ASSEMBLY OR USE OF THE
PRODUCT OR THE FAILURE TO FOLLOW THE WRITTEN INSTRUCTIONS REGARDING THE HANDLING, STORAGE, INSTALLATION, ASSEMBLY AND USE OF THE PRODUCT.
4.5 UNLESS OTHERWISE EXPRESSLY INDICATED BY PALRAM, THE PRODUCT IS INTENDED FOR NORMAL RESIDENTIAL AND COMMERCIAL USE ONLY. PALRAM IS NOT RESPONSIBLE FOR ANY LOSS, DAMAGE, COST OR EXPENSE RESULTING
FROM ANY USE OF THE PRODUCT FOR ANY PURPOSE THAT IS NOT RECOMMENDED BY THE WRITTEN INSTRUCTIONS OR THAT IS NOT PERMITTED BY ANY APPLICABLE LEGISLATION OR OTHER CODES IN EFFECT IN THE LOCATION
WHERE THE PURCHASER WILL USE THE PRODUCT.
Period After Purchasing Replacement Product or Part/s Refund
From date of purchase up to end of 1
st
year Free of charge 100%
End of 1
st
year up to end of 2
nd
year purchaser will pay 10% of the original purchase price 90%
End of 2
nd
year up to end of 3
rd
year purchaser will pay 20% of the original purchase price 80%
End of3rd year up to end of 4
th
year purchaser will pay 30% of the original purchase price 70%
End of 4
th
year up to end of 5
th
year purchaser will pay 40% of the original purchase price 60%
End of 5
th
year up to end of 6
th
year purchaser will pay 50% of the original purchase price 50%
End of 6
th
year up to end of 7
th
year purchaser will pay 60% of the original purchase price 40%
End of 7
th
year up to end of 8
th
year purchaser will pay 70% of the original purchase price 30%
End of 8
th
year up to end of 9
th
year purchaser will pay 80% of the original purchase price 20%
End of 9
th
year up to end of 10
th
year purchaser will pay 90% of the original purchase price 10%
EN
COR
INNOVERA
BY PALRAM
/