2. Silicon Labs
  3. Si1140 Development Kit

Silicon Labs Si1140 Development Kit Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Silicon Labs Si1140 Development Kit Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Silicon Laboratories Inc. Copyright © 2013 by Silicon Laboratories Rev. 0.3 6/13
400 W Cesar Chavez
Austin, TX 78701
Internet: www.silabs.com
Si1140 DEVELOPMENT KIT QUICK-START GUIDE
1
Connect the Si1143 Evaluation Board
to the PC using a USB cable. The red
LED near the connector will light.
Si1143 Evaluation Board
USB to PC
This board is compatible with the
Si114x Performance Analysis Tool,
which is a part of the Optical Sensors
Programmer's Toolkit available from
www.silabs.com. Starting the software
will display the main analysis window.
2
Click on Devices, and select the
Evaluation Board from the list (the
board will show up as the letters “TS”
followed by an 8-character serial
number)
3
Check the signals that you wish to
monitor on the picture of the board,
and then press the green Acquisition
arrow to begin data collection.
4
The real-time data will be graphed in
the main window.
5
DS13
DS10
DS11
F326
U3
SILICON LABS
www.silabs.com
Si1143-EB
DS12
F800
U1
U2
DS5
DS9
+5V_IN
P1
DS1
DS3
DS2DS4
DS7
DS6
DS8
In addition to the real-time data
graphed in the main window, any
recognized gestures will be displayed
in separate Group windows.
6
For more information, including supporting software and documentation, please visit the
Silicon Labs Si1140 Development Kit website located at http://www.silabs.com/Si1140DK.
/